| 1. |
- Bernedixen, Jacob
(författare)
-
Automated Bottleneck Analysis of Production Systems : Increasing the applicability of simulation-based multi-objective optimization for bottleneck analysis within industry
- 2018
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Manufacturing companies constantly need to explore new management strategies and new methods to increase the efficiency of their production systems and retain their competitiveness. It is of paramount importance to develop new bottleneck analysis methods that can identify the factors that impede the overall performance of their productionsystems so that the optimal improvement actions can be performed. Many of the bottleneck-related research methods developed in the last two decades are aimed mainly at detecting bottlenecks. Due to their sole reliance on historical data and lackof any predictive capability, they are less useful for evaluating the effect of bottleneck improvements.There is an urgent need for an efficient and accurate method of pinpointing bottlenecks, identifying the correct improvement actions and the order in which these should be carried out, and evaluating their effects on the overall system performance. SCORE (simulation-based constraint removal) is a novel method that uses simulation based multi-objective optimization to analyze bottlenecks. By innovatively formulating bottleneck analysis as a multi-objective optimization problem and using simulation to evaluate the effects of various combinations of improvements, all attainable, maximum throughput levels of the production system can be sought through a single optimization run. Additionally, post-optimality frequency analysis of the Pareto-optimal solutions can generate a rank order of the attributes of the resources required to achieve the target throughput levels. However, in its original compilation, SCORE has a very high computational cost, especially when the simulation model is complex with a large number of decision variables. Some tedious manual setup of the simulation based optimization is also needed, which restricts its applicability within industry, despite its huge potential. Furthermore, the accuracy of SCORE in terms of convergence in optimization theory and correctness of identifying the optimal improvement actions has not been evaluated scientifically.Building on previous SCORE research, the aim of this work is to develop an effective method of automated, accurate bottleneck identification and improvement analysis that can be applied in industry.The contributions of this thesis work include:(1) implementation of a versatile representation in terms of multiple-choice set variables and a corresponding constraint repair strategy into evolutionary multi-objective optimization algorithms;(2) introduction of a novel technique that combines variable screening enabled initializationof population and variable-wise genetic operators to support a more efficient search process;(3) development of an automated setup for SCORE to avoid the tedious manual creation of optimization variables and objectives;(4) the use of ranking distance metrics to quantify and visualize the convergence and accuracy of the bottleneck ranking generated by SCORE.All these contributions have been demonstrated and evaluated through extensive experiments on scalable benchmark simulation models as well as several large-scale simulation models for real-world improvement projects in the automotive industry.The promising results have proved that, when augmented with the techniques proposed in this thesis, the SCORE method can offer real benefits to manufacturing companies by optimizing their production systems.
|
|
| 2. |
- Karlsson, Ingemar, et al.
(författare)
-
Combining augmented reality and simulation-based optimization for decision support in manufacturing
- 2017
-
Ingår i: Proceedings of the 2017 Winter Simulation Conference. - : Institute of Electrical and Electronics Engineers (IEEE). - 9781538634288 - 9781538634295 - 9781538634301 ; , s. 3988-3999
-
Konferensbidrag (refereegranskat)abstract
- Although the idea of using Augmented Reality and simulation within manufacturing is not a new one, the improvement of hardware enhances the emergence of new areas. For manufacturing organizations, simulation is an important tool used to analyze and understand their manufacturing systems; however, simulation models can be complex. Nonetheless, using Augmented Reality to display the simulation results and analysis can increase the understanding of the model and the modeled system. This paper introduces a decision support system, IDSS-AR, which uses simulation and Augmented Reality to show a simulation model in 3D. The decision support system uses Microsoft HoloLens, which is a head-worn hardware for Augmented Reality. A prototype of IDSS-AR has been evaluated with a simulation model depicting a real manufacturing system on which a bottleneck detection method has been applied. The bottleneck information is shown on the simulation model, increasing the possibility of realizing interactions between the bottlenecks.
|
|
| 3. |
- Lidberg, Simon, 1986-, et al.
(författare)
-
Evaluating the impact of changes on a global supply chain using an iterative approach in a proof-of-concept model
- 2018
-
Ingår i: Advances in Manufacturing Technology XXXII. - Amsterdam : IOS Press. - 9781614999010 - 9781614999027 ; , s. 467-472
-
Konferensbidrag (refereegranskat)abstract
- Analyzing networks of supply-chains, where each chain is comprised of several actors with different purposes and performance measures, is a difficult task. There exists a large potential in optimizing supply-chains for many companies and therefore the supply-chain optimization problem is of great interest to study. To be able to optimize the supply-chain on a global scale, fast models are needed to reduce computational time. Previous research has been made into the aggregation of factories, but the technique has not been tested against supply-chain problems. When evaluating the configuration of factories and their inter-transportation on a global scale, new insights can be gained about which parameters are important and how the aggregation fits to a supply-chain problem. The paper presents an interactive proof-of-concept model enabling testing of supply chain concepts by users and decision makers.
|
|
| 4. |
- Lidberg, Simon, 1986-, et al.
(författare)
-
Optimizing real-world factory flows using aggregated discrete event simulation modelling : Creating decision-support through simulation-based optimization and knowledge-extraction
- 2020
-
Ingår i: Flexible Services and Manufacturing Journal. - : Springer. - 1936-6582 .- 1936-6590. ; 32:4, s. 888-912
-
Tidskriftsartikel (refereegranskat)abstract
- Reacting quickly to changing market demands and new variants by improving and adapting industrial systems is an important business advantage. Changes to systems are costly; especially when those systems are already in place. Resources invested should be targeted so that the results of the improvements are maximized. One method allowing this is the combination of discrete event simulation, aggregated models, multi-objective optimization, and data-mining shown in this article. A real-world optimization case study of an industrial problem is conducted resulting in lowering the storage levels, reducing lead time, and lowering batch sizes, showing the potential of optimizing on the factory level. Furthermore, a base for decision-support is presented, generating clusters from the optimization results. These clusters are then used as targets for a decision tree algorithm, creating rules for reaching different solutions for a decision-maker to choose from. Thereby allowing decisions to be driven by data, and not by intuition.
|
|
| 5. |
- Lidberg, Simon, 1986-, et al.
(författare)
-
Using Aggregated Discrete Event Simulation Models and Multi-Objective Optimization to Improve Real-World Factories
- 2018
-
Ingår i: Proceedings of the 2018 Winter Simulation Conference. - : IEEE. - 9781538665725 - 9781538665732 - 9781538665701 - 9781538665718 ; , s. 2015-2024
-
Konferensbidrag (refereegranskat)abstract
- Improving production line performance and identifying bottlenecks using simulation-based optimization has been shown to be an effective approach. Nevertheless, for larger production systems which are consisted of multiple production lines, using simulation-based optimization can be too computationally expensive, due to the complexity of the models. Previous research has shown promising techniques for aggregating production line data into computationally efficient modules, which enables the simulation of higher-level systems, i.e., factories. This paper shows how a real-world factory flow can be optimized by applying the previously mentioned aggregation techniques in combination with multi-objective optimization using an experimental approach. The particular case studied in this paper reveals potential reductions of storage levels by over 30 %, lead time reductions by 67 %, and batch sizes reduced by more than 50 % while maintaining the delivery precision of the industrial system.
|
|
| 6. |
- Amouzgar, Kaveh, 1980-, et al.
(författare)
-
A framework for simulation-based multi-objective optimization and knowledge discovery of machining process
- 2018
-
Ingår i: The International Journal of Advanced Manufacturing Technology. - : Springer Science and Business Media LLC. - 0268-3768 .- 1433-3015. ; 98:9-12, s. 2469-2486
-
Tidskriftsartikel (refereegranskat)abstract
- The current study presents an effective framework for automated multi-objective optimization (MOO) of machining processes by using finite element (FE) simulations. The framework is demonstrated by optimizing a metal cutting process in turning AISI-1045, using an uncoated K10 tungsten carbide tool. The aim of the MOO is to minimize tool-chip interface temperature and tool wear depth, that are extracted from FE simulations, while maximizing the material removal rate. The effect of tool geometry parameters, i.e., clearance angle, rake angle, and cutting edge radius, and process parameters, i.e., cutting speed and feed rate on the objective functions are explored. Strength Pareto Evolutionary Algorithm (SPEA2) is adopted for the study. The framework integrates and connects several modules to completely automate the entire MOO process. The capability of performing the MOO in parallel is also enabled by adopting the framework. Basically, automation and parallel computing, accounts for the practicality of MOO by using FE simulations. The trade-off solutions obtained by MOO are presented. A knowledge discovery study is carried out on the trade-off solutions. The non-dominated solutions are analyzed using a recently proposed data mining technique to gain a deeper understanding of the turning process.
|
|
| 7. |
- Amouzgar, Kaveh, 1980-, et al.
(författare)
-
Metamodel based multi-objective optimization of a turning process by using finite element simulation
-
Annan publikation (övrigt vetenskapligt/konstnärligt)abstract
- This study investigates the advantages and potentials of the metamodelbased multi-objective optimization (MOO) of a turning operation through the application of finite element simulations and evolutionary algorithms to a metal cutting process. The objectives are minimizing the interface temperature and tool wear depth obtained from FE simulations using DEFORM2D software, and maximizing the material removal rate. Tool geometry and process parameters are considered as the input variables. Seven metamodelling methods are employed and evaluated, based on accuracy and suitability. Radial basis functions with a priori bias and Kriging are chosen to model tool–chip interface temperature and tool wear depth, respectively. The non-dominated solutions are found using the strength Pareto evolutionary algorithm SPEA2 and compared with the non-dominated front obtained from pure simulation-based MOO. The metamodel-based MOO method is not only advantageous in terms of reducing the computational time by 70%, but is also able to discover 31 new non-dominated solutions over simulation-based MOO.
|
|
| 8. |
- Amouzgar, Kaveh, 1980-, et al.
(författare)
-
Metamodel based multi-objective optimization of a turning process by using finite element simulation
- 2020
-
Ingår i: Engineering optimization (Print). - : Taylor & Francis Group. - 0305-215X .- 1029-0273. ; 52:7, s. 1261-1278
-
Tidskriftsartikel (refereegranskat)abstract
- This study investigates the advantages and potentials of the metamodelbased multi-objective optimization (MOO) of a turning operation through the application of finite element simulations and evolutionary algorithms to a metal cutting process. The objectives are minimizing the interface temperature and tool wear depth obtained from FE simulations using DEFORM2D software, and maximizing the material removal rate. Tool geometry and process parameters are considered as the input variables. Seven metamodelling methods are employed and evaluated, based on accuracy and suitability. Radial basis functions with a priori bias and Kriging are chosen to model tool–chip interface temperature and tool wear depth, respectively. The non-dominated solutions are found using the strength Pareto evolutionary algorithm SPEA2 and compared with the non-dominated front obtained from pure simulation-based MOO. The metamodel-based MOO method is not only advantageous in terms of reducing the computational time by 70%, but is also able to discover 31 new non-dominated solutions over simulation-based MOO.
|
|
| 9. |
- Amouzgar, Kaveh, 1980-
(författare)
-
Metamodel Based Multi-Objective Optimization with Finite-Element Applications
- 2018
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- As a result of the increase in accessibility of computational resources and the increase of computer power during the last two decades, designers are able to create computer models to simulate the behavior of complex products. To address global competitiveness, companies are forced to optimize the design of their products and production processes. Optimizing the design and production very often need several runs of computationally expensive simulation models. Therefore, integrating metamodels, as an efficient and sufficiently accurate approximate of the simulation model, with optimization algorithms is necessary. Furthermore, in most of engineering problems, more than one objective function has to be optimized, leading to multi-objective optimization(MOO). However, the urge to employ metamodels in MOO, i.e., metamodel based MOO (MB-MOO), is more substantial.Radial basis functions (RBF) is one of the most popular metamodeling methods. In this thesis, a new approach to constructing RBF with the bias to beset a priori by using the normal equation is proposed. The performance of the suggested approach is compared to the classic RBF and four other well-known metamodeling methods, in terms of accuracy, efficiency and, most importantly, suitability for integration with MOO evolutionary algorithms. It has been found that the proposed approach is accurate in most of the test functions, and it was the fastest compared to other methods. Additionally, the new approach is the most suitable method for MB-MOO, when integrated with evolutionary algorithms. The proposed approach is integrated with the strength Pareto evolutionary algorithm (SPEA2) and applied to two real-world engineering problems: MB-MOO of the disk brake system of a heavy truck, and the metal cutting process in a turning operation. Thereafter, the Pareto-optimal fronts are obtained and the results are presented. The MB-MOO in both case studies has been found to be an efficient and effective method. To validate the results of the latter MB-MOO case study, a framework for automated finite element (FE) simulation based MOO (SB-MOO) of machining processes is developed and presented by applying it to the same metal cutting process in a turning operation. It has been proved that the framework is effective in achieving the MOO of machining processes based on actual FE simulations.
|
|
| 10. |
- Amouzgar, Kaveh, 1980-, et al.
(författare)
-
Multi-objective optimisation of tool indexing problem : a mathematical model and a modified genetic algorithm
- 2021
-
Ingår i: International Journal of Production Research. - : Taylor & Francis Group. - 0020-7543 .- 1366-588X. ; 59:12, s. 3572-3590
-
Tidskriftsartikel (refereegranskat)abstract
- Machining process efficiencies can be improved by minimising the non-machining time, thereby resulting in short operation cycles. In automatic-machining centres, this is realised via optimum cutting tool allocation on turret-magazine indices – the “tool-indexing problem”. Extant literature simplifies TIP as a single-objective optimisation problem by considering minimisation of only the tool-indexing time. In contrast, this study aims to address the multi-objective optimisation tool indexing problem (MOOTIP) by identifying changes that must be made to current industrial settings as an additional objective. Furthermore, tool duplicates and lifespan have been considered. In addition, a novel mathematical model is proposed for solving MOOTIP. Given the complexity of the problem, the authors suggest the use of a modified strength Pareto evolutionary algorithm combined with a customised environment-selection mechanism. The proposed approach attained a uniform distribution of solutions to realise the above objectives. Additionally, a customised solution representation was developed along with corresponding genetic operators to ensure the feasibility of solutions obtained. Results obtained in this study demonstrate the realization of not only a significant (70%) reduction in non-machining time but also a set of tradeoff solutions for decision makers to manage their tools more efficiently compared to current practices.
|
|
