| 1. |
- Méhes, Gábor, et al.
(författare)
-
Solar Heat-Enhanced Energy Conversion in Devices Based on Photosynthetic Membranes and PEDOT:PSS-Nanocellulose Electrodes
- 2020
-
Ingår i: Advanced Sustainable Systems. - : Wiley-VCH Verlag. - 2366-7486. ; 4:1
-
Tidskriftsartikel (refereegranskat)abstract
- Energy harvesting from photosynthetic membranes, proteins, or bacteria through bio-photovoltaic or bio-electrochemical approaches has been proposed as a new route to clean energy. A major shortcoming of these and solar cell technologies is the underutilization of solar irradiation wavelengths in the IR region, especially those in the far IR region. Here, a biohybrid energy-harvesting device is demonstrated that exploits IR radiation, via convection and thermoelectric effects, to improve the resulting energy conversion performance. A composite of nanocellulose and the conducting polymer system poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) is used as the anode in biohybrid cells that includes thylakoid membranes (TMs) and redox mediators (RMs) in solution. By irradiating the conducting polymer electrode by an IR light-emitting diode, a sixfold enhancement in the harvested bio-photovoltaic power is achieved, without compromising stability of operation. Investigation of the output currents reveals that IR irradiation generates convective heat transfer in the electrolyte bulk, which enhances the redox reactions of RMs at the anode by suppressing diffusion limitations. In addition, a fast-transient thermoelectric component, originating from the PEDOT:PSS-nanocellulose-electrolyte interphase, further increases the bio-photocurrent. These results pave the way for the development of energy-harvesting biohybrids that make use of heat, via IR absorption, to enhance energy conversion efficiency.
|
|
| 2. |
- Brooke, Robert, 1989-, et al.
(författare)
-
Paper Electronics Utilizing Screen Printing and Vapor Phase Polymerization
- 2023
-
Ingår i: Advanced Sustainable Systems. - : John Wiley and Sons Inc. - 2366-7486. ; 7:7
-
Tidskriftsartikel (refereegranskat)abstract
- The rise of paper electronics has been accelerated due to the public push for sustainability. Electronic waste can potentially be avoided if certain materials in electronic components can be substituted for greener alternatives such as paper. Within this report, it is demonstrated that conductive polymers poly(3,4-ethylenedoxythiophene) (PEDOT), polypyrrole, and polythiophene, can be synthesized by screen printing combined with vapor phase polymerization on paper substrates and further incorporated into functional electronic components. High patterning resolution (100 µm) is achieved for all conductive polymers, with PEDOT showing impressive sheet resistance values. PEDOT is incorporated as conductive circuitry and as the active material in all-printed electrochromic displays. The conductive polymer circuits allow for functional light emitting diodes, while the electrochromic displays are comparable to commercial displays utilizing PEDOT on plastic substrates.
|
|
| 3. |
- Kostić, Milos, et al.
(författare)
-
Design and Development of OECT Logic Circuits for Electrical Stimulation Applications
- 2022
-
Ingår i: Applied Sciences. - : MDPI. - 2076-3417. ; 12:8
-
Tidskriftsartikel (refereegranskat)abstract
- This paper presents the first successful implementation of fully printed electronics for flexible and wearable smart multi-pad stimulation electrodes intended for use in medical, sports and lifestyle applications. The smart multi-pad electrodes with the electronic circuits based on organic electrochemical transistor (OECT)-based electronic circuits comprising the 3–8 decoder for active pad selection and high current throughput transistors for switching were produced by multi-layer screen printing. Devices with different architectures of switching transistors were tested in relevant conditions for electrical stimulation applications. An automated testbed with a configurable stimulation source and an adjustable human model equivalent circuit was developed for this purpose. Three of the proposed architectures successfully routed electrical currents of up to 15 mA at an output voltage of 30 V, while one was reliably performing even at 40 V. The presented results demonstrate feasibility of the concept in a range of conditions relevant to several applications of electrical stimulation. © 2022 by the authors
|
|
