| 1. |
- Dey, Lankeswar, et al.
(författare)
-
Authenticating the Presence of a Relativistic Massive Black Hole Binary in OJ 287 Using Its General Relativity Centenary Flare : Improved Orbital Parameters
- 2018
-
Ingår i: Astrophysical Journal. - : American Astronomical Society. - 0004-637X .- 1538-4357. ; 866:1
-
Tidskriftsartikel (refereegranskat)abstract
- Results from regular monitoring of relativistic compact binaries like PSR 1913+16 are consistent with the dominant (quadrupole) order emission of gravitational waves (GWs). We show that observations associated with the binary black hole (BBH) central engine of blazar OJ 287 demand the inclusion of gravitational radiation reaction effects beyond the quadrupolar order. It turns out that even the effects of certain hereditary contributions to GW emission are required to predict impact flare timings of OJ 287. We develop an approach that incorporates this effect into the BBH model for OJ 287. This allows us to demonstrate an excellent agreement between the observed impact flare timings and those predicted from ten orbital cycles of the BBH central engine model. The deduced rate of orbital period decay is nine orders of magnitude higher than the observed rate in PSR 1913+16, demonstrating again the relativistic nature of OJ 287's central engine. Finally, we argue that precise timing of the predicted 2019 impact flare should allow a test of the celebrated black hole no-hair theorem at the 10% level.
|
|
| 2. |
- Graco-Roza, Caio, et al.
(författare)
-
Distance decay 2.0 – A global synthesis of taxonomic and functional turnover in ecological communities
- 2022
-
Ingår i: Global Ecology and Biogeography. - : Wiley. - 1466-822X .- 1466-8238. ; 31:7, s. 1399-1421
-
Tidskriftsartikel (refereegranskat)abstract
- Aim: Understanding the variation in community composition and species abundances (i.e., beta-diversity) is at the heart of community ecology. A common approach to examine beta-diversity is to evaluate directional variation in community composition by measuring the decay in the similarity among pairs of communities along spatial or environmental distance. We provide the first global synthesis of taxonomic and functional distance decay along spatial and environmental distance by analysing 148 datasets comprising different types of organisms and environments.Location: Global.Time period: 1990 to present.Major taxa studied: From diatoms to mammals.Method: We measured the strength of the decay using ranked Mantel tests (Mantel r) and the rate of distance decay as the slope of an exponential fit using generalized linear models. We used null models to test whether functional similarity decays faster or slower than expected given the taxonomic decay along the spatial and environmental distance. We also unveiled the factors driving the rate of decay across the datasets, including latitude, spatial extent, realm and organismal features.Results: Taxonomic distance decay was stronger than functional distance decay along both spatial and environmental distance. Functional distance decay was random given the taxonomic distance decay. The rate of taxonomic and functional spatial distance decay was fastest in the datasets from mid-latitudes. Overall, datasets covering larger spatial extents showed a lower rate of decay along spatial distance but a higher rate of decay along environmental distance. Marine ecosystems had the slowest rate of decay along environmental distances.Main conclusions: In general, taxonomic distance decay is a useful tool for biogeographical research because it reflects dispersal-related factors in addition to species responses to climatic and environmental variables. Moreover, functional distance decay might be a cost-effective option for investigating community changes in heterogeneous environments.
|
|
| 3. |
|
|
| 4. |
- Huang, B. T., et al.
(författare)
-
Towards Production of gamma-valerolactone via Hydrogenation of Aqueous Levulinic Acid
- 2015
-
Ingår i: International Journal of Chemical Reactor Engineering. - : Walter de Gruyter GmbH. - 1542-6580 .- 2194-5748. ; 13:1, s. 119-127
-
Tidskriftsartikel (refereegranskat)abstract
- Synthesis of GVL (gamma-valerolactone) via hydrogenation of aqueous LA (levulinic acid) with H-2 over heterogeneous catalyst (Ru/C) was investigated. In the first part, a study of the influence of various operating conditions was conducted including that of temperature (90-180 degrees C), stirring rate (500-1200 rpm), catalyst loading (0.1-2.0 g), hydrogen pressure (0.4-2.8 MPa) and initial LA concentration (0.5-2 M). In the second part, influence of supercritical CO2 (scCO(2)) on hydrogenation rate and GVL yield were investigated. Hydrogenation of aqueous LA under scCO(2) and under N-2 atmosphere was carried out in batch reactor at 150 degrees C and was compared with the case when no additional gases were present. The result indicated that the use of scCO(2) had no beneficial effect neither in terms of LA conversion nor hydrogenation rate when the amount of hydrogen was relatively low compared to the stoichiometry. This effect was mitigated when more hydrogen was present.
|
|
| 5. |
- Kukkola, J, et al.
(författare)
-
Novel printed nanostructured gas sensors
- 2011
-
Ingår i: Procedia Engineering. - : Elsevier. - 1877-7058. ; 25, s. 896-899
-
Tidskriftsartikel (refereegranskat)abstract
- There is a need for low-cost mass-production circuits on various substrates, possibly performing some simple functions as switches, antennas, displays, and sensors. Also in the field of gas sensors widely used in several applications there is a need for such novel fabrication technologies and materials. In this paper, we present three gas sensor structures fabricated using novel printing techniques. Inkjet and gravure printing techniques were used for fabrication of resistive WO3 nanoparticle gas sensors for detection of NO, and inkjet printing was utilized for fabrication of solid electrolyte (mixture of H3PW12O40 and PVC) in a nanostructured Metal-Electrolyte-Insulator- Semiconductor (MEIS) transistor for detection of H2. The sensor structures were found to be sensitive for detection of NO below 10 ppm, and H2 below 100 ppm concentrations in synthetic air, respectively.
|
|
| 6. |
- Mikkola, T. M., et al.
(författare)
-
Influence of long-term postmenopausal hormone-replacement therapy on estimated structural bone strength: A study in discordant monozygotic twins
- 2011
-
Ingår i: Journal of Bone and Mineral Research. - : Wiley. - 0884-0431. ; 26:3, s. 546-52
-
Tidskriftsartikel (refereegranskat)abstract
- Although postmenopausal hormone-replacement therapy (HRT) is known to prevent fractures, knowledge on the influence of long-term HRT on bone strength and its determinants other than areal bone mineral density is scarce. This study used a genetically controlled design with 24 monozygotic female twin pairs aged 54 to 72 years in which one cotwin was using HRT (mean duration 8 years) and the other had never used HRT. Estimated bone strength, cross-sectional area, volumetric bone mineral density, bone mineral mass, and cross-sectional density and mass distributions were assessed in the tibial shaft, distal tibia, and distal radius with peripheral computed tomography (pQCT). In the tibial shaft, HRT users had 9% [95% confidence interval (CI) 3%-15%] higher estimated bending strength than their nonusing cotwins. Larger cortical area and higher cortical bone mineral density accounted for this difference. The cortex was larger in the HRT users in the endocortical region. In the distal tibia, estimated compressive strength was 24% (95% CI 9%-40%) higher and in the distal radius 26% (95% CI 11%-41%) higher in the HRT users than in their nonusing cotwins owing to higher volumetric bone mineral density. No difference between users and nonusers was observed in total bone cross-sectional area in any measured bone site. The added mineral mass in the HRT users was distributed evenly within and between bone sites. In postmenopausal women, long-term HRT preserves estimated bone strength systemically by preventing bone mineral loss similarly in body weight-loaded and non-weight-loaded bone. (c) 2011 American Society for Bone and Mineral Research.
|
|
| 7. |
- Riittonen, T., et al.
(författare)
-
Direct Synthesis of 1-Butanol from Ethanol in a Plug Flow Reactor : Reactor and Reaction Kinetics Modeling
- 2014
-
Ingår i: Topics in catalysis. - : Springer Science and Business Media LLC. - 1022-5528 .- 1572-9028. ; 57:17-20, s. 1425-1429
-
Tidskriftsartikel (refereegranskat)abstract
- Bio-ethanol is well known for its use as a gasoline additive. However, it can be blended in low portions to traditional gasoline although it has a corrosive nature. By taking advantage of modern continuous reactor technology and heterogeneous alumina catalysts, ethanol can be upgraded to 1-butanol in fixed beds. Butanol has more feasible properties as fuel component in comparison to ethanol. Mathematical modeling of reaction kinetics revealed a simple kinetic model could be used to describe the complex reaction process on a Cu/alumina catalyst. The reaction kinetics model is based on five parallel reactions in which ethanol reacts to 1-butanol, acetealdehyde, ethyl acetate, diethyl ether and diethoxyethane, respectively.
|
|
| 8. |
|
|
| 9. |
- Aid, T., et al.
(författare)
-
Saccharification of lignocellulosic biomasses via ionic liquid pretreatment
- 2016
-
Ingår i: Industrial crops and products (Print). - : Elsevier. - 0926-6690 .- 1872-633X. ; 92, s. 336-341
-
Tidskriftsartikel (refereegranskat)abstract
- The current work focuses on the pretreatment efficiency of ILs combined with heat for woody biomass consisting of spruce, birch and pine as well as winter wheat straw. The latter was investigated as a comparison and with the aim to enhance its digestibility during enzymatic hydrolysis whereby the influence of IL-treatment to cellulose resistance for hydrolysis was investigated. Considering the wood species, the most common and industrially important wood species in Northern Europe were chosen in the present work and the goal was to obtain fermentable sugars and their degradation product, i.e. 5-hydroxymethylfurfural (5-HMF), which is known valuable platform chemical. Further, the differences in the yields of IL-obtainable carbohydrates between these species were studied. The highest sugar yields were obtained to glucose in the case of spruce and arabinose in the case of pine sapwood, 12.07 and 7.72 mmol/L, respectively. The highest 5-HMF yield was obtained for spruce heartwood (9.18 mmol/L) with longer treatment time, such as 100h. However, regarding woody biomass, the present work was focused more on the study and analysis of the IL-containing liquid part, wood hydrolysate, after IL-treatment aiming to answer the analysis challenges related to this fraction.
|
|
| 10. |
|
|
