| 1. |
- Brodsky, Jan, et al.
(författare)
-
Downsizing the Channel Length of Vertical Organic Electrochemical Transistors
- 2023
-
Ingår i: ACS Applied Materials and Interfaces. - : AMER CHEMICAL SOC. - 1944-8244 .- 1944-8252. ; 15:22, s. 27002-27009
-
Tidskriftsartikel (refereegranskat)abstract
- Organic electrochemical transistors (OECTs) are promisingbuildingblocks for bioelectronic devices such as sensors and neural interfaces.While the majority of OECTs use simple planar geometry, there is interestin exploring how these devices operate with much shorter channelson the submicron scale. Here, we show a practical route toward theminimization of the channel length of the transistor using traditionalphotolithography, enabling large-scale utilization. We describe thefabrication of such transistors using two types of conducting polymers.First, commercial solution-processed poly-(dioxyethylenethiophene):poly-(styrenesulfonate), PEDOT:PSS. Next, we also exploit the short channel lengthto support easy in situ electropolymerization of poly-(dioxyethylenethiophene):tetrabutylammonium hexafluorophosphate, PEDOT:PF6. Both variantsshow different promising features, leading the way in terms of transconductance(g (m)), with the measured peak g (m) up to 68 mS for relatively thin (280 nm) channel layerson devices with the channel length of 350 nm and with widths of 50,100, and 200 & mu;m. This result suggests that the use of electropolymerizedsemiconductors, which can be easily customized, is viable with verticalgeometry, as uniform and thin layers can be created. Spin-coated PEDOT:PSSlags behind with the lower values of g (m); however, it excels in terms of the speed of the device and alsohas a comparably lower off current (300 nA), leading to unusuallyhigh on/off ratio, with values up to 8.6 x 10(4). Ourapproach to vertical gap devices is simple, scalable, and can be extendedto other applications where small electrochemical channels are desired.
|
|
| 2. |
- Derek, Vedran, et al.
(författare)
-
Untangling Photofaradaic and Photocapacitive Effects in Organic Optoelectronic Stimulation Devices
- 2020
-
Ingår i: Frontiers in Bioengineering and Biotechnology. - : FRONTIERS MEDIA SA. - 2296-4185. ; 8
-
Tidskriftsartikel (refereegranskat)abstract
- Light, as a versatile and non-invasive means to elicit a physiological response, offers solutions to problems in basic research as well as in biomedical technologies. The complexity and limitations of optogenetic methods motivate research and development of optoelectronic alternatives. A recently growing subset of approaches relies on organic semiconductors as the active light absorber. Organic semiconductors stand out due to their high optical absorbance coefficients, mechanical flexibility, ability to operate in a wet environment, and potential biocompatibility. They could enable ultrathin and minimally invasive form factors not accessible with traditional inorganic materials. Organic semiconductors, upon photoexcitation in an aqueous medium, can transduce light into (1) photothermal heating, (2) photochemical/photocatalytic redox reactions, (3) photocapacitive charging of electrolytic double layers, and (4) photofaradaic reactions. In realistic conditions, different effects may coexist, and understanding their role in observed physiological phenomena is an area of critical interest. This article serves to evaluate the emerging picture of photofaradaic vs. photocapacitive effects in the context of our groups research efforts and that of others over the past few years. We present simple experiments which can be used to benchmark organic optoelectronic stimulation devices.
|
|
| 3. |
- Gablech, Imrich, et al.
(författare)
-
High-Conductivity Stoichiometric Titanium Nitride for Bioelectronics
- 2023
-
Ingår i: Advanced Electronic Materials. - : WILEY. - 2199-160X. ; 9:4
-
Tidskriftsartikel (refereegranskat)abstract
- Bioelectronic devices such as neural stimulation and recording devices require stable low-impedance electrode interfaces. Various forms of nitridated titanium are used in biointerface applications due to robustness and biological inertness. In this work, stoichiometric TiN thin films are fabricated using a dual Kaufman ion-beam source setup, without the necessity of substrate heating. These layers are remarkable compared to established forms of TiN due to high degree of crystallinity and excellent electrical conductivity. How this fabrication method can be extended to produce structured AlN, to yield robust AlN/TiN bilayer micropyramids, is described. These electrodes compare favorably to commercial TiN microelectrodes in the performance metrics important for bioelectronics interfaces: higher conductivity (by an order of magnitude), lower electrochemical impedance, and higher capacitive charge injection with lower faradaicity. These results demonstrate that the Kaufman ion-beam sputtering method can produce competitive nitride ceramics for bioelectronics applications at low deposition temperatures.
|
|
| 4. |
|
|
| 5. |
- Migliaccio, Ludovico, et al.
(författare)
-
Aqueous photo(electro)catalysis with eumelanin thin films
- 2018
-
Ingår i: Materials Horizons. - : ROYAL SOC CHEMISTRY. - 2051-6347 .- 2051-6355. ; 5:5, s. 984-990
-
Tidskriftsartikel (refereegranskat)abstract
- We report that eumelanin, the ubiquitous natural pigment found in most living organisms, is a photocatalytic material. Though the photoconductivity of eumelanin and its photochemical reactions with oxygen have been known for some time, eumelanins have not been regarded as photofaradaic materials. We find that eumelanin shows photocathodic behavior for both the oxygen reduction reaction and the hydrogen evolution reaction. Eumelanin films irradiated in aqueous solutions at pH 2 or 7 with simulated solar light photochemically reduce oxygen to hydrogen peroxide with accompanying oxidation of sacrificial oxalate, formate, or phenol. Autooxidation of the eumelanin competes with the oxidation of donors. Deposition of thin films on electrodes yields photoelectrodes with higher photocatalytic stability compared with the case of pure photocatalysis, implicating the successful extraction of positive charges from the eumelanin layer. These results open up new potential applications for eumelanin as a photocatalytically-active biomaterial, and inform the growing fundamental body of knowledge about the physical chemistry of eumelanins.
|
|
| 6. |
- Missey, Florian, et al.
(författare)
-
Laser-Driven Wireless Deep Brain Stimulation using Temporal Interference and Organic Electrolytic Photocapacitors
- 2022
-
Ingår i: Advanced Functional Materials. - : WILEY-V C H VERLAG GMBH. - 1616-301X .- 1616-3028. ; 32:33
-
Tidskriftsartikel (refereegranskat)abstract
- Deep brain stimulation (DBS) is a technique commonly used both in clinical and fundamental neurosciences. Classically, brain stimulation requires an implanted and wired electrode system to deliver stimulation directly to the target area. Although techniques such as temporal interference (TI) can provide stimulation at depth without involving any implanted electrodes, these methods still rely on a wired apparatus which limits free movement. Herein organic photocapacitors as untethered light-driven electrodes which convert deep-red light into electric current are reported. Pairs of these ultrathin devices can be driven using lasers at two different frequencies to deliver stimulation at depth via temporally interfering fields. This concept of laser TI stimulation using numerical modeling, tests with phantom brain samples, and finally in vivo tests is validated. Wireless organic photocapacitors are placed on the cortex and elicit stimulation in the hippocampus, while not delivering off-target stimulation in the cortex. This laser-driven wireless TI evokes a neuronal response at depth that is comparable to control experiments induced with deep brain stimulation protocols using implanted electrodes. This work shows that a combination of these two techniques-temporal interference and organic electrolytic photocapacitors-provides a reliable way to target brain structures requiring neither deeply implanted electrodes nor tethered stimulator devices. The laser TI protocol demonstrated here addresses two of the most important drawbacks in the field of DBS and thus holds potential to solve many issues in freely moving animal experiments or for clinical chronic therapy application.
|
|
| 7. |
- Missey, Florian, et al.
(författare)
-
Organic electrolytic photocapacitors for stimulation of the mouse somatosensory cortex
- 2021
-
Ingår i: Journal of Neural Engineering. - : IOP Publishing Ltd. - 1741-2560 .- 1741-2552. ; 18:6
-
Tidskriftsartikel (refereegranskat)abstract
- Objective. For decades electrical stimulation has been used in neuroscience to investigate brain networks and been deployed clinically as a mode of therapy. Classically, all methods of electrical stimulation require implanted electrodes to be connected in some manner to an apparatus which provides power for the stimulation itself. Approach. We show the use of novel organic electronic devices, specifically organic electrolytic photocapacitors (OEPCs), which can be activated when illuminated with deep-red wavelengths of light and correspondingly do not require connections with external wires or power supplies when implanted at various depths in vivo. Main results. We stimulated cortical brain tissue of mice with devices implanted subcutaneously, as well as beneath both the skin and skull to demonstrate a wireless stimulation of the whisker motor cortex. Devices induced both a behavior response (whisker movement) and a sensory response in the corresponding sensory cortex. Additionally, we showed that coating OEPCs with a thin layer of a conducting polymer formulation (PEDOT:PSS) significantly increases their charge storage capacity, and can be used to further optimize the applied photoelectrical stimulation. Significance. Overall, this new technology can provide an on-demand electrical stimulation by simply using an OEPC and a deep-red wavelength illumination. Wires and interconnects to provide power to implanted neurostimulation electrodes are often problematic in freely-moving animal research and with implanted electrodes for long-term therapy in patients. Our wireless brain stimulation opens new perspectives for wireless electrical stimulation for applications in fundamental neurostimulation and in chronic therapy.
|
|
| 8. |
- Say, Mehmet Girayhan, 1992-, et al.
(författare)
-
Ultrathin Paper Microsupercapacitors for Electronic Skin Applications
- 2022
-
Ingår i: Advanced Materials Technologies. - : John Wiley and Sons Inc. - 2365-709X. ; 7:8
-
Tidskriftsartikel (refereegranskat)abstract
- Ultrathin devices are rapidly developing for skin-compatible medical applications and wearable electronics. Powering skin-interfaced electronics requires thin and lightweight energy storage devices, where solution-processing enables scalable fabrication. To attain such devices, a sequential deposition is employed to achieve all spray-coated symmetric microsupercapacitors (μSCs) on ultrathin parylene C substrates, where both electrode and gel electrolyte are based on the cheap and abundant biopolymer, cellulose. The optimized spraying procedure allows an overall device thickness of ≈11 µm to be obtained with a 40% active material volume fraction and a resulting volumetric capacitance of 7 F cm−3. Long-term operation capability (90% of capacitance retention after 104 cycles) and mechanical robustness are achieved (1000 cycles, capacitance retention of 98%) under extreme bending (rolling) conditions. Finite element analysis is utilized to simulate stresses and strains in real-sized μSCs under different bending conditions. Moreover, an organic electrochromic display is printed and powered with two serially connected μ-SCs as an example of a wearable, skin-integrated, fully organic electronic application. © 2022 The Authors.
|
|
| 9. |
- Silverå Ejneby, Malin, et al.
(författare)
-
Chronic electrical stimulation of peripheral nerves via deep-red light transduced by an implanted organic photocapacitor
- 2022
-
Ingår i: Nature Biomedical Engineering. - : NATURE PORTFOLIO. - 2157-846X. ; 6:6, s. 741-753
-
Tidskriftsartikel (refereegranskat)abstract
- Implantable devices for the wireless modulation of neural tissue need to be designed for reliability, safety and reduced invasiveness. Here we report chronic electrical stimulation of the sciatic nerve in rats by an implanted organic electrolytic photocapacitor that transduces deep-red light into electrical signals. The photocapacitor relies on commercially available semiconducting non-toxic pigments and is integrated in a conformable 0.1-mm(3) thin-film cuff. In freely moving rats, fixation of the cuff around the sciatic nerve, 10 mm below the surface of the skin, allowed stimulation (via 50-1,000-mu s pulses of deep-red light at wavelengths of 638 nm or 660 nm) of the nerve for over 100 days. The robustness, biocompatibility, low volume and high-performance characteristics of organic electrolytic photocapacitors may facilitate the wireless chronic stimulation of peripheral nerves. An organic electrolytic photocapacitor transducing deep-red light into electrical signals and implanted within a thin cuff around the sciatic nerve of rats allows for wireless electrical stimulation of the nerve for over 100 days.
|
|
| 10. |
- Silverå Ejneby, Malin, et al.
(författare)
-
Extracellular Photovoltage Clamp Using Conducting Polymer-Modified Organic Photocapacitors
- 2020
-
Ingår i: Advanced Materials Technologies. - : WILEY. - 2365-709X. ; 5:3
-
Tidskriftsartikel (refereegranskat)abstract
- Optoelectronic control of physiological processes accounts for new possibilities ranging from fundamental research to treatment of disease. Among nongenetic light-driven approaches, organic semiconductor-based device platforms such as the organic electrolytic photocapacitor (OEPC) offer the possibility of localized and wireless stimulation with a minimal mechanical footprint. Optimization of efficiency hinges on increasing effective capacitive charge delivery. Herein, a simple strategy to significantly enhance the photostimulation performance of OEPC devices by employing coatings of the conducting polymer formulation poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate), or PEDOT:PSS is reported. This modification increases the charge density of the stimulating photoelectrodes by a factor of 2-3 and simultaneously decreases the interfacial impedance. The electrophysiological effects of PEDOT:PSS-derivatized OEPCs on Xenopus laevis oocyte cells on membrane potential are measured and voltage-clamp techniques are used, finding an at-least twofold increase in capacitive coupling. The large electrolytic capacitance of PEDOT:PSS allows the OEPC to locally alter the extracellular voltage and keep it constant for long periods of time, effectively enabling a unique type of light-controlled membrane depolarization for measurements of ion channel opening. The finding that PEDOT:PSS-coated OEPCs can remain stable after a 50-day accelerated ageing test demonstrates that PEDOT:PSS modification can be applied for fabricating reliable and efficient optoelectronic stimulation devices.
|
|
