| 2. |
- Akhtar, Farid, et al.
(författare)
-
Structuring adsorbents and catalysts by processing of porous powders
- 2014
-
Ingår i: Journal of the European Ceramic Society. - : Elsevier BV. - 0955-2219 .- 1873-619X. ; 34:7, s. 1643-1666
-
Tidskriftsartikel (refereegranskat)abstract
- Microporous materials such as zeolites, metal organic frameworks, activated carbons and aluminum phosphates are suitable for catalysis and separation applications. These high surface area materials are invariably produced in particulate forms and need to be transformed into hierarchically porous structures for high performance adsorbents or catalysts. Structuring of porous powders enables an optimized structure with high mass transfer, low pressure drop, good heat management, and high mechanical and chemical stability. The requirements and important properties of hierarchically porous structures are reviewed with a focus on applications in gas separation and catalysis. Versatile powder processing routes to process porous powders into hierarchically porous structures like extrusion, coatings of scaffolds and honeycombs, colloidal processing and direct casting, and sacrificial approaches are presented and discussed. The use and limitations of the use of inorganic binders for increasing the mechanical strength is reviewed, and the most important binder systems, e.g. clays and silica, are described in detail. Recent advances to produce binder-free and complex shaped hierarchically porous monoliths are described and their performance is compared with traditional binder-containing structured adsorbents. Needs related to better thermal management and improved kinetics and volume efficiency are discussed and an outlook on future research is also given.
|
|
| 3. |
- Akhtar, Farid, et al.
(författare)
-
Thin zeolite laminates for rapid and energy-efficient carbon capture
- 2017
-
Ingår i: Scientific Reports. - : Nature Publishing Group. - 2045-2322. ; 7
-
Tidskriftsartikel (refereegranskat)abstract
- Thin, binder-less zeolite NaX laminates, with thicknesses ranging between 310 to 750 μm and widths exceeding 50 mm and biaxial tensile strength in excess of 3 MPa, were produced by pulsed current processing. The NaX laminates displayed a high CO2 adsorption capacity and high binary CO2-over-N2 and CO2-over-CH4 selectivity, suitable for CO2 capture from flue gas and upgrading of raw biogas. The thin laminates displayed a rapid CO2 uptake; NaX laminates with a thickness of 310 μm were saturated to 40% of their CO2 capacity within 24 seconds. The structured laminates of 310 μm thickness and 50 mm thickness would offer low pressure drop and efficient carbon capture performance in a laminate-based swing adsorption technology.
|
|
