| 1. |
- Andronic, L., et al.
(författare)
-
Photocatalytic self-cleaning properties of thin films of photochromic yttrium oxyhydride
- 2022
-
Ingår i: Journal of Solid State Chemistry. - : Elsevier. - 0022-4596 .- 1095-726X. ; 316
-
Tidskriftsartikel (refereegranskat)abstract
- Oxyhydride of yttrium (YHO) belongs to an emerging class of materials, with oxide and hydride anions sharingthe same sites in the lattice. Under sunlight irradiation, the material is transparent to visible light with trans-parency exceeding 85% and can absorb about 10% of sunlight. Furthermore, increasing light transmittance in thevisible light enhanced the self-cleaning properties of the coated materials, making these materials promisingcandidates for smart windows applications. However, the light-absorbing properties of the materials wereincreased with exposure time, and in the photodarkening state, they can absorb about 40% of sunlight. Kelvinprobe measurements show work function values between 2.9 and 4.2 eV for YHO, depending on the H2/Arpressure in the deposition chamber. Using the Kelvin probe, we demonstrate that the work function decreaseswith decreasing deposition pressure and hydrogen flow. Measurements under solar light reveal a decrease of workfunction by 0.2 eV followed by a slow relaxation with the light off. Moreover, the self-cleaning test shows that theoxyhydroxide thin films have excellent photocatalytic activity and total self-cleaning in 40 h.
|
|
| 2. |
- Anselmo, Ana Sofia, 1980-, et al.
(författare)
-
Characterisation of vertical phase separation in polymer : fullerene blend films for photovoltaics by dSIMS and NEXAFS
- 2011
-
Ingår i: E-MRS 2011 Spring Meeting. - Malden, MA : John Wiley & Sons. ; , s. 62-63
-
Konferensbidrag (refereegranskat)abstract
- Morphological control and characterization of blend films is key in the development of viable polymer solar cells. Spontaneous formation of vertical compositional gradients during solution processing has been shown for polyfluorene:PCBM blends and rationalized with thermodynamic and kinetic models of nucleation and spinodal decomposition.[1, 2] The extent of vertical stratification is affected by polymer side-chain modification aimed at controlling polymer:fullerene miscibility.[3] Here we present high-resolution film morphology results for several polymer:fullerene systems as obtained from near-edge X-ray fine structure spectroscopy (NEXAFS) in partial and in total electron yield modes. Blend films were found to be polymer- enriched at the surface. Dynamic secondary ion mass spectrometry (dSIMS) and NEXAFS give compositional information at different depths, resulting in a more complete picture of the film morphology.
|
|
| 3. |
- Anselmo, Ana Sofia, 1980-
(författare)
-
Materials aspects in spin-coated films for polymer photovoltaics
- 2013
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Polymer-based photovoltaics have the potential to contribute to boosting photovoltaic energy conversion overall. Besides allowing large-area inexpensive processing, polymeric materials have the added benefit of opening new market applications for photovoltaics due to their low-weight and interesting mechanical properties. The energy conversion efficiency values of polymer photovoltaics have reached new record values over the past years. It is however crucial that stability issues are addressed together with efficiency optimization. Understanding fundamental materials aspects is key in both areas.In the work presented in this thesis, the morphology of polymer:fullerene films and its influence on device performance was studied, as well as the effect of light exposure on the surface of fullerene films. Several polyfluorene copolymers were used for the morphology studies, where the effects of changing spin-coating solvent and of side chain engineering were investigated with dynamic secondary ion mass spectrometry (dSIMS) and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. Polymer-enriched surfaces were found in all blend films, even in the cases with homogeneous distributions in the bulk. Side chain engineering of the polymer led to gradual changes in the compositional variations perpendicular to the surface, and to slight variations in the photocurrent. The electronic structure of the fullerene derivative PCBM was studied in detail and the spectroscopic fingerprint of the materials was analysed by comparison with theoretically simulated spectra. Photo-stability studies done in air showed that the surface of fullerene films underwent severe damages at the molecular level, which is evident from changes in the valence band and X-ray absorption spectra. These changes were explained by transitions from sp2-type to sp3 hybridization of the carbon atoms in the cage that resulted in the destruction of the fullerene cage.
|
|
| 4. |
|
|
| 5. |
- Anselmo, Ana Sofia, 1980-, et al.
(författare)
-
Molecular Orientation and Composition at the Surface of Spin-Coated Polyfluorene:Fullerene Blend Films
- 2013
-
Ingår i: Journal of Polymer Science Part B. - Hoboken, New Jersey : John Wiley & Sons. - 0887-6266 .- 1099-0488. ; 51:3, s. 176-182
-
Tidskriftsartikel (refereegranskat)abstract
- The surface composition in spin-coated films of polyfluorene:fullerene blends was determined quantitatively by near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. By comparing partial and total electron yield spectra, we found vertical compositional differences in the surface region. Furthermore, the orientation of the polymer chains was investigated by variable-angle NEXAFS. Blend films of poly[(9,9-dioctylfluorenyl-2,7-diyl)-co-5,5-(4′,7′-di-2-thienyl-2′,1′,3′-benzothiadiazole] with [6,6]-phenyl-C61-butyric acid methyl ester in two different blend ratios were studied. Results showed polymer enrichment of the surfaces for films with a polymer:fullerene weight ratio of 20:80 and of 50:50, spin-coated from both chlorobenzene and chloroform solutions. The angular dependence of the NEXAFS spectra of the pure polymer films showed a preferential plane-on orientation, which was slightly stronger in the subsurface region than at the surface. In blend films, this orientational preference was less pronounced and the difference between surface and subsurface vanished
|
|
| 6. |
|
|
| 7. |
- Anselmo, Ana Sofia, 1980-, et al.
(författare)
-
Photodegradation of the electronic structure of PCBM and C60 films in air
- 2016
-
Ingår i: Chemical Physics Letters. - : Elsevier. - 0009-2614 .- 1873-4448. ; 652, s. 220-224
-
Tidskriftsartikel (refereegranskat)abstract
- Fullerenes are common electron acceptors in organic solar cells. Here the photostability in air of the electronic structures of spin-coated PCBM ([6,6]-phenyl-C61-butyric acid methyl ester) and evaporated C60 films are studied using ultraviolet photoelectron spectroscopy (UPS) and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. After exposing these materials in air to simulated sunlight, the filled and empty molecular orbitals are strongly altered, indicating that the conjugated π-system of the C60-cage has degraded. Even a few minutes in normal lab light induces changes. These results stress the importance of protecting fullerene-based films from light and air during processing, operation, and storage.
|
|
| 8. |
|
|
| 9. |
|
|
| 10. |
|
|
