| 1. |
- Santoro, V., et al.
(författare)
-
HighNESS conceptual design report: Volume I
- 2024
-
Ingår i: Journal of Neutron Research. - 1023-8166 .- 1477-2655. ; 25:3-4, s. 85-314
-
Tidskriftsartikel (refereegranskat)abstract
- The European Spallation Source, currently under construction in Lund, Sweden, is a multidisciplinary international laboratory. Once completed to full specifications, it will operate the world’s most powerful pulsed neutron source. Supported by a 3 million Euro Research and Innovation Action within the EU Horizon 2020 program, a design study (HighNESS) has been completed to develop a second neutron source located below the spallation target. Compared to the first source, designed for high cold and thermal brightness, the new source has been optimized to deliver higher intensity, and a shift to longer wavelengths in the spectral regions of cold (CN, 2–20 Å), very cold (VCN, 10–120 Å), and ultracold (UCN, >500 Å) neutrons. The second source comprises a large liquid deuterium moderator designed to produce CN and support secondary VCN and UCN sources. Various options have been explored in the proposed designs, aiming for world-leading performance in neutronics. These designs will enable the development of several new instrument concepts and facilitate the implementation of a high-sensitivity neutron-antineutron oscillation experiment (NNBAR). This document serves as the Conceptual Design Report for the HighNESS project, representing its final deliverable.
|
|
| 2. |
- Santoro, V., et al.
(författare)
-
HighNESS conceptual design report: Volume II. the NNBAR experiment.
- 2024
-
Ingår i: Journal of Neutron Research. - 1023-8166 .- 1477-2655. ; 25:3-4, s. 315-406
-
Tidskriftsartikel (refereegranskat)abstract
- A key aim of the HighNESS project for the European Spallation Source is to enable cutting-edge particle physics experiments. This volume presents a conceptual design report for the NNBAR experiment. NNBAR would exploit a new cold lower moderator to make the first search in over thirty years for free neutrons converting to anti-neutrons. The observation of such a baryon-number-violating signature would be of fundamental significance and tackle open questions in modern physics, including the origin of the matter-antimatter asymmetry. This report shows the design of the beamline, supermirror focusing system, magnetic and radiation shielding, and anti-neutron detector necessary for the experiment. A range of simulation programs are employed to quantify the performance of the experiment and show how background can be suppressed. For a search with full background suppression, a sensitivity improvement of three orders of magnitude is expected, as compared with the previous search. Civil engineering studies for the NNBAR beamline are also shown, as is a costing model for the experiment.
|
|
| 3. |
|
|
| 4. |
- Kanis, J A, et al.
(författare)
-
The use of clinical risk factors enhances the performance of BMD in the prediction of hip and osteoporotic fractures in men and women.
- 2007
-
Ingår i: Osteoporosis international. - : Springer Science and Business Media LLC. - 0937-941X .- 1433-2965. ; 18:8, s. 1033-46
-
Tidskriftsartikel (refereegranskat)abstract
- SUMMARY: BMD and clinical risk factors predict hip and other osteoporotic fractures. The combination of clinical risk factors and BMD provide higher specificity and sensitivity than either alone. INTRODUCTION AND HYPOTHESES: To develop a risk assessment tool based on clinical risk factors (CRFs) with and without BMD. METHODS: Nine population-based studies were studied in which BMD and CRFs were documented at baseline. Poisson regression models were developed for hip fracture and other osteoporotic fractures, with and without hip BMD. Fracture risk was expressed as gradient of risk (GR, risk ratio/SD change in risk score). RESULTS: CRFs alone predicted hip fracture with a GR of 2.1/SD at the age of 50 years and decreased with age. The use of BMD alone provided a higher GR (3.7/SD), and was improved further with the combined use of CRFs and BMD (4.2/SD). For other osteoporotic fractures, the GRs were lower than for hip fracture. The GR with CRFs alone was 1.4/SD at the age of 50 years, similar to that provided by BMD (GR = 1.4/SD) and was not markedly increased by the combination (GR = 1.4/SD). The performance characteristics of clinical risk factors with and without BMD were validated in eleven independent population-based cohorts. CONCLUSIONS: The models developed provide the basis for the integrated use of validated clinical risk factors in men and women to aid in fracture risk prediction.
|
|
| 5. |
- Kanis, J A, et al.
(författare)
-
The use of multiple sites for the diagnosis of osteoporosis.
- 2006
-
Ingår i: Osteoporosis international. - : Springer Science and Business Media LLC. - 0937-941X .- 1433-2965. ; 17:4, s. 527-34
-
Tidskriftsartikel (refereegranskat)abstract
- INTRODUCTION: It has been suggested that bone mineral density (BMD) measurements should be made at multiple sites, and that the lowest T-score should be taken for the purpose of diagnosing osteoporosis. PURPOSE: The aim of this study was to examine the use of BMD measurements at the femoral neck and lumbar spine alone and in combination for fracture prediction. METHODS: We studied 19,071 individuals (68% women) from six prospective population-based cohorts in whom BMD was measured at both sites and fracture outcomes documented over 73,499 patient years. BMD values were converted to Z-scores, and the gradient of risk for any osteoporotic fracture and for hip fracture was examined by using a Poisson model in each cohort and each gender separately. Results of the different studies were merged using weighted beta-coefficients. RESULTS: The gradients of risk for osteoporotic fracture and for hip fracture were similar in men and women. In men and women combined, the risk of any osteoporotic fracture increased by 1.51 [95% confidence interval (CI)=1.42-1.61] per standard deviation (SD) decrease in femoral-neck BMD. For measurements made at the lumbar spine, the gradient of risk was 1.47 (95% CI=1.38-1.56). Where the minimum of the two values was used, the gradient of risk was similar (1.55; 95% CI=1.45-1.64). Higher gradients of risk were observed for hip fracture outcomes: with BMD at the femoral neck, the gradient of risk was 2.45 (95% CI=2.10-2.87), with lumbar BMD was 1.57 (95% CI=1.36-1.82), and with the minimum value of either femoral neck and lumbar spine was 2.11 (95% CI=1.81-2.45). Thus, selecting the lowest value for BMD at either the femoral neck or lumbar spine did not increase the predictive ability of BMD tests. By contrast, the sensitivity increased so that more individuals were identified but at the expense of specificity. Thus, the same effect could be achieved by using a less stringent T-score for the diagnosis of osteoporosis. CONCLUSIONS: Since taking the minimum value of the two measurements does not improve predictive ability, its clinical utility for the diagnosis of osteoporosis is low.
|
|
| 6. |
- Fujiwara, S, et al.
(författare)
-
Development and application of a Japanese model of the WHO fracture risk assessment tool (FRAX).
- 2008
-
Ingår i: Osteoporosis international. - : Springer Science and Business Media LLC. - 0937-941X .- 1433-2965. ; 19:4, s. 429-35
-
Tidskriftsartikel (refereegranskat)abstract
- SUMMARY: The present study estimated the 10-year probability using the Japanese version of WHO fracture risk assessment tool (FRAX) in order to determine fracture probabilities that correspond to intervention thresholds currently used in Japan and to resolve some issues for its use in Japan. INTRODUCTION: The objective of the present study was to evaluate a Japanese version of the WHO fracture risk assessment (FRAX) tool to compute 10-year probabilities of osteoporotic fracture in Japanese men and women. Since lumbar spine bone mineral density (BMD) is used preferentially as a site for assessment, and densitometers use Japanese reference data, a second aim was to investigate the suitability and impact of this practice in Japan. METHODS: Fracture probabilities were computed from published data on the fracture and death hazards in Japan. Probabilities took account of age, sex, the presence of clinical risk factors and femoral neck BMD. Fracture probabilities were determined that were equivalent to intervention thresholds currently used in Japan. The difference between T-scores derived from international reference data and that using Japanese-specific normal ranges was estimated from published sources. The gradient of risk of BMD for fracture in Japan was compared to that for BMD at the lumbar spine in the Hiroshima cohort. RESULTS: The 10-year probabilities of a major osteoporosis-related fracture that corresponded to current intervention thresholds ranged from approximately 5% at the age of 50 years to more than 20% at the age of 80 years. The use of femoral neck BMD predicts fracture as well as or better than BMD tests at the lumbar spine. There were small differences in T-scores between those used for the model and those derived from a Japanese reference population. CONCLUSIONS: The FRAX mark tool has been used to determine possible thresholds for therapeutic intervention, based on equivalence of risk with current guidelines. The approach will need to be supported by appropriate health economic analyses. Femoral neck BMD is suitable for the prediction of fracture risk among Japanese. However, when applying the FRAX model to Japan, T-scores and Z-scores should be converted to those derived from the international reference.
|
|
| 7. |
|
|
| 8. |
|
|
| 9. |
- Odén, Magnus, 1965-, et al.
(författare)
-
Growth of single-crystal CrN on MgO(001) : Effects of low-energy ion-irradiation on surface morphological evolution and physical properties
- 2002
-
Ingår i: Journal of Applied Physics. - : AIP Publishing. - 0021-8979 .- 1089-7550. ; 91:6, s. 3589-3597
-
Tidskriftsartikel (refereegranskat)abstract
- CrN layers, 0.5 ╡m thick, were grown on MgO(001) at Ts=570-775░C by ultrahigh vacuum magnetically unbalanced magnetron sputter deposition in pure N2 discharges at 20 mTorr. Layers grown at Ts=700░C are stoichiometric single crystals exhibiting cube-on-cube epitaxy: (001)CrN(001)MgO with [100]CrN[100]MgO. At higher temperatures, N2 desorption during deposition results in understoichiometric polycrystalline films with N fractions decreasing to 0.35, 0.28, and 0.07 with Ts=730, 760, and 775░C, respectively. The surface morphologies of epitaxial CrN(001) layers were found to depend strongly on the incident ion-to-metal flux ratio JN2+/JCr which was varied between 1.7 and 14 with the ion energy maintained constant at 12 eV. The surfaces of layers grown with JN2+/JCr=1.7 consist of self-organized square-shaped mounds, due to kinetic roughening, with edges aligned along orthogonal <100> directions. The mounds have an average peak-to-valley height =5.1 nm and an in-plane correlation length of =0.21 ╡m. The combination of atomic shadowing by the mounds with low adatom mobility results in the formation of nanopipes extending along the growth direction. Increasing JN2+/JCr to 14 leads, due to increased adatom mobilities, to much smoother surfaces with =2.5 nm and =0.52 ╡m. Correspondingly, the nanopipe density decreases from 870 to 270 ╡m-2 to <20 ╡m-2 as JN2+/JCr is increased from 1.7 to 6 to 10. The hardness of dense CrN(001) is 28.5▒1 GPa, but decreases to 22.5▒1 GPa for layers containing significant nanopipe densities. The CrN(001) elastic modulus, 405▒15 GPa, room-temperature resistivity, 7.7╫10-2 cm, and relaxed lattice constant, 0.4162▒0.0008 nm, are independent of JN2+/JCr. ⌐ 2002 American Institute of Physics.
|
|
| 10. |
|
|
