| 1. |
- Abdullah Asif, Farazee Mohammad, 1980-
(författare)
-
Resource Conservative Manufacturing : New Generation of Manufacturing
- 2011
-
Licentiatavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The question of resource scarcity and emerging pressure of environmentallegislations have put the manufacturing industry with a new challenge. On theone side, there is a huge population that demands a large quantity ofcommodities, on the other side, these demands have to be met by minimumresources and with permissible pollution that the earth’s ecosystem can handle.In this situation, technologic breakthrough that can offer alternative resourceshas become essential. Unfortunately, breakthroughs do not follow any rule ofthumb and while waiting for a miracle, the manufacturing industry has to findways to conserve resources. Within this research the anatomy of a large body ofknowledge has been performed to find the best available practices for resourceconservation. Critical review of the research revealed that none of the availablesolutions are compatible with the level of resource conservation desired by themanufacturing industry or by society. It has also been discovered that a largegap exists between the solutions perceived by the scientists and theapplicability of those solutions. Through careful evaluation of the state-of-theart,the research presented in this thesis introduced a solution of maximizingresource conservation i.e., material, energy and value added, as used inmanufacturing. The solutions emerged from the novel concept named asResource Conservative Manufacturing, which is built upon the concept ofMultiple Lifecycle of product. Unlike other research work, the researchdocumented in this thesis started with the identification of the problem andfrom which a ‘wish to do’ list was drawn. The seriousness of the problem andpotential of adopting the proposed concept has been justified with concreteinformation. A great number of arguments have been presented to show theexisting gaps in the research and from that, a set of solutions to conserveresources has been proposed. Finally, one of the prime hypotheses concerningclosed loop supply chain has been validated through the system dynamicsmodeling and simulation.
|
|
| 2. |
- Archenti, Andreas, 1973-
(författare)
-
A Computational Framework for Control of Machining System Capability : From Formulation to Implementation
- 2011
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Comprehensive knowledge and information about the static and dynamic behaviour of machine tools, cutting processes and their interaction is essential for machining system design, simulation, control and robust operation in safe conditions. The very complex system of a machine tool, fixture and cutting tools during the machining of a part is almost impossible to model analytically with sufficient accuracy. In combination with increasing demands for precision and efficiency in machining call for new control strategies for machining systems. These strategies need to be based on the identification of the static and dynamic stability under both the operational and off-operational conditions. To achieve this it is necessary to monitor and analyze the real system at the factory floor in full production. Design information and operational data can then be linked together to make a realistic digital model of a given machining system. Information from such a model can then be used as input in machining simulation software to find the root causes of instability. The work presented in this thesis deals with the static and dynamic capability of machining systems. The main focus is on the operational stability of the machining system and structural behaviour of only the machine tool, as well. When the accuracy of a machining system is measured by traditional techniques, effects from neither the static stiffness nor the cutting process are taken into account. This limits the applicability of these techniques for realistic evaluation of a machining system’s accuracy. The research presented in this thesis takes a different approach by introducing the concept of operational dynamic parameters. The concept of operational dynamic parameters entails an interaction between the structural elements of the machining systems and the process parameters. According to this concept, the absolute criterion of damping is used to evaluate the dynamic behaviour of a machining system. In contrast to the traditional theory, this methodology allows to determine the machining system's dynamic stability, in real time under operating conditions. This framework also includes an evaluation of the static deformations of a machine tool. In this context, a novel concept of elastically linked system is introduced to account for the representation of the cutting force trough an elastic link that closes the force loop. In addition to the elastic link which behaves as a static element, a dynamic non-contact link has been introduced. The purpose is to study the non-linear effects introduced by variations of contact conditions in joints due to rotational speed.
|
|
| 3. |
- Berglund, Anders
(författare)
-
Criteria for Machinability Evaluation of Compacted Graphite Iron Materials : Design and Production Planning Perspective on Cylinder Block Manufacturing
- 2011
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The Swedish truck industry is looking for new material solutions to achieve lighter engines with increased strength to meet customer demands and to fulfil the new regulations for more environmentally friendly trucks. This could be achieved by increasing the peak pressure in the cylinders. Consequently, a more efficient combustion is obtained and the exhaust lowered. This, however, exposes the engine to higher loads and material physical properties must therefore be enhanced. One material that could meet these demands is Compacted Graphite Iron (CGI). Its mechanical and physical properties make it ideal as cylinder block material, though there are drawbacks concerning its machinability as compared to other materials that are commonly used for the same purpose. Knowledge about machining of the material and its machinability is consequently inadequate.The main goal of this thesis is to identify and investigate the effect of the major factors and their individual contributions on CGI machining process behaviour. When the relationship between the fundamental features; machinability, material microstructure, and material physical properties, are revealed, the CGI material can be optimized, both regarding the manufacturing process and design requirements. The basic understanding of this is developed mainly through experimental analysis as, e.g., machining experiments and material characterization.The machining model presented in this thesis demonstrates the influence of material and process parameters on CGI machinability. It highlights machinability from both design and production planning perspectives. Another important objective of the thesis is an inverse thermo−mechanical FE model for intermittent machining of CGI. Here, experimental results obtained from a developed simulated milling method are used as input data, both to calibrate and validate the model. With these models, a deeper understanding is obtained regarding the way to achieve a stable process, which is the basis for future optimization procedures. The models can therefore be used as a foundation for the optimization of CGI component manufacturing.
|
|
| 4. |
- Daghini, Lorenzo, 1973-
(författare)
-
Improving Machining System Performance through designed-in Damping : Modelling, Analysis and Design Solutions
- 2012
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- With advances in material technology, allowing, for instance, engines to withstand higher combustion pressure and consequently improving performance, comes challenges to productivity. These materials are, in fact, more difficult to machine with regards to tool wear and especially machine tool stability. Machining vibrations have historically been one of the major limitations to productivity and product quality and the cost of machining vibration for cylinder head manufacturing has been estimated at 0.35 euro per part.The literature review shows that most of the research on cutting stability has been concentrating on the use of the stability limits diagram (SLD), addressing the limitations of this approach. On the other hand, research dedicated to development of machine tool components designed for chatter avoidance has been concentrating solely on one component at the time.This thesis proposes therefore to extend the stability limits of the machining system by enhancing the structure’s damping capability via a unified concept based on the distribution of damping within the machining system exploiting the joints composing the machine tool structure. The design solution proposed is based on the enhancement of damping of joint through the exploitation of viscoelastic polymers’ damping properties consciously designed as High Damping Interfaces (HDI).The tool-turret joint and the turret-lathe joint have been analysed. The computational models for dimensioning the HDI’s within these joints are presented in the thesis and validated by the experiments. The models offer the possibility of consciously design damping in the machining system structure and balance it with regards to the needed stiffness.These models and the experimental results demonstrate that the approach of enhancing joint damping is viable and effective. The unified concept of the full chain of redesigned components enables the generation of the lowest surface roughness over the whole range of tested cutting parameters. The improved machining system is not affected by instability at any of the tested cutting parameters and offers an outstanding surface quality.The major scientific contribution of this thesis is therefore represented by the proposed unified concept for designing damping in a machining system alongside the models for computation and optimisation of the HDIs.From the industrial application point of view, the presented approach allows the end user to select the most suitable parameters in terms of productivity as the enhanced machine tool system becomes less sensitive to stability issues provoked by difficult-to-machine materials or fluctuations of the work material properties that may occur in ordinary production processes.
|
|
| 5. |
- Fu, Qilin, 1986-
(författare)
-
High dynamic stiffness nano-structured composites for vibration control : A Study of applications in joint interfaces and machining systems
- 2015
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Vibration control requires high dynamic stiffness in mechanical structures for a reliable performance under extreme conditions. Dynamic stiffness composes the parameters of stiffness (K) and damping (η) that are usually in a trade-off relationship. This thesis study aims to break the trade-off relationship.After identifying the underlying mechanism of damping in composite materials and joint interfaces, this thesis studies the deposition technique and physical characteristics of nano-structured HDS (high dynamic stiffness) composite thick-layer coatings. The HDS composite were created by enlarging the internal grain boundary surface area through reduced grain size in nano scale (≤ 40 nm). The deposition process utilizes a PECVD (Plasma Enhanced Chemical Vapour Deposition) method combined with the HiPIMS (High Power Impulse Magnetron Sputtering) technology. The HDS composite exhibited significantly higher surface hardness and higher elastic modulus compared to Poly(methyl methacrylate) (PMMA), yet similar damping property. The HDS composites successfully realized vibration control of cutting tools while applied in their clamping interfaces.Compression preload at essential joint interfaces was found to play a major role in stability of cutting processes and a method was provided for characterizing joint interface properties directly on assembled structures. The detailed analysis of a build-up structure showed that the vibrational mode energy is shifted by varying the joint interface’s compression preload. In a build-up structure, the location shift of vibration mode’s strain energy affects the dynamic responses together with the stiffness and damping properties of joint interfaces.The thesis demonstrates that it is possible to achieve high stiffness and high damping simultaneously in materials and structures. Analysis of the vibrational strain energy distribution was found essential for the success of vibration control.
|
|
| 6. |
- Mousavi Takami, Kourosh, 1971-
(författare)
-
Process Control and Simulation of Ferromagnetic Strip in the Power Transformers and Electrical Machines Applications : Electric power systems
- 2009
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- This thesis investigates optimization of the control of electrical and thermal equipment by using FEM and CFD modeling in combination with dynamic simulation models. The thesis focuses on the production of electrical strips and the control system with the aim of reducing losses and improving magnetic properties. Several parameters and factors contribute to core losses. Thickness deviations in strip production, high levels of impurities in the core, orientation, ageing, surface oxidation, overloading, and hot spot temperature are among the reasons for losses in the core. Some of the losses occur during strip cutting and core assembly. This dissertation focuses on the reduction of losses in the cold rolling, annealing and manufacturing stages. The cold rolling process has a direct influence on the accuracy of the strip thickness and magnetic ageing of sheets. Some disturbances such as eccentricity, working rolls gap deviation, shape and edge deflections have to be removed in order to achieve accurate thickness. Thickness measurement makes up an important portion of loss evaluation in electrical equipment. Impurities and dirty strip surfaces in the cold rolling step can increase the carbon content of strips that pass through the annealing furnaces after cold rolling. The slab should be cleaned before reeling and rewinding. As the strip passes through the annealing furnaces, the temperature should be homogenous over the entire strip. According to simulations of furnace and strip temperature computed in the COMSOL environment, homogenous temperatures may be achieved using high electrical power reflectors which are equipped with molybdenum disilicide (MoSi2) electrical heating elements to replace the gas fired burners that are currently used. Modelling of the cold rolling process is conducted in order to find the correlation between control system parameters. A multivariable mathematical model for the rolling process is derived here, which reveals the interactions of the influencing variables. This approach provides numerically efficient algorithms, which are necessary for running in a real-time environment. A control model is applied in the MATLAB environment in order to determine the strip thickness at online-offline state using a robust algorithm. The critical problem in the thickness control loop is analysed, and an adaptive control algorithm is proposed. A number of control methods are investigated to improve the final strip properties. Cold rolled strip thickness deviations, eccentricities and shape defects are compensated for. The simulation results are verified with measurement data and the most significant sources of disturbances are detected. Finally, to solve the hottest spot problem in large scale electric power transformer, a new apparatus, oil spraying, is proposed and analysed.
|
|
| 7. |
- Pervaiz, Salman
(författare)
-
Numerical and Experimental Investigations of the Machinability of Ti6AI4V : Energy Efficiency and Sustainable Cooling/ Lubrication Strategies
- 2015
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Titanium alloys are widely utilized in the aerospace, biomedical,marine, petro-chemical and other demanding industries due to theirdurability, high fatigue resistance and ability to sustain elevateoperating temperature. As titanium alloys are difficult to machine, dueto which machining of these alloys ends up with higher environmentalburden. The industry is now embracing the sustainable philosophy inorder to reduce their carbon footprint. This means that the bestsustainable practices have to be used in machining of titanium alloys aswell as in an effort to reduce the carbon footprint and greenhouse gas(GHG) emissions.In this thesis, a better understanding towards the feasibility of shiftingfrom conventional (dry and flood) cooling techniques to the vegetableoil based minimum quantity cooling lubrication (MQCL) wasestablished. Machining performance of MQCL cooling strategies wasencouraging as in most cases the tool life was found close to floodstrategy or sometimes even better. The study revealed that theinfluence of the MQCL (Internal) application method on overallmachining performance was more evident at higher cutting speeds. Inaddition to the experimental machinability investigations, FiniteElement Modeling (FEM) and Computational Fluid Dynamic (CFD)Modeling was also employed to prediction of energy consumed inmachining and cutting temperature distribution on the cutting tool. Allnumerical results were found in close agreement to the experimentaldata. The contribution of the thesis should be of interest to those whowork in the areas of sustainable machining.
|
|
| 8. |
- Werke, Mats
(författare)
-
Principles for modelling of manufacturing sequences
- 2015
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The manufacturing sequence influence, to a large extent, component properties like fatigue life, shape accuracy and manufacturability. By simulating the manufacturing sequence, using numerical or empirical models, and extracting important accumulated data, like residual stress, hardness and shape, the possibilities of early analysis of a design concept and the associated manufacturing sequence will increase. An established methodology has the potential of reducing physical testing and the time and costs of product design and process planning.This thesis proposes an algorithm to be used for setting up a framework of interconnected process step models. With support from the algorithm, it is possible to extract a virtual simulation sequence from a physical manufacturing sequence. Thereby, you can replicate the aggregated effects of process steps on part key features and manufacturing features. The algorithm will serve as a tool in process planning when establishing virtual manufacturing sequences. The virtual sequences should be used for virtual prediction of component properties, optimization of process parameters and evaluation of the effects of replacing, removing or adding process steps to a manufacturing sequenceThe algorithm is based on stepwise upstream selection of process steps, definition of interconnected models and selection of interconnected datasets using breadth first search. The algorithm completes existing procedures for data mapping and exchange of data between models into an overall approach for establishing virtual manufacturing sequences. Other scientific contributions are methods for modelling of deep rolling and blasting, a model material for validation of rolling and forging simulation and principles for integration of process simulation with CAD/CAM.
|
|
| 9. |
- Werner, Mathias
(författare)
-
Theoretical and experimental studies of a single tooth milling process
- 2012
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The industrial development of metal cutting processes in gear manufacturing aims at continuously increasing productivity, including increased tool reliability. Basically, the parameters that have an influence on the cutting processes should be known and possible to control.Gear manufacturing is highly important for the automotive industry. The prevalent manufacturing method is gear hobbing with hobs consisting of solid Powder Metallurgical High Speed Steel (PM HSS) with Physical Vapor Deposited (PVD) coatings.The hob teeth have to be reconditioned before wear reaches such levels that the gear quality becomes impaired. Such wear often results in a total breakdown of the tool. One crucial reason for this is that hobbing processes for the present often lack reliability; which makes it difficult for the gear manufacturers to predict the tool wear on the hob teeth and decide when the tool should be replaced in order to avoid severe damages. A consequence of catastrophic tool wear is that it leads to an instantaneously changed geometry of the cutting edge, which in turn implies that the machined gears do not comply with the stipulated properties on the machined gear products.A single tooth milling test (STMT) with tools of PM-HSS in a conventional milling machine has been developed in this research project, aiming at characterizing the effect of tool preparation on the type of wear mechanism. The experience and conclusions from these tests may probably be transferred to real PM-HSS hob tooling (HT). The advantages of such a test, compared to a real gear hob test, are primarily the cost reductions and time saving aspects with respect to both the design and the manufacturing of the cutting teethThe research presented in this thesis is based on experimental investigations and theoretical studies of significant parameters, i.e. the surface roughness and edge rounding, contributing to the robust and reliable design of a PM-HSS cutting tool. The research work has in addition to, the development of the milling test method, also comprised development of measuring methods and a simulation model based on the Finite Element Model (FEM).
|
|
| 10. |
- Österlind, Tomas, 1987-
(författare)
-
Estimation of Machining System Dynamic Properties - Measurement and Modelling
- 2017
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Dynamic characteristics of machining systems are analysed for improved understanding of both structural and process properties. The thesis stresses the use of testing methods under operational like conditions as these are more representative of closed loop systems, such as machining systems, as compared to conventional testing methods.The test instrument proposed is a contactless excitation and response system, developed for testing of machine tool spindles under load and with rotating spindle. The instrument uses electromagnetic excitation and displacement sensors for analysis of rotating milling tools subject to load. A graphical tool for displaying and analysing rotor displacement was developed in conjunction with this.A modelling procedure for both off-line and on-line estimation of dynamic properties of mechanical structure and process information is presented. The proposed auto-regressive moving average models enable calculation of operational dynamic parameters and they can be estimated in a recursive manner, thus enabling real-time monitoring. The discrimination between stable and unstable processes, both in turning and milling, was performed by analysing the damping obtained from the operational dynamic parameters.
|
|
