1. |
- Jung, Christian, et al.
(författare)
-
A comparison of very old patients admitted to intensive care unit after acute versus elective surgery or intervention
- 2019
-
Ingår i: Journal of critical care. - : W B SAUNDERS CO-ELSEVIER INC. - 0883-9441 .- 1557-8615. ; 52, s. 141-148
-
Tidskriftsartikel (refereegranskat)abstract
- Background: We aimed to evaluate differences in outcome between patients admitted to intensive care unit (ICU) after elective versus acute surgery in a multinational cohort of very old patients (80 years; VIP). Predictors of mortality, with special emphasis on frailty, were assessed.Methods: In total, 5063 VIPs were induded in this analysis, 922 were admitted after elective surgery or intervention, 4141 acutely, with 402 after acute surgery. Differences were calculated using Mann-Whitney-U test and Wilcoxon test. Univariate and multivariable logistic regression were used to assess associations with mortality.Results: Compared patients admitted after acute surgery, patients admitted after elective surgery suffered less often from frailty as defined as CFS (28% vs 46%; p < 0.001), evidenced lower SOFA scores (4 +/- 5 vs 7 +/- 7; p < 0.001). Presence of frailty (CFS >4) was associated with significantly increased mortality both in elective surgery patients (7% vs 12%; p = 0.01), in acute surgery (7% vs 12%; p = 0.02).Conclusions: VIPs admitted to ICU after elective surgery evidenced favorable outcome over patients after acute surgery even after correction for relevant confounders. Frailty might be used to guide clinicians in risk stratification in both patients admitted after elective and acute surgery.
|
|
2. |
- Amerstorfer, Eva Elisa, et al.
(författare)
-
What do pediatric surgeons think about sexual issues in dealing with patients with anorectal malformations? The ARM-Net consortium members’ opinion
- 2019
-
Ingår i: Pediatric Surgery International. - : Springer Science and Business Media LLC. - 0179-0358 .- 1437-9813. ; 35:9, s. 935-943
-
Tidskriftsartikel (refereegranskat)abstract
- Purpose: Since pediatric surgeons aim to follow their patients with anorectal malformations (ARM) into adulthood the aim of this study was to investigate how pediatric surgeons deal with sexual issues related to ARM. Methods: In 2018, a questionnaire was developed by the working group “Follow-up and sexuality” of the ARM-Net consortium and sent to all consortium-linked pediatric surgeons from 31 European pediatric surgical centers. Obtained data were statistically analyzed. Results: Twenty-eight of 37 pediatric surgeons (18 males/10 females) answered the questionnaire. The majority of pediatric surgeons (82%) think they should talk about sexual issues with their patient. More than 50% of pediatric surgeons do not feel at all or only moderately confident discussing the topic of sexuality. Most pediatric surgeons require more support (96%) and wish to be trained in sexuality and sexual issues (78%) to feel confident towards their ARM-patients/parents. For optimal care, sexual issues with ARM-patients should be managed by a multidisciplinary team. Conclusions: Pediatric surgeons feel that sexuality is an important issue for their ARM-patients, which they are primarily responsible of but should be managed in concert with a multidisciplinary team. A training in sexuality is wished to feel more confident about this specific issue.
|
|
3. |
- Backes, Claudia, et al.
(författare)
-
Production and processing of graphene and related materials
- 2020
-
Ingår i: 2D Materials. - : IOP Publishing. - 2053-1583. ; 7:2
-
Tidskriftsartikel (refereegranskat)abstract
- We present an overview of the main techniques for production and processing of graphene and related materials (GRMs), as well as the key characterization procedures. We adopt a 'hands-on' approach, providing practical details and procedures as derived from literature as well as from the authors' experience, in order to enable the reader to reproduce the results. Section I is devoted to 'bottom up' approaches, whereby individual constituents are pieced together into more complex structures. We consider graphene nanoribbons (GNRs) produced either by solution processing or by on-surface synthesis in ultra high vacuum (UHV), as well carbon nanomembranes (CNM). Production of a variety of GNRs with tailored band gaps and edge shapes is now possible. CNMs can be tuned in terms of porosity, crystallinity and electronic behaviour. Section II covers 'top down' techniques. These rely on breaking down of a layered precursor, in the graphene case usually natural crystals like graphite or artificially synthesized materials, such as highly oriented pyrolythic graphite, monolayers or few layers (FL) flakes. The main focus of this section is on various exfoliation techniques in a liquid media, either intercalation or liquid phase exfoliation (LPE). The choice of precursor, exfoliation method, medium as well as the control of parameters such as time or temperature are crucial. A definite choice of parameters and conditions yields a particular material with specific properties that makes it more suitable for a targeted application. We cover protocols for the graphitic precursors to graphene oxide (GO). This is an important material for a range of applications in biomedicine, energy storage, nanocomposites, etc. Hummers' and modified Hummers' methods are used to make GO that subsequently can be reduced to obtain reduced graphene oxide (RGO) with a variety of strategies. GO flakes are also employed to prepare three-dimensional (3d) low density structures, such as sponges, foams, hydro- or aerogels. The assembly of flakes into 3d structures can provide improved mechanical properties. Aerogels with a highly open structure, with interconnected hierarchical pores, can enhance the accessibility to the whole surface area, as relevant for a number of applications, such as energy storage. The main recipes to yield graphite intercalation compounds (GICs) are also discussed. GICs are suitable precursors for covalent functionalization of graphene, but can also be used for the synthesis of uncharged graphene in solution. Degradation of the molecules intercalated in GICs can be triggered by high temperature treatment or microwave irradiation, creating a gas pressure surge in graphite and exfoliation. Electrochemical exfoliation by applying a voltage in an electrolyte to a graphite electrode can be tuned by varying precursors, electrolytes and potential. Graphite electrodes can be either negatively or positively intercalated to obtain GICs that are subsequently exfoliated. We also discuss the materials that can be amenable to exfoliation, by employing a theoretical data-mining approach. The exfoliation of LMs usually results in a heterogeneous dispersion of flakes with different lateral size and thickness. This is a critical bottleneck for applications, and hinders the full exploitation of GRMs produced by solution processing. The establishment of procedures to control the morphological properties of exfoliated GRMs, which also need to be industrially scalable, is one of the key needs. Section III deals with the processing of flakes. (Ultra)centrifugation techniques have thus far been the most investigated to sort GRMs following ultrasonication, shear mixing, ball milling, microfluidization, and wet-jet milling. It allows sorting by size and thickness. Inks formulated from GRM dispersions can be printed using a number of processes, from inkjet to screen printing. Each technique has specific rheological requirements, as well as geometrical constraints. The solvent choice is critical, not only for the GRM stability, but also in terms of optimizing printing on different substrates, such as glass, Si, plastic, paper, etc, all with different surface energies. Chemical modifications of such substrates is also a key step. Sections IV-VII are devoted to the growth of GRMs on various substrates and their processing after growth to place them on the surface of choice for specific applications. The substrate for graphene growth is a key determinant of the nature and quality of the resultant film. The lattice mismatch between graphene and substrate influences the resulting crystallinity. Growth on insulators, such as SiO2, typically results in films with small crystallites, whereas growth on the close-packed surfaces of metals yields highly crystalline films. Section IV outlines the growth of graphene on SiC substrates. This satisfies the requirements for electronic applications, with well-defined graphene-substrate interface, low trapped impurities and no need for transfer. It also allows graphene structures and devices to be measured directly on the growth substrate. The flatness of the substrate results in graphene with minimal strain and ripples on large areas, allowing spectroscopies and surface science to be performed. We also discuss the surface engineering by intercalation of the resulting graphene, its integration with Si-wafers and the production of nanostructures with the desired shape, with no need for patterning. Section V deals with chemical vapour deposition (CVD) onto various transition metals and on insulators. Growth on Ni results in graphitized polycrystalline films. While the thickness of these films can be optimized by controlling the deposition parameters, such as the type of hydrocarbon precursor and temperature, it is difficult to attain single layer graphene (SLG) across large areas, owing to the simultaneous nucleation/growth and solution/precipitation mechanisms. The differing characteristics of polycrystalline Ni films facilitate the growth of graphitic layers at different rates, resulting in regions with differing numbers of graphitic layers. High-quality films can be grown on Cu. Cu is available in a variety of shapes and forms, such as foils, bulks, foams, thin films on other materials and powders, making it attractive for industrial production of large area graphene films. The push to use CVD graphene in applications has also triggered a research line for the direct growth on insulators. The quality of the resulting films is lower than possible to date on metals, but enough, in terms of transmittance and resistivity, for many applications as described in section V. Transfer technologies are the focus of section VI. CVD synthesis of graphene on metals and bottom up molecular approaches require SLG to be transferred to the final target substrates. To have technological impact, the advances in production of high-quality large-area CVD graphene must be commensurate with those on transfer and placement on the final substrates. This is a prerequisite for most applications, such as touch panels, anticorrosion coatings, transparent electrodes and gas sensors etc. New strategies have improved the transferred graphene quality, making CVD graphene a feasible option for CMOS foundries. Methods based on complete etching of the metal substrate in suitable etchants, typically iron chloride, ammonium persulfate, or hydrogen chloride although reliable, are time- and resource-consuming, with damage to graphene and production of metal and etchant residues. Electrochemical delamination in a low-concentration aqueous solution is an alternative. In this case metallic substrates can be reused. Dry transfer is less detrimental for the SLG quality, enabling a deterministic transfer. There is a large range of layered materials (LMs) beyond graphite. Only few of them have been already exfoliated and fully characterized. Section VII deals with the growth of some of these materials. Amongst them, h-BN, transition metal tri- and di-chalcogenides are of paramount importance. The growth of h-BN is at present considered essential for the development of graphene in (opto) electronic applications, as h-BN is ideal as capping layer or substrate. The interesting optical and electronic properties of TMDs also require the development of scalable methods for their production. Large scale growth using chemical/physical vapour deposition or thermal assisted conversion has been thus far limited to a small set, such as h-BN or some TMDs. Heterostructures could also be directly grown. Section VIII discusses advances in GRM functionalization. A broad range of organic molecules can be anchored to the sp(2) basal plane by reductive functionalization. Negatively charged graphene can be prepared in liquid phase (e.g. via intercalation chemistry or electrochemically) and can react with electrophiles. This can be achieved both in dispersion or on substrate. The functional groups of GO can be further derivatized. Graphene can also be noncovalently functionalized, in particular with polycyclic aromatic hydrocarbons that assemble on the sp(2) carbon network by pi-pi stacking. In the liquid phase, this can enhance the colloidal stability of SLG/FLG. Approaches to achieve noncovalent on-substrate functionalization are also discussed, which can chemically dope graphene. Research efforts to derivatize CNMs are also summarized, as well as novel routes to selectively address defect sites. In dispersion, edges are the most dominant defects and can be covalently modified. This enhances colloidal stability without modifying the graphene basal plane. Basal plane point defects can also be modified, passivated and healed in ultra-high vacuum. The decoration of graphene with metal nanoparticles (NPs) has also received considerable attention, as it allows to exploit synergistic effects between NPs and graphene. Decoration can be either achieved chemically or in the gas phase. All LMs,
|
|
4. |
- Hageman, Isabel C., et al.
(författare)
-
A Quality Assessment of the ARM-Net Registry Design and Data Collection
- 2023
-
Ingår i: Journal of Pediatric Surgery. - : Elsevier BV. - 0022-3468. ; 58:10, s. 1921-1928
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Registries are important in rare disease research. The Anorectal Malformation Network (ARM-Net) registry is a well-established European patient registry collecting demographic, clinical, and functional outcome data. We assessed the quality of this registry through review of the structure, data elements, collected data, and user experience. Material and methods: Design and data elements were assessed for completeness, consistency, usefulness, accuracy, validity, and comparability. An intra- and inter-user variability study was conducted through monitoring and re-registration of patients. User experience was assessed via a questionnaire on registration, design of registry, and satisfaction. Results: We evaluated 119 data elements, of which 107 were utilized and comprised 42 string and 65 numeric elements. A minority (37.0%) of the 2278 included records had complete data, though this improved to 83.5% when follow-up elements were excluded. Intra-observer variability demonstrated 11.7% incongruence, while inter-observer variability was 14.7%. Users were predominantly pediatric surgeons and typically registered patients within 11–30 min. Users did not experience any significant difficulties with data entry and were generally satisfied with the registry, but preferred more longitudinal data and patient-reported outcomes. Conclusions: The ARM-Net registry presents one of the largest ARM cohorts. Although its collected data are valuable, they are susceptible to error and user variability. Continuous evaluations are required to maintain relevant and high-quality data and to achieve long-term sustainability. With the recommendations resulting from this study, we call for rare disease patient registries to take example and aim to continuously improve their data quality to enhance the small, but impactful, field of rare disease research. Level of Evidence: V.
|
|
5. |
- Morandi, Anna, et al.
(författare)
-
Urological Impact of Epididymo-orchitis in Patients with Anorectal Malformation : An ARM-Net Consortium Study
- 2022
-
Ingår i: European Journal of Pediatric Surgery. - : Georg Thieme Verlag KG. - 0939-7248 .- 1439-359X. ; 32:6, s. 504-511
-
Tidskriftsartikel (refereegranskat)abstract
- Introduction To investigate the current experience of the ARM-Net Consortium in the management of epididymo-orchitis (EO) in patients with anorectal malformations (ARMs), and to identify specific risk factors and the need for urological care involvement. Materials and Methods We retrospectively collected data of EO in patients with ARM between 2015 and 2019. Data on urological aspects, ARM type, surgical approach, associated anomalies, diagnosis, and treatment of EO were collected and analyzed. Results Twenty-nine patients were reported by 12 centers. Twenty-six patients with EO (90%) had ARM with a rectourinary fistula. Median age at first EO was 2 years (range: 15 days-27 years). Twenty patients (69%) experienced multiple EO, and 60% of recurrences were ipsilateral. Associated urological anomalies included vesicoureteral reflux (48%), urethral anomalies (41%), neurogenic bladder (41%), and ectopic vas (10%). A positive urine culture during EO was present in 69%. EO was treated with antibiotics (90%), limiting surgical exploration to 14%. Prevention of recurrences included surgery (bulking agents 15%, vasectomy 15%, and orchiectomy 5%) and antibiotic prophylaxis (20%). Conclusion Urologists may encounter patients with EO in ARM patients, frequently with positive urine culture. An appropriate urologic work-up for most ARM patients is necessary to identify and treat underlying risk factors. A practical scheme for the work-up is suggested for a close collaboration between pediatric surgeons and urologists.
|
|
6. |
- Samuk, Inbal, et al.
(författare)
-
Anorectal malformations and perineal hemangiomas : The Arm-Net Consortium experience
- 2019
-
Ingår i: Journal of Pediatric Surgery. - : Elsevier BV. - 0022-3468. ; 54:10, s. 1993-1997
-
Tidskriftsartikel (refereegranskat)abstract
- Aim: Perineal hemangiomas rarely occur in patients with anorectal malformations (ARMs), but they can pose a significant challenge and warrant special attention. Surgical incision of posterior sagittal anorectoplasty (PSARP) may involve the hemangioma site resulting in hemorrhage, damage to blood supply, leading to complications and adversely affecting outcome. The aim of this study was to review the experience of the ARM-Net Consortium in the management of perineal hemangioma associated with ARM and evaluate treatment strategies. Materials and methods: Data on all patients with ARM and a perineal hemangioma located in the planes of the PSARP dissection who were managed at participating ARM-Net centers were collected retrospectively by questionnaire, as follows: ARM type, hemangioma distribution and penetration, imaging findings, medical/surgical management, timing of definitive repair, complications and outcome. Results: Ten patients from eight centers were included. Three patients each had a rectobulbar or rectovestibular fistula, 2 had a rectoperineal fistula, and one had a rectoprostatic fistula; in one patient, the hemangioma was too disfiguring to determine malformation type. Mean follow-up time was 36.6 months (median 29 months). Colostomies were performed before definitive repair in 8 patients. Five patients received systemic beta-blockers before PSARP: 3 were operated uneventfully following partial/complete involution of the hemangioma, and 2 are awaiting surgery. The two patients with rectoperineal fistula were managed expectantly. The remaining 3 patients underwent surgery with no preoperative medical treatment, and all had complications: mislocated neoanus in three and complete perineal dehiscence in one. Conclusion: Attempting PSARP in the presence of a perineal hemangioma may lead to complications and adversely affect outcome. This study confirms the benefits of beta blocker treatment before surgical reconstruction. Level of evidence: Treatment study, level III.
|
|
7. |
- Samuk, Inbal, et al.
(författare)
-
Perineal Groove : An Anorectal Malformation Network, Consortium Study
- 2020
-
Ingår i: Journal of Pediatrics. - : Elsevier BV. - 0022-3476. ; 222, s. 207-212
-
Tidskriftsartikel (refereegranskat)abstract
- Objective: To review the Anorectal Malformation Network experience with perineal groove (PG) focusing on its clinical characteristics and management. Study design: Data on patients with PG managed at 10 participating Anorectal Malformation Network centers in 1999-2019 were collected retrospectively by questionnaire. Results: The cohort included 66 patients (65 females) of median age 1.4 months at diagnosis. The leading referral diagnosis was anal fissure (n = 20 [30.3%]): 23 patients (34.8%) had anorectal malformations. Expectant management was practiced in 47 patients (71.2%). Eight (17%) were eventually operated for local complications. The median time to surgery was 14 months (range, 3.0-48.6 months), and the median age at surgery was 18.3 months (range, 4.8-58.0 months). In the 35 patients available for follow-up of the remaining 39 managed expectantly, 23 (65.7%) showed complete or near-complete self-epithelization by a mean age 15.3 months (range, 1-72 months) and 4 (11.4%) showed partial self-epithelization by a mean age 21 months (range, 3-48 months). Eight patients showed no resolution (5 were followed for ≤3 months). Nineteen patients (28.7%) were primarily treated with surgery. In total, 27 patients were operated. Dehiscence occurred in 3 of 27 operated patients (11.1%). Conclusions: PG seems to be an underestimated anomaly, frequently associated with anorectal malformations. Most cases heal spontaneously; therefore, expectant management is recommended. When associated with anorectal malformations requiring reconstruction, PG should be excised in conjunction with the anorectoplasty.
|
|
8. |
- Shinar, David, et al.
(författare)
-
Final report of Working Group 2: Traffic psychology. A COST Action TU1101 / HOPE collaboration
- 2015
-
Rapport (övrigt vetenskapligt/konstnärligt)abstract
- 1. Background The workgroup of Traffic Psychology is concerned with the social, behavioral, and perceptual aspects that are associated with use and non-use of bicycle helmets, in their various forms and under various cycling conditions. 2. Objectives The objectives of WG2 are to (1) share current knowledge among the people already working in the field, (2) suggest new ideas for research on and evaluation of the design of bicycle helmets, and (3) discuss options for funding of such research within the individual frameworks of the participants. 3. Areas for research include: 3.1. The patterns of use of helmets among different users: children, adults, and sports enthusiasts. 3.2. The use of helmets in different environments: rural roads, urban streets, and bike trails. 3.3. Concerns bicyclists have relative to their safety and convenience and the perceived impact of using helmets on comfort and convenience. 3.4. The benefit of helmets for enhancing visibility, and how variations in helmet design and colors affect daytime, nighttime, and dusktime visibility. 3.5. The role of helmets in the acceptance of city-wide pickup-and-drop-off bicycles. 3.6. The impact of helmets on visual search behaviour of bicyclists. 4. Activities The main activities of the WG2 members consisted of: 4.1. Sharing ideas at periodic meetings and in short-term scientific meetings (STSM). 4.2. Formulating a major cooperative study to be jointly conducted in the different environments/cultures/countries. 4.3. Developing research proposals to be submitted to funding organizations – in government and industry. 4.4. Promoting research in this area among graduate students and young Ph.D.’s and cooperating with other researchers in other institutions. 5. Outputs and products: The bulk of this report will consist of short summaries of the outputs listed below of activities conducted and products generated by the WG2 members in the course of the four years of the COST Action TU1101. The outputs are divided into the three categories listed below. 5.1. Multi-country survey of bicycle use, and attitude, and crash experience by adult bicyclists in 17 countries. 5.2. Short-term scientific meetings (STSMs). 5.3. Presentations, technical reports and scientific papers published by the WG members on cycling with particular reference to cycling safety and bicycle helmets. 5.4. Potential applications and implementation of WG2 members’ research.
|
|
9. |
- Shinar, David, et al.
(författare)
-
Reporting bicycle accidents to police in the COST TU1101 survey data base: Cross-country comparisons and associated factors
- 2016
-
Ingår i: ; , s. 9-9
-
Konferensbidrag (refereegranskat)abstract
- Police crash reports are often the main source for official data in many countries. However, police sampling and data are known to be subject to bias, making the countermeasures adopted according to them possibly inefficient. In the case of bicycle crashes, this bias is most acute and it probably varies across countries, with some of them being more prone to reporting accidents to police than others. Assessing if this bias occurs and the size of it can be of great importance for evaluating the risks associated with bicycling. The following paper utilizes data collected in the COST TU1101 action. The data came from an online survey that included questions related with bicyclists' attitudes, accidents, and pattern of use of helmets. An average of only 10% of all crashes were reported to the police (minimum of 0.0% Israel and 3.37% Greece to a maximum of a 30% of Germany). Some factors associated with the reporting level were: type of crash, type of vehicle and injury severity. Finally, no relation was found between the likelihood of reporting and the cyclist's gender, age, use of helmet, and type of bicycle. The significant under-reporting justifies the use of survey data for assessment of bicycling crash patterns as they relate to crash risk issues such as location, cyclists' characteristics, and use of helmet and strategic approaches to bicycle crash prevention and injury reduction, which are discussed in the paper.
|
|
10. |
- Shinar, David, et al.
(författare)
-
Under-reporting bicycle accidents to police in the COST TU1101 international survey: Cross-country comparisons and associated factors
- 2018
-
Ingår i: Accident Analysis and Prevention. - : Elsevier BV. - 0001-4575. ; 110, s. 177-186
-
Tidskriftsartikel (refereegranskat)abstract
- Police crash reports are often the main source for official data in many countries. However, with the exception of fatal crashes, crashes are often underreported in a biased manner. Consequently, the countermeasures adopted according to them may be inefficient. In the case of bicycle crashes, this bias is most acute and it probably varies across countries, with some of them being more prone to reporting accidents to police than others. Assessing if this bias occurs and the size of it can be of great importance for evaluating the risks associated with bicycling.This study utilized data collected in the COST TU1101 action “Towards safer bicycling through optimization of bicycle helmets and usage”. The data came from an online survey that included questions related to bicyclists' attitudes, behaviour, cycling habits, accidents, and patterns of use of helmets. The survey was filled by 8655 bicyclists from 30 different countries. After applying various exclusion factors, 7015 questionnaires filled by adult cyclists from 17 countries, each with at least 100 valid responses, remained in our sample.The results showed that across all countries, an average of only 10% of all crashes were reported to the police, with a wide range among countries: from a minimum of 0.0% (Israel) and 2.6% (Croatia) to a maximum of a 35.0% (Germany). Some factors associated with the reporting levels were type of crash, type of vehicle involved, and injury severity. No relation was found between the likelihood of reporting and the cyclist's gender, age, educational level, marital status, being a parent, use of helmet, and type of bicycle.The significant under-reporting – including injury crashes that do not lead to hospitalization – justifies the use of self-report survey data for assessment of bicycling crash patterns as they relate to (1) crash risk issues such as location, infrastructure, cyclists' characteristics, and use of helmet and (2) strategic approaches to bicycle crash prevention and injury reduction.
|
|