| 1. |
- Aftab, Umair, et al.
(författare)
-
Two step synthesis of TiO2–Co3O4 composite for efficient oxygen evolution reaction
- 2021
-
Ingår i: International journal of hydrogen energy. - : Elsevier. - 0360-3199 .- 1879-3487. ; 46:13, s. 9110-9122
-
Tidskriftsartikel (refereegranskat)abstract
- For an active hydrogen gas generation through water dissociation, the sluggish oxygen evolution reaction (OER) kinetics due to large overpotential is a main hindrance. Herein, a simple approach is used to produce composite material based on TiO2/Co3O4 for efficient OER and overpotential is linearly reduced with increasing amount of TiO2. The scanning electron microscopy (SEM) and high resolution transmission electron microscopy (HRTEM) investigations reveal the wire like morphology of composite materials, formed by the self-assembly of nanoparticles. The titania nanoparticles were homogenously distributed on the larger Co3O4 nanoparticles. The powder x-ray diffraction revealed a tetragonal phase of TiO2 and the cubic phase of Co3O4 in the composite materials. Composite samples with increasing TiO2 content were obtained (18%, 33%, 41% and 65% wt.). Among the composites, cobalt oxide-titanium oxide with the highest TiO2 content (CT-20) possesses the lowest overpotential for OER with a Tafel slope of 60 mV dec−1 and an exchange current density of 2.98 × 10−3A/cm2. The CT-20 is highly durable for 45 h at different current densities of 10, 20 and 30 mA/cm2. Electrochemical impedance spectroscopy (EIS) confirmed the fast charge transport for the CT-20 sample, which potentially accelerated the OER kinetics. These results based on a two-step methodology for the synthesis of TiO2/Co3O4 material can be useful and interesting for various energy storage and energy conversion systems.
|
|
| 2. |
- Ahmed Khand, Aftab, et al.
(författare)
-
Synthesis of Sheet Like Nanostructures of NiO Using Potassium Dichromate as Surface Modifying Agent for the Sensitive and Selective Determination of Amlodipine Besylate (ADB) Drug
- 2021
-
Ingår i: Electroanalysis. - : WILEY-V C H VERLAG GMBH. - 1040-0397 .- 1521-4109. ; 33:5, s. 1121-1128
-
Tidskriftsartikel (refereegranskat)abstract
- The monitoring of hypertension drugs is very critical and important to sustain a healthy life. In this study, we have synthesized nickel oxide (NiO) nanostructures using potassium dichromate as surface modifying agent by hydrothermal method. These NiO nanostructures were found highly active for the oxidation of ADB besylate (ADB). The unit cell structure and morphology were investigated by scanning electron microscopy (SEM) and powder X-ray diffraction (XRD) techniques. The SEM study has confirmed the nano sheet like morphology and XRD analysis has described the cubic unit arrays of NiO. After the physical characterization, NiO nanostructures were used to modify the surface of glassy carbon electrode (GCE) by drop casting method. Then cyclic voltammetry (CV) was used to characterize the electrochemical activity of NiO nanostructures in the0.1 M phosphate buffer solution of pH 10.0 and a well resolved oxidation peak was identified at 0.70 V. The linear range for the NiO nanostructures was observed from 20-90 nM with a regression coefficient of 0.99 using CV. The calculated limit of detection (LOD) was 2.125 nM and the limit of quantification (LOQ) was 4.08 nM. Further to validate the CV calibration plot, an amperometry experiment was performed on the NiO nanostructures and sensors exhibited a linear range of 10 nM to 115 nM with LOD of 1.15 nM. The proposed approach was successfully used for the determination of ADB from commercial tablets and it reveals that the sensor could be capitalized to monitor ADB concentrations from pharmaceutical products. The use of potassium dichromate as a surface modifying agent for the metal oxide nanostructures may be of great interest to manipulate their crystal and surface properties for the extended range of biomedical and energy related applications.
|
|
| 3. |
- Albaqami, Munirah D., et al.
(författare)
-
The fast nucleation/growth of Co3O4 nanowires on cotton silk : the facile development of a potentiometric uric acid biosensor
- 2022
-
Ingår i: RSC Advances. - : Royal Society of Chemistry. - 2046-2069. ; 12:29, s. 18321-18332
-
Tidskriftsartikel (refereegranskat)abstract
- In this study, we have used cotton silk as a source of abundant hydroxyl groups for the fast nucleation/growth of cobalt oxide (Co3O4) nanowires via a hydrothermal method. The crystal planes of the Co3O4 nanowires well matched the cubic phase. The as-synthesized Co3O4 nanowires mainly contained cobalt and oxygen elements and were found to be highly sensitive towards uric acid in 0.01 M phosphate buffer solution at pH 7.4. Importantly, the Co3O4 nanowires exhibited a large surface area, which was heavily utilized during the immobilization of the enzyme uricase via a physical adsorption method. The potentiometric response of the uricase-immobilizing Co3O4 nanowires was measured in the presence of uric acid (UA) against a silver/silver chloride (Ag/AgCl) reference electrode. The newly fabricated uric acid biosensor possessed a low limit of detection of 1.0 +/- 0.2 nM with a wide linear range of 5 nM to 10 mM and sensitivity of 30.6 mV dec(-1). Additionally, several related parameters of the developed uric acid biosensor were investigated, such as the repeatability, reproducibility, storage stability, selectivity, and dynamic response time, and these were found to be satisfactory. The good performance of the Co3O4 nanowires was verified based on the fast charge-transfer kinetics, as confirmed via electrochemical impedance spectroscopy. The successful practical use of the uric acid biosensor was demonstrated based on the recovery method. The observed performance of the uricase-immobilizing Co3O4 nanowires revealed that they could be considered as a promising and alternative tool for the detection of uric acid under both in vitro and in vivo conditions. Also, the use of cotton silk as a source of abundant hydroxyl groups may be considered for the remarkably fast nucleation/growth of other metal-oxide nanostructures, thereby facilitating the fabrication of functional electrochemical devices, such as batteries, water-splitting devices, and supercapacitors.
|
|
| 4. |
- Ali Soomro, Razium, et al.
(författare)
-
Highly sensitive determination of atropine using cobalt oxide nanostructures: Influence of functional groups on the signal sensitivity
- 2016
-
Ingår i: Analytica Chimica Acta. - : ELSEVIER SCIENCE BV. - 0003-2670 .- 1873-4324. ; 948, s. 30-39
-
Tidskriftsartikel (refereegranskat)abstract
- This study describes sensitive determination of atropine using glassy carbon electrodes (GCE) modified with Co3O4 nanostructures. The as-synthesised nanostructures were grown using cysteine (CYS), glutathione (GSH) and histidine (HYS) as effective templates under hydrothermal action. The obtained morphologies revealed interesting structural features, including both cavity-based and flower-shaped structures. The as-synthesised morphologies were noted to actively participate in electro-catalysis of atropine (AT) drug where GSH-assisted structures exhibited the best signal response in terms of current density and over-potential value. The study also discusses the influence of functional groups on the signal sensitivity of atropine electro-oxidation. The functionalisation was carried with the amino acids originally used as effective templates for the growth of Co3O4 nanostructures. The highest increment was obtained when GSH was used as the surface functionalising agent. The GSH-functionalised Co3O4-modified electrode was utilised for the electro-chemical sensing of AT in a concentration range of 0.01 -0.46 mu M. The developed sensor exhibited excellent working linearity (R-2 = 0.999) and signal sensitivity up to 0.001 mu M of AT. The noted high sensitivity of the sensor is associated with the synergy of superb surface architectures and favourable interaction facilitating the electron transfer kinetics for the electro-catalytic oxidation of AT. Significantly, the developed sensor demonstrated excellent working capability when used for AT detection in human urine samples with strong anti-interference potential against common co-existing species, such as glucose, fructose, cysteine, uric acid, dopamine and ascorbic acid. (C) 2016 Elsevier B.V. All rights reserved.
|
|
| 5. |
- Alshgari, Razan A., et al.
(författare)
-
Manipulation of CuO morphology for efficient potentiometric detection of urea via slow nucleation/growth kinetics exerted by mixed solvents
- 2022
-
Ingår i: Journal of materials science. Materials in electronics. - : SPRINGER. - 0957-4522 .- 1573-482X. ; 33, s. 25250-25262
-
Tidskriftsartikel (refereegranskat)abstract
- Controlling the reaction kinetics during the nucleation/growth of cupric oxide (CuO) nanostructures is very critical in order to achieve a specific and well-defined morphology. For this purpose, we have slowed down the reaction speed using a mixed solvent concept and successfully obtained a chain-like morphology of CuO nanostructures using hydrothermal method. The CuO chain-like morphology was synthesized using a 1:1 (v/v) ratio of ethylene glycol and water. The morphology and crystalline features of CuO were studied by scanning electron microscopy (SEM) and powder X-ray diffraction techniques. The high resolution transmission electron microscopy revealed 5 nm crystallite size for the CuO material prepared in the mixed solvents. The obtained results have shown that the prepared CuO chains had a monocline phase, containing only Cu and O as main elements as confirmed by energy dispersive spectroscopy. This unique morphology obtained from mixed solvent process has provided a better surface for the loading of urease enzyme, thus it enabled the development of sensitive and selective urea biosensor in phosphate buffer solution of pH 7.4. The physical adsorption method was used to immobilize urease enzyme onto the nano surface of CuO. The fabricated biosensor based on urease/CuO chains has shown a dynamic linear range from 0.0005 to15 mM with a low limit of detection 0.0001 mM. Additionally, a fast response time aroudn1s, h high selectivity, stability, repeatability, storage time, and reproducibility were observed. The effect of pH and temperature on the potentiometric signal of the developed biosensor was also examined. Importantly, the practical aspects of the fabricated urea biosensor were probed and the obtained percent recovery results revealed an outstanding performance. The strategy of using mixed solvent with equal volume ratio would be useful for the preparation of other metal oxides with improved catalytic properties for a wide range of clinical, biomedical and other related applications.
|
|
| 6. |
- Amin, Sidra, et al.
(författare)
-
MoSx-Co3O4 Nanocomposite for Selective Determination of Ascorbic Acid
- 2021
-
Ingår i: Journal of Nanoscience and Nanotechnology. - : AMER SCIENTIFIC PUBLISHERS. - 1533-4880 .- 1533-4899. ; 21:4, s. 2595-2603
-
Tidskriftsartikel (refereegranskat)abstract
- Designing a nanocomposite with sensitive and selective determination of ascorbic acid is challenging task. It is possible through the exploitation of attractive features of nanoscience and nanotechnology for the synthesis of nanostructured materials. Herein, we report the decoration of nanoparticle of MoSx on the surface of Co3O4 nanowires by hydrothermal method. The MoSx nanoparticles shared the large surface on the Co3O4 nanowires, thus it supported in the development enzyme free ascorbic acid sensor. Non-enzymatic sensor based on MoSx-Co3O4 composite was found very selective for the determination of ascorbic acid (AA) in phosphate buffer solution of pH 7.4. The MoSx-Co3O4 nanocomposite was used to modify the glassy carbon electrode to measure AA from variety of practical samples. The MoSx-Co3O4 nanocomposite was used to modify the glassy carbon electrode and it has shown the attractive analytical features such as a low working potential +0.3 V, linear range of concentration from 100-7000 mu M, low limit of detection 14 mu M, and low limit of quantification (LOQ) of 42 mu M. The developed sensor is highly selective and stable. Importantly, it was applied successfully for the practical applications such as detection of AA from grapefruit, tomato and lemon juice. The excellent electrochemical properties of fabricated MoSx-Co3O4 nanocomposite can be attributed to the increasing electro active surface area of MoSx. The presented nanocomposite is earth abundant, environment friendly and inexpensive and it holds promising features for the selective and sensitive determination of AA from practical applications. The nanocomposite can be capitalized into the wide range of biomedical applications.
|
|
| 7. |
- Arain, Munazza, et al.
(författare)
-
Simpler and highly sensitive enzyme-free sensing of urea via NiO nanostructures modified electrode
- 2016
-
Ingår i: RSC Advances. - : Royal Society of Chemistry. - 2046-2069. ; 6:45, s. 39001-39006
-
Tidskriftsartikel (refereegranskat)abstract
- In this study, NiO nanostructures were synthesized via a hydrothermal process using ascorbic acid as doping agent in the presence of ammonia. As prepared nanostructures were characterized using Scanning Electron Microscopy (SEM), X-Ray Diffraction (XRD), Brunauer-Emmett-Teller (BET) specific surface area analysis, and thermogravimetric analysis (TGA). These analyses showed that these nanostructures are in the form of cotton-like porous material and crystalline in nature. Furthermore, the average size of these NiO crystallites was estimated to be 3.8 nm. These nanostructures were investigated for their potential to be a highly sensitive and selective enzyme-free sensor for detection of urea after immobilizing on a glassy carbon electrode (GCE) using 0.1% Nafion as binder. The response of this as developed amperometric sensor was linear in the range of 100-1100 mu M urea with a R-2 value of 0.990 and limit of detection (LOD) of 10 mu M. The sensor responded negligibly to various interfering species including glucose, uric acid, and ascorbic acid. This sensor was applied successfully for determining urea in real water samples such as mineral water, tap water, and river water with acceptable recovery.
|
|
| 8. |
- Baloach, Qurrat-ul-ain, et al.
(författare)
-
An amperometric sensitive dopamine biosensor based on novel copper oxide nanostructures
- 2017
-
Ingår i: Microsystem Technologies. - : SPRINGER. - 0946-7076 .- 1432-1858. ; 23:5, s. 1229-1235
-
Tidskriftsartikel (refereegranskat)abstract
- It is highly important to explore the influence of counter anions on the morphology in order to have a desired nanostructure with unique properties. Therefore, in this research work the influence of counter anions on the morphology of copper oxide (CuO) nanostructures is presented using copper chloride and copper acetate salts. A significant role of counter anions on the morphology of CuO nanostructures is observed. The hydrothermal method is used to carry out the synthesis of CuO nanomaterial. The prepared CuO nanostructures are characterized by scanning electron microscopy and X-ray diffraction techniques. The prepared CuO nanomaterial exhibits porous nature with thin nanowires and sponge like morphologies. The dopamine sensing application was carried for exploring the electrocatalytic properties of CuO nanostructures. The presented dopamine biosensor exhibited wide linear range for detection of dopamine from 5 to 40 A mu M with sensitivity of 12.8 A mu A mM(-1) cm(-2). The limit of detection and limit of quantification were estimated in order 0.11 and 0.38 A mu M respectively. The developed dopamine biosensor is highly sensitive, selective, stable and reproducible. The common interfering species such as glucose, ascorbic acid and uric acid showed negligible change in the current when same concentration of dopamine and these interfering species was used. The fabricated biosensor could be used for the determination of dopamine from real blood samples.
|
|
| 9. |
- Bhatti, Adeel Liaquat, et al.
(författare)
-
Nanostructured Co3O4 electrocatalyst for OER : The role of organic polyelectrolytes as soft templates
- 2021
-
Ingår i: Electrochimica Acta. - : Elsevier. - 0013-4686 .- 1873-3859. ; 398
-
Tidskriftsartikel (refereegranskat)abstract
- Designing an efficient electrocatalyst for the oxygen evolution reaction (OER) in alkaline media is highly needed but very challenging task. Herein, we used organic polyelectrolytes such as (carboxymethyl cellulose) CMC and polyacrylamide polymers for the growth of Co3O4 nanostructures by aqueous chemical growth method. The morphology and composition studies were performed on scanning electron microscopy (SEM), energy dispersive X-ray (EDX), powder X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and high-resolution transmission electron microscopy (HRTEM) techniques. The structural properties and the surface chemistry of the Co3O4 electrocatalysts were correlated to the OER performance, and the enhancement mechanism with respect to pristine Co3O4 was observed to be specifically related to the polyelectrolyte templating role.Co3O4@CMC composites displayed reduced crystallite size, producing OER overpotential as low as 290 mV at 10 mAcm−2 in 1.0 KOH and Tafel slope of 71 mVdec−1, suggesting fast transfer of intermediates and electrons during water electrolysis. On the other hand, the use of polyacrylamide and its different templating mechanism resulted in similar crystallite size, but preferential exposed faces and larger surface vacancies content, as demonstrated by HR-TEM and XPS, respectively. Consistently, this material displays cutting-edge OER performance, such as overpotential of 260 mV at 10 mAcm−2 and a low Tafel slope of 63 mVdec−1. The proposed strategy for the preparation of Co3O4 nanostructures in the presence of CMC and polyacrylamide is facile, mass production, thus it could equally contributed towards the realization of hydrogen energy. Therefore, these nanostructures of Co3O4 can be regarded as an alternative and promising materials for the different electrochemical applications including fuel cells, metal air batteries, overall water electrolysis and other energy storage devices.
|
|
| 10. |
- Bhatti, Muhammad Ali, et al.
(författare)
-
Enzymes and phytochemicals from neem extract robustly tuned the photocatalytic activity of ZnO for the degradation of malachite green (MG) in aqueous media
- 2021
-
Ingår i: Research on chemical intermediates (Print). - : SPRINGER. - 0922-6168 .- 1568-5675. ; 47:4, s. 1581-1599
-
Tidskriftsartikel (refereegranskat)abstract
- The malachite green (MG) is very difficult to degrade in water; thus, it needs an efficient photocatalyst. In this study, neem extract was used to tune the surface and crystal properties of ZnO nanostructures for the photodegradation of MG. The biosynthesized ZnO samples were prepared by hydrothermal method in the presence of 5, 10 and 15 mL of neem extract. The structural characterization has shown nanoparticle like morphology of ZnO as revealed by scanning electron microscopy (SEM) and hexagonal phase was confirmed by powder X-ray diffraction (XRD) technique. The XRD analysis has shown a shift in the 2 theta towards lower angle for ZnO with increasing amount of neem extract. Also, the crystallite particle size of ZnO was decreased with increasing neem extract. The UV-visible spectroscopy has shown the decrease in the optical band gap of ZnO, and the lowest band gap is possessed by ZnO sample produced with 15 mL of neem extract. The ZnO sample obtained with 15 mL of neem extract has shown approximately 99% degradation efficiency for MG for 70 min in aqueous solution. The superior photocatalytic activity of ZnO sample with 15 mL of neem extract could be attributed from the decrease in charge recombination rate due to the decreased optical band gap and particle size.
|
|
