| 1. |
- Coll, M., et al.
(författare)
-
Towards Oxide Electronics: a Roadmap
- 2019
-
Ingår i: Applied Surface Science. - : Elsevier BV. - 0169-4332 .- 1873-5584. ; 482, s. 1-93
-
Tidskriftsartikel (refereegranskat)abstract
- At the end of a rush lasting over half a century, in which CMOS technology has been experiencing a constant and breathtaking increase of device speed and density, Moore’s law is approaching the insurmountable barrier given by the ultimate atomic nature of matter. A major challenge for 21st century scientists is finding novel strategies, concepts and materials for replacing silicon-based CMOS semiconductor technologies and guaranteeing a continued and steady technological progress in next decades. Among the materials classes candidate to contribute to this momentous challenge, oxide films and heterostructures are a particularly appealing hunting ground. The vastity, intended in pure chemical terms, of this class of compounds, the complexity of their correlated behaviour, and the wealth of functional properties they display, has already made these systems the subject of choice, worldwide, of a strongly networked, dynamic and interdisciplinary research community. Oxide science and technology has been the target of a wide four-year project, named Towards Oxide-Based Electronics (TO-BE), that has been recently running in Europe and has involved as participants several hundred scientists from 29 EU countries. In this review and perspective paper, published as a final deliverable of the TO-BE Action, the opportunities of oxides as future electronic materials for Information and Communication Technologies ICT and Energy are discussed. The paper is organized as a set of contributions, all selected and ordered as individual building blocks of a wider general scheme. After a brief preface by the editors and an introductory contribution, two sections follow. The first is mainly devoted to providing a perspective on the latest theoretical and experimental methods that are employed to investigate oxides and to produce oxide-based films, heterostructures and devices. In the second, all contributions are dedicated to different specific fields of applications of oxide thin films and heterostructures, in sectors as data storage and computing, optics and plasmonics, magnonics, energy conversion and harvesting, and power electronics.
|
|
| 2. |
- Krackhardt, F., et al.
(författare)
-
Results from the "Me & My Heart" (eMocial) Study: a Randomized Evaluation of a New Smartphone-Based Support Tool to Increase Therapy Adherence of Patients with Acute Coronary Syndrome
- 2023
-
Ingår i: Cardiovascular Drugs and Therapy. - : Springer Science and Business Media LLC. - 0920-3206 .- 1573-7241. ; 37:4, s. 729-741
-
Tidskriftsartikel (refereegranskat)abstract
- Purpose This study evaluated whether patient support, administered via an electronic device-based app, increased adherence to treatment and lifestyle changes in patients with acute coronary syndrome (ACS) treated with ticagrelor in routine clinical practice. Methods Patients (aged >= 18 years) with diagnosed ACS treated with ticagrelor co-administered with low-dose acetylsalicylic acid were randomized into an active group (with support tool app for medication intake reminders and motivational messages) and a control group (without support tool app), and observed for 48 weeks (ClinicalTrials.gov Identifier: NCT02615704). Patients were asked to complete the 36-item Short-Form Health Survey (SF-36) and Lifestyle Changes Questionnaire (LSQ), and were assessed for blood pressure and body mass index (BMI) at baseline (visit 1) and at the end of the study (visit 2). Medication adherence was measured using the Brilique Adherence Questionnaire (BAQ). Results Patients (N = 676) were randomized to an active (n = 342) or a control (n = 334) group. BAQ data were available for 174 patients in the active group and 174 patients in the control group. Over the 48-week period, mean (standard deviation) adherence for the active and control groups was 96.4% (13.2%) and 91.5% (23.1%), respectively (effect of app intervention, p < 0.05). There were no significant differences in blood pressure and BMI between visits. General improvements in SF-36 and LSQ scores were observed for both groups. Conclusion The patient support tool app was associated with significant improvements in patient-reported treatment adherence compared with a data collection app alone in patients prescribed ticagrelor for ACS.
|
|
| 3. |
|
|
| 4. |
- Gesheva, Kostadinka, et al.
(författare)
-
Optical, structural and electrochromic properties of sputter deposited W-Mo oxide thin films
- 2016
-
Ingår i: INERA CONFERENCE. - : Institute of Physics Publishing (IOPP).
-
Konferensbidrag (refereegranskat)abstract
- Thin metal oxide films were investigated by a series of characterization techniques including impedance spectroscopy, spectroscopic ellipsometry, Raman spectroscopy, and Atomic Force Microscopy. Thin film deposition by reactive DC magnetron sputtering was performed at the Ångström Laboratory. W and Mo targets (5 cm diameter) and various oxygen gas flows were employed to prepare samples with different properties, whereas the gas pressure was kept constant at about 30 mTorr. The substrates were 5×5 cm2 plates of unheated glass pre-coated with ITO having a resistance of 40 ohm/sq. Film thicknesses were around 300nm as determined by surface profilometry. Newly acquired equipment was used to study optical spectra, optoelectronic properties, and film structure. Films of WO3 and of mixed W–Mo oxide with three compositions showed coloring and bleaching under the application of a small voltage. Cyclic voltammograms were recorded with a scan rate of 5 mV s–1. Ellipsometric data for the optical constants show dependence on the amount of MoOx in the chemical composition. Single MoOx film, and the mixed one with only 8% MoOx have the highest value of refractive index, and similar dispersion in the visible spectral range. Raman spectra displayed strong lines at wavenumbers between 780 cm–1 and 950 cm–1 related to stretching vibrations of WO3, and MoO3. AFM gave evidence for domains of different composition in mixed W-Mo oxide films.
|
|
| 5. |
|
|
| 6. |
- Isroi, Isroi, 1974, et al.
(författare)
-
Structural Changes of Oil Palm Empty Fruit Bunch (OPEFB) after Fungal and Phosphoric Acid Pretreatment
- 2012
-
Ingår i: Molecules. - : MDPI AG. - 1420-3049 .- 1420-3049 .- 1431-5157. ; 17:12, s. 14995-15012
-
Tidskriftsartikel (refereegranskat)abstract
- Oil palm empty fruit bunch (OPEFB) was pretreated using white-rot fungus Pleurotus floridanus, phosphoric acid or their combination, and the results were evaluated based on the biomass components, and its structural and morphological changes. The carbohydrate losses after fungal, phosphoric acid, and fungal followed by phosphoric acid pretreatments were 7.89%, 35.65%, and 33.77%, respectively. The pretreatments changed the hydrogen bonds of cellulose and linkages between lignin and carbohydrate, which is associated with crystallinity of cellulose of OPEFB. Lateral Order Index (LOI) of OPEFB with no pretreatment, with fungal, phosphoric acid, and fungal followed by phosphoric acid pretreatments were 2.77, 1.42, 0.67, and 0.60, respectively. Phosphoric acid pretreatment showed morphological changes of OPEFB, indicated by the damage of fibre structure into smaller particle size. The fungal-, phosphoric acid-, and fungal followed by phosphoric acid pretreatments have improved the digestibility of OPEFB's cellulose by 4, 6.3, and 7.4 folds, respectively.
|
|
| 7. |
- Kabir, M. M., et al.
(författare)
-
Biogas production from lignocelluloses by N-methylmorpholine-N-oxide (NMMO) pretreatment: Effects of recovery and reuse of NMMO
- 2014
-
Ingår i: Bioresource Technology. - : Elsevier BV. - 0960-8524 .- 1873-2976. ; 161, s. 446-450
-
Tidskriftsartikel (refereegranskat)abstract
- The effects of N-methylmorpholine-N-oxide (NMMO) pretreatment on barley straw and forest residues were investigated for biogas production. The pretreatments were performed at 90 degrees C with 85% NMMO for 3-30 h. The best pretreatment conditions resulted in 100% improvement in methane yield during the subsequent digestion compared to that of the untreated lignocelluloses. Methane yields of 0.23 and 0.15 Nm(3) CH4/kg VS were obtained from barley straw and forest residues, respectively, corresponding to 88% and 83% of the theoretical yields. In addition, the effects of the pretreatment with recovered and reused NMMO was also studied over the course of five cycles. Pretreatment with recycled NMMO showed the same performance as the fresh NMMO on barley straw. However, pretreatment of forest residues with recycled NMMO resulted in 55% reduction in methane yield.
|
|
| 8. |
|
|
| 9. |
|
|
| 10. |
|
|
