| 1. |
- Naqvi, Muhammad Raza, 1983-, et al.
(författare)
-
Off-grid electricity generation using mixed biomass compost: : A scenario-based study with sensitivity analysis
- 2017
-
Ingår i: Applied Energy. - : Elsevier. - 0306-2619 .- 1872-9118. ; 201, s. 363-370
-
Tidskriftsartikel (refereegranskat)abstract
- The aim of the study is to investigate the viability of waste gasification based off-grid electricity gener- ation utilizing mixed biomass composts (mixture of rice hulls with cow/poultry manure compost). The economic viability is studied on the different scenarios with considerations of (1) levels of electricity demand and utilization, (2) costs of variable biomass mix, (3) combined domestic and cottage industry business model, and (4) influence of governmental investments. The levelized cost of electricity (LCOE) is used as an indicator to measure the competitiveness of gasification based off-grid electricity genera- tion. The plant loading and the capacity factor have been used to assess the impacts of different scenarios. A sensitivity analysis of key parameters based on variations in annual operational hours, plant efficiency, plant cost and biomass supply cost is conducted. Based on levels of electricity demand and utilization, the LCOE ranged between 40 US cents/kW h and 29 US cents/kW h based on the plant loading and the capac- ity factor. The business revenue would not change considerably despite better plant utilization and reduced levelized cost of electricity if all the consumers, both basic or medium, are charged with the flat tariff. The part load operation will be costly despite considerably low capital investment per kW in com- parison with PV or solar based plants. There is a large potential of off-grid electricity generation but the estimated off-grid electricity price is found to be higher in all scenarios than average grid-based electric- ity tariff. Moreover, the challenges for the implementation of the real off-grid electricity generation plant are discussed.
|
|
| 2. |
- Thomas, HS, et al.
(författare)
-
- 2019
-
swepub:Mat__t
|
|
| 3. |
- Anees, Hafiz Muhammad, et al.
(författare)
-
A mathematical model-based approach for DC multi-microgrid performance evaluations considering intermittent distributed energy resources, energy storage, multiple load classes, and system components variations
- 2021
-
Ingår i: Energy Science & Engineering. - : John Wiley & Sons. - 2050-0505. ; 9, s. 1919-1934
-
Tidskriftsartikel (refereegranskat)abstract
- The efficiency of DC microgrid needs investigation from a smart grid perspective, since their spread has expected to prevail in comparison with AC counterparts. Furthermore, there is a need to address the limitations (majorly to cater the intermittency of distributed energy resources (DERs) as well as the time dependency of systematic parameters etc.) in previous model and propose a new mathematical model to evaluate system efficiency for given parameters and scenarios. The core focus of current study aims at formulation of an improved (composite) mathematical model, that is capable of bridging issues and serve as a tool to address requirements of future DC systems including microgrids (MGs) and multi-microgrids (MMGs). This research work offers such a mathematical model that consists of 3D matrices based on newly derived set of discrete time dependent equations, which evaluates the system efficiency of residential DC-MMGs. Each DC-MG is embedded with intermittent DERs, storage, components (with efficiency variations), and multi-class load (with discrete time dependency), for evaluation across worst, normal, and best scenarios. A comprehensive sensitivity analysis across various cases and respective scenarios are also presented to evaluate overall system performance. Also, the impacts of system parameters on various system variables, states, and overall system efficiency have presented in this paper.
|
|
| 4. |
- Arslan, Muhammad, et al.
(författare)
-
Impact of Varying Load Conditions and Cooling Energy Comparison of a Double-Inlet Pulse Tube Refrigerator
- 2020
-
Ingår i: Processes. - : MDPI. - 2227-9717. ; 8:3
-
Tidskriftsartikel (refereegranskat)abstract
- Modeling and optimization of a double-inlet pulse tube refrigerator (DIPTR) is very difficult due to its geometry and nature. The objective of this paper was to optimize-DIPTR through experiments with the cold heat exchanger (CHX) along the comparison of cooling load with experimental data using different boundary conditions. To predict its performance, a detailed two-dimensional DIPTR model was developed. A double-drop pulse pipe cooler was used for solving continuity, dynamic and power calculations. External conditions for applicable boundaries include sinusoidal pressure from an end of the tube from a user-defined function and constant temperature or limitations of thermal flux within the outer walls of exchanger walls under colder conditions. The results of the system's cooling behavior were reported, along with the connection between the mass flow rates, heat distribution along pulse tube and cold-end pressure, the cooler load's wall temp profile and cooler loads with varied boundary conditions i.e. opening of 20% double-inlet and 40-60% orifice valves, respectively. Different loading conditions of 1 and 5W were applied on the CHX. At 150 K temperature of the cold-end heat exchanger, a maximum load of 3.7 W was achieved. The results also reveal a strong correlation between computational fluid dynamics modeling results and experimental results of the DIPTR.
|
|
| 5. |
- Farooq, Muhammad, et al.
(författare)
-
Thermodynamic Performance Analysis of Hydrofluoroolefins (HFO) Refrigerants in Commercial Air-Conditioning Systems for Sustainable Environment
- 2020
-
Ingår i: Processes. - : MDPI. - 2227-9717. ; 8:2
-
Tidskriftsartikel (refereegranskat)abstract
- Global warming is one of most severe environmental concerns that our planet is facing today. One of its causes is the previous generation of refrigerants that, upon release, remain in the atmosphere for longer periods and contribute towards global warming. This issue could potentially be solved by replacing the previous generation's high global warming potential (GWP) refrigerants with environmentally friendly refrigerants. This scenario requires an analysis of new refrigerants for a comparison of the thermodynamic properties of the previously used refrigerants. In the present research, a numerical study was conducted to analyze the thermodynamic performance of specifically low GWP hydrofluoroolefens (HFO) refrigerants for an actual vapor compression refrigeration cycle (VCRC) with a constant degree of 3 K superheat. The output parameters included the refrigeration effect, compressor work input, the coefficient of performance (COP), and the volumetric refrigeration capacity (VRC), all of which were calculated by varying the condenser pressure from 6 to 12 bars and vapor pressure from 0.7 to 1.9 bars. Results showed that R1234ze(Z) clearly possessed the desired thermodynamic performance. The drop in refrigeration effect for R1234ze(Z) was merely 14.6% less than that of R134a at a 12 bar condenser pressure; this was minimum drop among candidate refrigerants. The drop in the COP was the minimum for R1234ze(Z)-5.1% less than that of R134a at a 9 bar condenser pressure and 4.7% less than that of R134a at a 1.9 bar evaporator pressure, whereas the COP values of the other refrigerants dropped more drastically at higher condenser pressures. R1234ze(Z) possessed favorable thermodynamic characteristics, with a GWP of 7, and it can serve as an alternative refrigerant for refrigeration systems for a sustainable environment.
|
|
| 6. |
- Hameed, Zeeshan, et al.
(författare)
-
A Comprehensive Review on Thermal Coconversion of Biomass, Sludge, Coal, and Their Blends Using Thermogravimetric Analysis
- 2020
-
Ingår i: Journal of Chemistry. - : Hindawi Publishing Corporation. - 2090-9063 .- 2090-9071. ; 2020
-
Forskningsöversikt (refereegranskat)abstract
- Lignocellulosic biomass is a vital resource for providing clean future energy with a sustainable environment. Besides lignocellulosic residues, nonlignocellulosic residues such as sewage sludge from industrial and municipal wastes are gained much attention due to its large quantities and ability to produce cheap and clean energy to potentially replace fossil fuels. These cheap and abundantly resources can reduce global warming owing to their less polluting nature. The low-quality biomass and high ash content of sewage sludge-based thermal conversion processes face several disadvantages towards its commercialization. Therefore, it is necessary to utilize these residues in combination with coal for improvement in energy conversion processes. As per author information, no concrete study is available to discuss the synergy and decomposition mechanism of residues blending. The objective of this study is to present the state-of-the-art review based on the thermal coconversion of biomass/sewage sludge, coal/biomass, and coal/sewage sludge blends through thermogravimetric analysis (TGA) to explore the synergistic effects of the composition, thermal conversion, and blending for bioenergy production. This paper will also contribute to detailing the operating conditions (heating rate, temperature, and residence time) of copyrolysis and cocombustion processes, properties, and chemical composition that may affect these processes and will provide a basis to improve the yield of biofuels from biomass/sewage sludge, coal/sewage sludge, and coal/biomass blends in thermal coconversion through thermogravimetric technique. Furthermore, the influencing factors and the possible decomposition mechanism are elaborated and discussed in detail. This study will provide recent development and future prospects for cothermal conversion of biomass, sewage, coal, and their blends.
|
|
| 7. |
- Hussain, Arif, et al.
(författare)
-
Methoxy-methylheptane as a cleaner fuel additive : An energy- and cost-efficient enhancement for separation and purification units
- 2021
-
Ingår i: Energy Science & Engineering. - : John Wiley & Sons. - 2050-0505. ; :9, s. 1632-1646
-
Tidskriftsartikel (refereegranskat)abstract
- Environmental protection agencies have begun imposing stringent regulations on the existing refineries to control the levels of gasoline additives. In this context, a novel compound, 2-methoxy-2-methylheptane (MMH), had drawn attention as fuel additive for cleaner combustion. The conventional process of MMH production features three distillation columns in a direct sequence. These columns are used to maintain the required product purities and to utilize the unreacted reactants through recycling streams. The distillation system of the existing MMH plant can afford significant energy savings, leading to a reduction in the total annual costs (TAC). The aim of this investigation is to demonstrate that the reported conventional process can be significantly enhanced by modifying the design and operational parameters and by replacing two distillation columns with an intensified dividing wall column (DWC) configuration. The DWC design is further optimized using several algorithms such as the modified coordinate method (MCD), robust particle swarm paradigm (PSP), and firefly (FF) with nonlinear constraints. Compared to conventional process, the optimized DWC resulted in 24% and 11.5% savings in the plant operating and total annual costs, respectively.
|
|
| 8. |
- Jamil, Asif, et al.
(författare)
-
Polyetherimide-Montmorillonite Nano-Hybrid Composite Membranes : CO2 Permeance Study via Theoretical Models
- 2020
-
Ingår i: Processes. - : MDPI. - 2227-9717. ; 8:1
-
Tidskriftsartikel (refereegranskat)abstract
- The incorporation of aminolauric acid modified montmorillonite (f-MMT) in polyetherimide (PEI) has been implemented to develop hollow fibre nano-hybrid composite membranes (NHCMs) with improved gas separation characteristics. The aforementioned characteristics are caused by enhanced f-MMT spatial dispersion and interfacial interactions with PEI matrix. In this study, existing gas permeation models such as, Nielsen, Cussler, Yang-Cussler, Lape-Cussler and Bharadwaj were adopted to estimate the dispersion state of f-MMT and to predict the CO2 permeance in developed NHCMs. It was found out that the average aspect ratio estimated was 53, with 3 numbers of stacks per unit tactoid, which showed that the intercalation f-MMT morphology is the dominating dispersion state of filler in PEI matrix. Moreover, it was observed that Bharadwaj model showed the least average absolute relative error (%AARE) values till 3 wt. % f-MMT loading in the range of +/- 10 for a pressure range of 2 to 10 bar. Hence, Bharadwaj was the best fit model for the experimental data compared to other models, as it considers the platelets orientation.
|
|
| 9. |
- Kazmi, Bilal, et al.
(författare)
-
Thermodynamic and economic assessment of cyano functionalized anion based ionic liquid for CO2 removal from natural gas integrated with, single mixed refrigerant liquefaction process for clean energy
- 2022
-
Ingår i: Energy. - : Pergamon Press. - 0360-5442 .- 1873-6785. ; 239
-
Tidskriftsartikel (refereegranskat)abstract
- The study proposes a novel integrated process in which ionic liquid is utilized to control carbon dioxide (CO2) emissions from the natural gas combined with a single mixed refrigerant-based liquefaction process to assist safe transportation over long distances providing a sustainable and cleaner energy. Commercially amines are utilized for CO2 sequestration, but amines entail energy-intensive regeneration with elevated process costs. The present study offers a solvent screening mechanism based on important parameters such as heat of dissolution, viscosity, selectivity, working capacity, vapor pressure, corrosivity, and toxicity. The selected solvents' performance is computed by sensitivity analysis suggesting imidazolium-based cation 1-hexyl-3-methylimidazolium[Hmim] functionalized with tricyanomethanide(tcm) as anion a potential natural gas sweetening solvent in comparison with commercially used solvent monoethanoloamine(MEA), conventional ILs 1-butyl-3-methylimidazolium hexa-fluorophosphate [Bmim][Pf(6)] and 1-butyl-3-methylimidazolium methyl sulfate [Bmim][MeSO4]. The obtained sweet gas is liquefied using a single mixed refrigerant-based process providing 0.99 mol fraction of liquefied CH4 with less overall specific compression power requirement of 0.41 kW/kg of natural gas. Moreover, an exergy analysis demonstrates that the [Hmim][tcm] based process has lower total exergy destruction of 7.49 x 10(3) kW and is found to utilize less overall specific energy consumption 0.49 kWh/kg of NG in contrast to other studied solvents. Furthermore, a detailed economic analysis establishes [Hmim][tcm]-based CO2 integrated with liquefaction technology offers 50.7%, 74.4%, and 85.8% of total annualized cost (TAC) savings compared with the MEA-amim][Pf(6)]-, and [Bmim][MeSO4], respectively. Hence, [Hmim][tcm] for CO2 removal and integration with liquefaction process will incur unit cost based on the total annualized cost to be $2.2 x 10(4)/kmol of purified NG.
|
|
| 10. |
- Manzoor, Numair, et al.
(författare)
-
RETRACTED: Experimental Study of CO2 Conversion into Methanol by Synthesized Photocatalyst (ZnFe2O4/TiO2) Using Visible Light as an Energy Source
- 2020
-
Ingår i: Catalysts. - : MDPI. - 2073-4344. ; 10:2
-
Tidskriftsartikel (refereegranskat)abstract
- Ozone layer depletion is a serious threat due to the extensive release of greenhouse gases. The emission of carbon dioxide (CO2) from fossil fuel combustion is a major reason for global warming. Energy demands and climate change are coupled with each other. CO2is a major gas contributing to global warming; hence, the conversion of CO2 into useful products such as methanol, formic acid, formaldehyde, etc., under visible light is an attractive topic. Challenges associated with the current research include synthesizing a photocatalyst that is driven by visible light with a narrow band gap range between 2.5 and 3.0 eV, the separation of a mixed end product, and the two to three times faster recombination rate of an electron–hole pair compared with separation over yield. The purpose of the current research is to convert CO2 into useful fuel i.e., methanol; the current study focuses on the photocatalytic reduction of CO2into a useful product. This research is based on the profound analysis of published work, which allows the selection of appropriate methods and material for this research. In this study, zinc ferrite (ZnFe2O4) is synthesized via the modified sol–gel method and coupled with titanium dioxide (TiO2). Thereafter, the catalyst is characterized by Fourier transform infrared (FTIR), FE-SEM, UV–Vis, and XRD characterization techniques. UV–Vis illustrates that the synthesized catalyst has a low band gap and utilizes a major portion of visible light irradiation. The XRD pattern was confirmed by the formation of the desired catalyst. FE-SEM illustrated that the size of the catalyst ranges from 50 to 500 nm and BET analysis determined the surface area, which was 2.213 and 6.453 m2/g for ZnFe2O4 and ZnFe2O4/TiO2, respectively. The continuous gas flow photoreactor was used to study the activity of the synthesized catalyst, while titanium dioxide (TiO2) has been coupled with zinc ferrite (ZnFe2O4) under visible light in order to obtain the maximum yield of methanol as a single product and simultaneously avoid the conversion of CO2 into multiple products. The performance of ZnFe2O4/TiO2was mainly assessed through methanol yield with a variable amount of TiO2 over ZnFe2O4 (1:1, 1:2, 2:1, 1:3, and 3:1). The synthesized catalyst recycling ability has been tested up to five cycles. Finally, we concluded that the optimum conditions for maximum yield were found to be a calcination temperature of ZnFe2O4at 900 °C, and optimum yield was at a 1:1 w/w coupling ratio of ZnFe2O4/TiO2. It was observed that due to the enhancement in the electron–hole pair lifetime, the methanol yield at 141.22 μmol/gcat·h over ZnFe2O4/TiO2was found to be 7% higher than the earlier reported data.
|
|
