| 1. |
- Leleu, A., et al.
(författare)
-
Six transiting planets and a chain of Laplace resonances in TOI-178
- 2021
-
Ingår i: Astronomy and Astrophysics. - : EDP Sciences. - 0004-6361 .- 1432-0746. ; 649
-
Tidskriftsartikel (refereegranskat)abstract
- Determining the architecture of multi-planetary systems is one of the cornerstones of understanding planet formation and evolution. Resonant systems are especially important as the fragility of their orbital configuration ensures that no significant scattering or collisional event has taken place since the earliest formation phase when the parent protoplanetary disc was still present. In this context, TOI-178 has been the subject of particular attention since the first TESS observations hinted at the possible presence of a near 2:3:3 resonant chain. Here we report the results of observations from CHEOPS, ESPRESSO, NGTS, and SPECULOOS with the aim of deciphering the peculiar orbital architecture of the system. We show that TOI-178 harbours at least six planets in the super-Earth to mini-Neptune regimes, with radii ranging from 1.152 to 2.87 Earth radii and periods of 1.91, 3.24, 6.56, 9.96, 15.23, and 20.71 days. All planets but the innermost one form a 2:4:6:9:12 chain of Laplace resonances, and the planetary densities show important variations from planet to planet, jumping from 1.02 to 0.177 times the Earth's density between planets c and d. Using Bayesian interior structure retrieval models, we show that the amount of gas in the planets does not vary in a monotonous way, contrary to what one would expect from simple formation and evolution models and unlike other known systems in a chain of Laplace resonances. The brightness of TOI-178 (H = 8.76 mag, J = 9.37 mag, V = 11.95 mag) allows for a precise characterisation of its orbital architecture as well as of the physical nature of the six presently known transiting planets it harbours. The peculiar orbital configuration and the diversity in average density among the planets in the system will enable the study of interior planetary structures and atmospheric evolution, providing important clues on the formation of super-Earths and mini-Neptunes. -0.070 -0.13 -0.23 -0.061 +0.073 +0.14 +0.28 +0.055
|
|
| 2. |
- Bauer, A., et al.
(författare)
-
Experimental and numerical investigation on cold flat rolling processes of DC04 sheets with special focus on residual stresses
- 2016
-
Ingår i: IOP Conference Series. - : Institute of Physics Publishing (IOPP).
-
Konferensbidrag (refereegranskat)abstract
- The process of cold flat rolling is a widespread industrial technique to manufacture semi-finished products, e.g., for the automotive or homewares industry. Basic knowledge of the process regarding dimensioning and adjustment of defined characteristics is already state of the art. However, a detailed consideration and analysis with respect to local inhomogeneous residual stresses in several process steps mostly remains disregarded. A broad understanding of the process due to the distribution of residual stresses in the workpiece and the direction of the stress tensors allows for a definition of the characteristics of the workpiece even before the actual manufacturing process. For that purpose, it is necessary to perform numerical investigations by means of the finite element analysis (FEA) of cold flat rolling processes. Within this contribution, several approaches for the calibration of the FEA with the real flat rolling process will be addressed and discussed. To ensure that the numerical consideration provides realistic results, this calibration is indispensable. General parameters such as geometry, height reduction, rolling temperature, process time, and the rolling speed are considered as well as a photogrammetric survey, and calculated residual stresses with results of X-ray diffraction (XRD) will be compared. In the course of the experiments, a good agreement between the stress results of the FEA and the XRD was found in the center of the specimen. In combination with the allocation of the stress orientations, the agreement close to the edges is also fine. Some issues that cause differences between the FEA and the experiment are dis-cussed.
|
|
| 3. |
- Cuenca-Cambronero, M., et al.
(författare)
-
Challenges and opportunities in the use of ponds and pondscapes as Nature-based Solutions
- 2023
-
Ingår i: Hydrobiologia. - : Springer Nature. - 0018-8158 .- 1573-5117. ; 850:15, s. 3257-3271
-
Tidskriftsartikel (refereegranskat)abstract
- Ponds and "pondscapes" (networks of ponds) are crucial habitats for biodiversity and for delivering multiple benefits to humans, so-called "Nature's Contribution to People", such as climate mitigation and adaptation to climate change, creation, and maintenance of habitat for biodiversity, water purification, flood mitigation and cultural benefits (e.g., recreational possibilities). However, ponds are not often considered as Nature-based Solutions to provide all these benefits. In addition, there is insufficient knowledge on how to manage and restore ponds to maximise their role to increase the resilience of ecosystems and society to climate change. To facilitate improved implementation of ponds as Nature-based Solutions for the delivery of a wide range of Nature Contributions to People, it is important to generate and integrate biodiversity, ecosystems, societal, economic and policy knowledge. Hence, there is a need for evidence-based guidance to support the broader use of ponds. Here, we review the role of ponds and pondscapes in delivering Nature's Contributions to People and provide an overview of the challenges and opportunities for their broader implementation as Nature-based Solutions. Finally, we propose a conceptual framework that can help the implementation of pond Nature-based Solutions, and that outlines future research needs.
|
|
| 4. |
- Sieber, Maximilian, et al.
(författare)
-
Wear-resistant coatings on aluminium produced by plasma anodising - A correlation of wear properties, microstructure, phase composition and distribution
- 2014
-
Ingår i: Surface & Coatings Technology. - : Elsevier. - 0257-8972 .- 1879-3347. ; 240, s. 96-102
-
Tidskriftsartikel (refereegranskat)abstract
- In the recent decades, various process windows have been found for plasma anodising of aluminium surfaces to produce wear-resistant alumina coatings. The coatings offer a high hardness and provide an excellent bonding to the substrate material, thus preventing spallation under mechanical or tribological load. In the present study, coatings with a high abrasive wear resistance and a hardness of up to 12GPa were produced in an electrolyte of 5g/l sodium metasilicate and 5g/l potassium hydroxide at a current density of 30A/dm2. To understand the reasons for the high wear resistance, the morphology as well as the phase composition and distribution within the coating were examined globally and locally using X-ray diffraction with conventional and grazing incidence and electron backscatter diffraction. The analyses show that the coating globally is comprised of approximately one third of α-alumina, one third of γ-alumina and one third of amorphous alumina with locally varying phase content.
|
|
| 5. |
- Simchen, F., et al.
(författare)
-
Characterisation method of the passivation mechanisms during the pre-discharge stage of plasma electrolytic oxidation indicating the mode of action of fluorides in peo of magnesium
- 2020
-
Ingår i: Coatings. - : MDPI. - 2079-6412. ; 10:10, s. 1-16
-
Tidskriftsartikel (refereegranskat)abstract
- Plasma electrolytic oxidation (PEO) is a method to obtain protective coatings on metallic light-weight construction materials. Here, the workpiece receives a strong anodic polarisation in a suitable aqueous electrolyte, which leads to the formation of a passive layer and a gaseous shell. Afterwards, plasma electrolytic discharges appear on the substrate surface and convert it into a ceramic layer. The properties of the passive layer are influenced by the selected substrate/electrolyte combination and are essential for the PEO process-initiation and characteristics. In this work, a new method for the systematic investigation of the substrate/electrolyte interactions during the pre-discharge stage is presented. The procedure is carried out by a polarisation experiment and allows for a quantitative characterisation of the passivation behavior, based on a small electrolyte volume. The method is used to investigate a literature-known electrical conduction mechanism on passive films formed on magnesium, by cross-comparison between different Mg and Al materials. In addition, the influence of phosphate, glycerol, and fluoride on the passivation behaviour of the Mg alloy AZ31 in an alkaline environment is considered and quantified. The results provide an explanatory approach for the positive influence of toxic fluorides within the electrolyte on the morphology of PEO layers on magnesium.
|
|
| 6. |
- Weigelt, G., et al.
(författare)
-
VLTI-MATISSE chromatic aperture-synthesis imaging of eta Carinae's stellar wind across the Br alpha line Periastron passage observations in February 2020
- 2021
-
Ingår i: Astronomy and Astrophysics. - : EDP Sciences. - 0004-6361 .- 1432-0746. ; 652
-
Tidskriftsartikel (refereegranskat)abstract
- Context. Eta Carinae is a highly eccentric, massive binary system (semimajor axis similar to 15.5 au) with powerful stellar winds and a phase-dependent wind-wind collision (WWC) zone. The primary star, eta Car A, is a luminous blue variable (LBV); the secondary, eta Car B, is a Wolf-Rayet or O star with a faster but less dense wind. Aperture-synthesis imaging allows us to study the mass loss from the enigmatic LBV eta Car. Understanding LBVs is a crucial step toward improving our knowledge about massive stars and their evolution. Aims. Our aim is to study the intensity distribution and kinematics of eta Car's WWC zone. Methods. Using the VLTI-MATISSE mid-infrared interferometry instrument, we perform Br alpha imaging of eta Car's distorted wind. Results. We present the first VLTI-MATISSE aperture-synthesis images of eta Car A's stellar windin several spectral channels distributed across the Br alpha 4.052 mu m line (spectral resolving power R similar to 960). Our observations were performed close to periastron passage in February 2020 (orbital phase similar to 14.0022). The reconstructed iso-velocity images show the dependence of the primary stellar wind on wavelength or line-of-sight (LOS) velocity with a spatial resolution of 6 mas (similar to 14 au). The radius of the faintest outer wind regions is similar to 26 mas (similar to 60 au). At several negative LOS velocities, the primary stellar wind is less extended to the northwest than in other directions. This asymmetry is most likely caused by the WWC. Therefore, we see both the velocity field of the undisturbed primary wind and the WWC cavity. In continuum spectral channels, the primary star wind is more compact than in line channels. A fit of the observed continuum visibilities with the visibilities of a stellar wind CMFGEN model (CMFGEN is an atmosphere code developed to model the spectra of a variety of objects) provides a full width at half maximum fit diameter of the primary stellar wind of 2.84 +/- 0.06 mas (6.54 +/- 0.14 au). We comparethe derived intensity distributions with the CMFGEN stellar wind model and hydrodynamic WWC models.
|
|
| 7. |
- Scharnweber, Kristin, 1983-, et al.
(författare)
-
Effects of predation pressure and resource use on morphological divergence in omnivorous prey fish
- 2013
-
Ingår i: BMC Evolutionary Biology. - : Springer Science and Business Media LLC. - 1471-2148. ; 13
-
Tidskriftsartikel (refereegranskat)abstract
- BackgroundBody shape is one of the most variable traits of organisms and responds to a broad array of local selective forces. In freshwater fish, divergent body shapes within single species have been repeatedly observed along the littoral-pelagic axes of lakes, where the structural complexity of near shore habitats provides a more diverse set of resources compared to the open-water zones. It remains poorly understood whether similar resource-driven polymorphism occurs among lakes that vary in structural complexity and predation pressure, and whether this variation is heritable. Here, we analyzed body shape in four populations of omnivorous roach (Rutilus rutilus) inhabiting shallow lakes. We tested the relationship between body shape, gradients of resources, predation pressure, and, in a subset of two lakes, diet composition. We used genome scans of 331 polymorphic AFLP markers to test whether there was a heritable component to the observed morphological diversification.ResultsBody shape differed among lakes and was significantly correlated to differences in predation pressure. Roach from the lake with highest predation pressure were most divergent from the average body shape of all populations, characterized by a more streamlined body and caudally inserted dorsal fins; features that facilitate predator escape. Surprisingly, diet composition was not associated with morphology. AFLP analysis revealed weak genetic differentiation among lakes and no isolation by distance (IBD). Outlier analysis detected three loci under positive selection with differing frequencies in the four populations. General linear models did not support an association of lake-specific genotypes with morphological variation.ConclusionBody shape was divergent among lakes, suggesting that processes previously reported from within single lakes may also be operating at the scale of whole lakes. We found no evidence for body shape being heritable, although sample size was small in these natural populations. Rather than habitat structure and diet, we conclude that predation had a stronger effect on the prevalence of local morphotypes. A variable morphotype facilitating the efficient uptake of a variety of spatially and temporarily scattered resources seems to be favored in these small aquatic systems.
|
|
| 8. |
- Yuan, Fang, et al.
(författare)
-
450 d of Type II SN 2013ej in optical and near-infrared
- 2016
-
Ingår i: Monthly notices of the Royal Astronomical Society. - : Oxford University Press (OUP). - 0035-8711 .- 1365-2966. ; 461:2, s. 2003-2018
-
Tidskriftsartikel (refereegranskat)abstract
- We present optical and near-infrared photometric and spectroscopic observations of SN 2013ej, in galaxy M74, from 1 to 450 d after the explosion. SN 2013ej is a hydrogen-rich supernova, classified as a Type IIL due to its relatively fast decline following the initial peak. It has a relatively high peak luminosity (absolute magnitude M-V =-17.6) but a small 56Ni production of similar to 0.023 M-circle dot. Its photospheric evolution is similar to other Type II SNe, with shallow absorption in the H a profile typical for a Type IIL. During transition to the radioactive decay tail at similar to 100 d, we find the SN to grow bluer in B - V colour, in contrast to some other Type II supernovae. At late times, the bolometric light curve declined faster than expected from Co-56 decay and we observed unusually broad and asymmetric nebular emission lines. Based on comparison of nebular emission lines most sensitive to the progenitor core mass, we find our observations are best matched to synthesized spectral models with a M-ZAMS = 12-15 M-circle dot progenitor. The derived mass range is similar to but not higher than the mass estimated for Type IIP progenitors. This is against the idea that Type IIL are from more massive stars. Observations are consistent with the SN having a progenitor with a relatively low-mass envelope.
|
|
