| 1. |
- Arndt, D. S., et al.
(författare)
-
STATE OF THE CLIMATE IN 2017
- 2018
-
Ingår i: Bulletin of The American Meteorological Society - (BAMS). - : American Meteorological Society. - 0003-0007 .- 1520-0477. ; 99:8, s. S1-S310
-
Forskningsöversikt (refereegranskat)
|
|
| 2. |
- Kehoe, Laura, et al.
(författare)
-
Make EU trade with Brazil sustainable
- 2019
-
Ingår i: Science. - : American Association for the Advancement of Science (AAAS). - 0036-8075 .- 1095-9203. ; 364:6438, s. 341-
-
Tidskriftsartikel (övrigt vetenskapligt/konstnärligt)
|
|
| 3. |
- Tim Brix Nerenst, Tim Brix, et al.
(författare)
-
Sequential Design Process for Screening and Optimization of Robust and Reliability Based on Finite Element Analysis and Meta-Modelling
- 2022
-
Ingår i: Journal of Computing and Information Science in Engineering. - : ASME International. - 1530-9827 .- 1944-7078. ; 22:4
-
Tidskriftsartikel (refereegranskat)abstract
- A new medical device can take years to develop from early concept to product launch. Three approaches are often combined to mitigate risks: Failure Modes and Effects Analysis (FMEA), simulation and modeling, and physical test programs. Although widely used, all three approaches are generally time-consuming and have their shortcomings: The risk probabilities in FMEA's are often based on educated guesses, even in later development stages as data on the distribution of performance is not available. Thus, the traditional use of safety factors in structural analysis versus the probabilistic approach to risk management presents an obvious misfit. Therefore, the above three approaches are not ideal for addressing the design engineer's key question; how should the design be changed to improve robustness and failure rates. The present work builds upon the existing Robust and Reliability-Based Design Optimization (R2BDO) and adjusts it to address the key questions above using Finite Element Analysis (FEA). The two main features of the presented framework are screening feasible design concepts early in the embodiment phase and subsequently optimizing the design's probabilistic performance (i.e., reduce failure rates) while using minimal computational resources. A case study in collaboration with a medical design and manufacturing company demonstrates the new framework. The optimization minimizes the failure rate (and improves design robustness) concerning three constraint functions (torque, strain, and contact pressure). Furthermore, the study finds that the new framework significantly improves the design's performance function (failure rate) with limited computational resources.
|
|
| 4. |
- Jones, Robert P., et al.
(författare)
-
Patterns of Recurrence After Resection of Pancreatic Ductal Adenocarcinoma : A Secondary Analysis of the ESPAC-4 Randomized Adjuvant Chemotherapy Trial
- 2019
-
Ingår i: JAMA Surgery. - : AMER MEDICAL ASSOC. - 2168-6254 .- 2168-6262. ; 154:11, s. 1038-1048
-
Tidskriftsartikel (refereegranskat)abstract
- Importance: The patterns of disease recurrence after resection of pancreatic ductal adenocarcinoma with adjuvant chemotherapy remain unclear.Objective: To define patterns of recurrence after adjuvant chemotherapy and the association with survival.Design, Setting, and Participants: Prospectively collected data from the phase 3 European Study Group for Pancreatic Cancer 4 adjuvant clinical trial, an international multicenter study. The study included 730 patients who had resection and adjuvant chemotherapy for pancreatic cancer. Data were analyzed between July 2017 and May 2019.Interventions: Randomization to adjuvant gemcitabine or gemcitabine plus capecitabine.Main Outcomes and Measures: Overall survival, recurrence, and sites of recurrence.Results: Of the 730 patients, median age was 65 years (range 37-81 years), 414 were men (57%), and 316 were women (43%). The median follow-up time from randomization was 43.2 months (95% CI, 39.7-45.5 months), with overall survival from time of surgery of 27.9 months (95% CI, 24.8-29.9 months) with gemcitabine and 30.2 months (95% CI, 25.8-33.5 months) with the combination (HR, 0.81; 95% CI, 0.68-0.98; P=.03). The 5-year survival estimates were 17.1% (95% CI, 11.6%-23.5%) and 28.0% (22.0%-34.3%), respectively. Recurrence occurred in 479 patients (65.6%); another 78 patients (10.7%) died without recurrence. Local recurrence occurred at a median of 11.63 months (95% CI, 10.05-12.19 months), significantly different from those with distant recurrence with a median of 9.49 months (95% CI, 8.44-10.71 months) (HR, 1.21; 95% CI, 1.01-1.45; P=.04). Following recurrence, the median survival was 9.36 months (95% CI, 8.08-10.48 months) for local recurrence and 8.94 months (95% CI, 7.82-11.17 months) with distant recurrence (HR, 0.89; 95% CI, 0.73-1.09; P=.27). The median overall survival of patients with distant-only recurrence (23.03 months; 95% CI, 19.55-25.85 months) or local with distant recurrence (23.82 months; 95% CI, 17.48-28.32 months) was not significantly different from those with only local recurrence (24.83 months; 95% CI, 22.96-27.63 months) (P=.85 and P=.35, respectively). Gemcitabine plus capecitabine had a 21% reduction of death following recurrence compared with monotherapy (HR, 0.79; 95% CI, 0.64-0.98; P=.03).Conclusions and Relevance: There were no significant differences between the time to recurrence and subsequent and overall survival between local and distant recurrence. Pancreatic cancer behaves as a systemic disease requiring effective systemic therapy after resection.Trial Registration: ClinicalTrials.gov identifier: NCT00058201, EudraCT 2007-004299-38, and ISRCTN 96397434. This secondary analysis of a randomized clinical trial investigates patterns of recurrence after adjuvant chemotherapy in pancreatic cancer and the association with survival.
|
|
| 5. |
- Neasham, David, et al.
(författare)
-
Occupation and risk of lymphoma : a multicentre prospective cohort study (EPIC)
- 2011
-
Ingår i: Occupational and Environmental Medicine. - : BMJ. - 1351-0711 .- 1470-7926. ; 68:1, s. 77-81
-
Tidskriftsartikel (refereegranskat)abstract
- The findings in this current study of a higher risk of NHL among car repair workers and butchers and a higher risk of HL among gasoline station workers suggest a possible role from occupationally related exposures, such as solvents and zoonotic viruses, as risk factors for malignant lymphoma.
|
|
| 6. |
- Nerenst, Tim Brix, et al.
(författare)
-
Probabilistic Performance Evaluation and Optimization of Medical Plastic Moulded Components Subject to Large Scale Production
- 2021
-
Ingår i: ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE). - 9780791885567
-
Konferensbidrag (refereegranskat)abstract
- A new medical device can take years to develop from early concept to product launch. The long development process can be attributed to the severe consequences for the patient if the device malfunctions. Three approaches are often combined to mitigate risks: rigorous simulation and modeling, physical test programs, and Failure Mode Effect Analysis (FMEA) - all of which are time-consuming. Physical test programs are often carried out on prototype components from the same batch and, therefore, limited in revealing the actual distribution of performance. The risk probabilities are subsequently based on educated guesses. Furthermore, simulation and modeling are usually performed on nominal geometry - not accounting for variation - and only provide a safety factor against failure. The traditional use of safety factors in structural analysis versus the probabilistic approach to risk management presents an obvious misfit. Therefore, these three approaches are not ideal for addressing the two key questions that the design engineer has: 1) How often will the design fail, and 2) How should the design be changed to improve robustness and failure rates. The present work builds upon the existing Robust and Reliability-Based Design Optimization (R2BDO) and adjusts it to address the key questions above using finite element analysis. The key feature of the new framework is the focus on minimal use of computational resources while being able to screen feasible design concepts early in the embodiment phase and subsequently optimize their probabilistic performance. A case study in collaboration with a medical design and manufacturing company demonstrates the new framework. The case study includes FEA contact modeling between two plastic molded components with twelve geometrical variables. The optimization focuses on minimizing the failure rate (and improving design robustness) concerning three constraint functions (contact pressure, strain, torque). The study finds that the new framework achieves significant improvements to the component’s performance function (failure rate) with minimal computational resources.
|
|
| 7. |
- Abelev, Betty, et al.
(författare)
-
Long-range angular correlations on the near and away side in p-Pb collisions at root S-NN=5.02 TeV
- 2013
-
Ingår i: Physics Letters. Section B: Nuclear, Elementary Particle and High-Energy Physics. - : Elsevier BV. - 0370-2693. ; 719:1-3, s. 29-41
-
Tidskriftsartikel (refereegranskat)abstract
- Angular correlations between charged trigger and associated particles are measured by the ALICE detector in p-Pb collisions at a nucleon-nucleon centre-of-mass energy of 5.02 TeV for transverse momentum ranges within 0.5 < P-T,P-assoc < P-T,P-trig < 4 GeV/c. The correlations are measured over two units of pseudorapidity and full azimuthal angle in different intervals of event multiplicity, and expressed as associated yield per trigger particle. Two long-range ridge-like structures, one on the near side and one on the away side, are observed when the per-trigger yield obtained in low-multiplicity events is subtracted from the one in high-multiplicity events. The excess on the near-side is qualitatively similar to that recently reported by the CMS Collaboration, while the excess on the away-side is reported for the first time. The two-ridge structure projected onto azimuthal angle is quantified with the second and third Fourier coefficients as well as by near-side and away-side yields and widths. The yields on the near side and on the away side are equal within the uncertainties for all studied event multiplicity and p(T) bins, and the widths show no significant evolution with event multiplicity or p(T). These findings suggest that the near-side ridge is accompanied by an essentially identical away-side ridge. (c) 2013 CERN. Published by Elsevier B.V. All rights reserved.
|
|
| 8. |
- Ali, Liaqat, et al.
(författare)
-
Effects of nutrition strategy on the levels of nutrients and bioactive compounds in blackberries
- 2012
-
Ingår i: European Food Research and Technology. - : Springer Science and Business Media LLC. - 1438-2377 .- 1438-2385. ; 234:1, s. 33-44
-
Tidskriftsartikel (refereegranskat)abstract
- The effects of nutrition strategy on levels of nutrients and bioactive compounds in fruit and leaves of blackberries were studied in greenhouse-grown blackberry plants fertilised with combinations of two levels (low, high) of nitrogen (60 and 100 kg ha -1, respectively) and potassium (66.4 and 104 kg ha -1, respectively). Plant concentrations of organic phytochemicals were quantitatively analysed by high-performance liquid chromatography. High amounts of both fertilisers produced high amounts of all nutrients and bioactive compounds analysed in fruit except total acidity and ellagic acid. There were major differences in compounds affecting taste in fruit, e. g., sugars (fructose and glucose), total soluble solids and pH, and also in anthocyanin content. The concentrations of secondary metabolites, vitamin C and ellagic acid in fruit also varied significantly between treatments, although the differences were smaller. Storage of blackberries showed variable effects in the different levels of compounds, and the changes found were small. Nutrient regime did not affect blackberry leaves to the same extent, and only minor changes were found. The findings show that by optimising plant nutrition, phytonutrient levels can be maximised and maintained in fresh and stored berry crops, especially those grown in greenhouses, where conditions can easily be regulated.
|
|
| 9. |
- Andersson, Mats, et al.
(författare)
-
Toward an enzyme-based oxygen scavenging laminate. Influence of industrial lamination conditions on the performance of glucose oxidase
- 2002
-
Ingår i: Biotechnology and Bioengineering. - : Wiley. - 1097-0290 .- 0006-3592. ; 79:1, s. 37-42
-
Tidskriftsartikel (refereegranskat)abstract
- The laminate consisted of several polymer layers, aluminium, and one cellulose-based layer containing the active enzymatic system (e.g., glucose oxidase, catalase, glucose, and CaCO3). During the industrial lamination process, the enzyme layer was exposed to three temperature spikes up to 325degreesC without significant enzyme inactivation. Ninety-seven percent of the glucose oxidase activity still remained after the lamination process. The best laminate had an oxygen absorbing capacity of 7.6 +/- 1.0 L/m(2). A reference that was not laminated expressed a corresponding oxygen absorbing capacity of 7.1 +/- 0.8 L/m(2).
|
|
| 10. |
- Andersson, Thorbjörn, et al.
(författare)
-
Degradation of low density polyethylene during extrusion. : IV. Off-flavor compounds in extruded films of stabilized LDPE
- 2005
-
Ingår i: Journal of Applied Polymer Science. - : Wiley. - 0021-8995 .- 1097-4628. ; 95:3, s. 583-595
-
Tidskriftsartikel (refereegranskat)abstract
- This study was aimed at finding a correlation between the experienced off-flavor in packed foods and the presence of specific degradation products in LDPE pack-aging films. The possibility to trap degradation products by chemical reactions with scavengers, i.e., a zeolite additive or antioxidants, was investigated This would prevent degradation products from migrating to the polymer film surface and further into food in contact with the film. It was found that off-flavor noted in water packed in LDPE films depended on extrusion temperature and exposure time for the melt to oxygen, that is, the parameters that influence the contents of oxidation products that are able to migrate from the polymer film. It was also found that adsorption of oxidative degradation products in a zeolite additive or protection of LDPE by using antioxidants could prevent off-flavor in the packed product (water). However, the antioxidant should be selected with regard to extrusion temperature because thermal instability in the additive might jeopardize the intended effect. Multifunctional antioxidants seem to provide improved protection, the most effective one evaluated in this work being Irganox E201, i.e., vitamin E. Concentrations of oxidized degradation products are well correlated to the perceived off-flavor in the packed water. The highest correlation between off-flavor and oxidized components was found for ketones in the range of C 7 to C9 and aldehydes in the range of C6 to C9.
|
|
