| 1. |
- Abele, H., et al.
(författare)
-
Particle physics at the European Spallation Source
- 2023
-
Ingår i: Physics reports. - : Elsevier. - 0370-1573 .- 1873-6270. ; 1023, s. 1-84
-
Forskningsöversikt (refereegranskat)abstract
- Presently under construction in Lund, Sweden, the European Spallation Source (ESS) will be the world’s brightest neutron source. As such, it has the potential for a particle physics program with a unique reach and which is complementary to that available at other facilities. This paper describes proposed particle physics activities for the ESS. These encompass the exploitation of both the neutrons and neutrinos produced at the ESS for high precision (sensitivity) measurements (searches).
|
|
| 2. |
- Aguilar, J., et al.
(författare)
-
Search for Leptonic CP Violation with the ESSnuSBplus Project
- 2024
-
Ingår i: Letters in High Energy Physics. - : Andromeda Publishing And Academic Services LTD. - 2632-2714.
-
Tidskriftsartikel (refereegranskat)abstract
- ESSνSB is a design study for a next-generation long-baseline neutrino experiment that aims at the precise measurement of the CP-violating phase, δCP, in the leptonic sector at the second oscillation maximum. The conceptual design report published from the first phase of the project showed that after 10 years of data taking, more than 70% of the possible δCP range will be covered with 5σ C.L. to reject the no-CP-violation hypothesis. The expected value of δCP precision is smaller than 8◦ for all δCP values. The next phase of the project, the ESSνSB+, aims at using the intense muon flux produced together with neutrinos to measure the neutrino-nucleus cross-section, the dominant term of the systematic uncertainty, in the energy range of 0.2–0.6 GeV, using a Low Energy neutrinos from STORed Muons (LEnuSTORM) and a Low Energy Monitored Neutrino Beam (LEMNB) facilities.
|
|
| 3. |
- Aguilar, J., et al.
(författare)
-
Study of nonstandard interactions mediated by a scalar field at the ESSnuSB experiment
- 2024
-
Ingår i: Physical Review D. - : American Physical Society. - 2470-0010 .- 2470-0029. ; 109:11
-
Tidskriftsartikel (refereegranskat)abstract
- In this paper, we study scalar mediator induced nonstandard interactions (SNSIs) in the context of the ESSnuSB experiment. In particular, we study the capability of ESSnuSB to put bounds on the SNSI parameters and also study the impact of SNSIs in the measurement of the leptonic CP phase δCP. Existence of SNSIs modifies the neutrino mass matrix and this modification can be expressed in terms of three diagonal real parameters (ηee, ημμ, and ηττ) and three off-diagonal complex parameters (ηeμ, ηeτ, and ημτ). Our study shows that the upper bounds on the parameters ημμ and ηττ depend upon how Δm312 is minimized in the theory. However, this is not the case when one tries to measure the impact of SNSIs on δCP. Further, we show that the CP sensitivity of ESSnuSB can be completely lost for certain values of ηee and ημτ for which the appearance channel probability becomes independent of δCP.
|
|
| 4. |
- Burgman, A., et al.
(författare)
-
The ESSnuSB Design Study: Overview and Future Prospects
- 2023
-
Ingår i: Universe. - : MDPI. - 2218-1997. ; 9:8
-
Forskningsöversikt (refereegranskat)abstract
- ESSnuSB is a design study for an experiment to measure the CP violation in the leptonic sector at the second neutrino oscillation maximum using a neutrino beam driven by the uniquely powerful ESS linear accelerator. The reduced impact of systematic errors on sensitivity at the second maximum allows for a very precise measurement of the CP violating parameter. This review describes the fundamental advantages of measurement at the second maximum, the necessary upgrades to the ESS linac in order to produce a neutrino beam, the near and far detector complexes, and the expected physics reach of the proposed ESSnuSB experiment, concluding with the near future developments aimed at the project realization.
|
|
| 5. |
- Burgman, A., et al.
(författare)
-
The European Spallation Source neutrino super-beam conceptual design report
- 2022
-
Ingår i: The European Physical Journal Special Topics. - : Springer Nature. - 1951-6355 .- 1951-6401. ; 231:21, s. 3779-3955
-
Forskningsöversikt (refereegranskat)abstract
- A design study, named ESSνSB for European Spallation Source neutrino Super Beam, has been carried out during the years 2018–2022 of how the 5 MW proton linear accelerator of the European Spallation Source under construction in Lund, Sweden, can be used to produce the world’s most intense long-baseline neutrino beam. The high beam intensity will allow for measuring the neutrino oscillations near the second oscillation maximum at which the CP violation signal is close to three times higher than at the first maximum, where other experiments measure. This will enable CP violation discovery in the leptonic sector for a wider range of values of the CP violating phase δCPδCP and, in particular, a higher precision measurement of δCPδCP. The present Conceptual Design Report describes the results of the design study of the required upgrade of the ESS linac, of the accumulator ring used to compress the linac pulses from 2.86 ms to 1.2 μs, and of the target station, where the 5 MW proton beam is used to produce the intense neutrino beam. It also presents the design of the near detector, which is used to monitor the neutrino beam as well as to measure neutrino cross sections, and of the large underground far detector located 360 km from ESS, where the magnitude of the oscillation appearance of νe from νμ is measured. The physics performance of the ESSνSB research facility has been evaluated demonstrating that after 10 years of data-taking, leptonic CP violation can be detected with more than 5 standard deviation significance over 70% of the range of values that the CP violation phase angle δCPδCP can take and that δCPδCP can be measured with a standard error less than 8° irrespective of the measured value of δCPδCP. These results demonstrate the uniquely high physics performance of the proposed ESSνSBESSνSB research facility.
|
|
| 6. |
- Burgman, A., et al.
(författare)
-
Updated physics performance of the ESSnuSB experiment
- 2021
-
Ingår i: European Physical Journal C. - : Springer Nature. - 1434-6044 .- 1434-6052. ; 81:12
-
Tidskriftsartikel (refereegranskat)abstract
- In this paper, we present the physics performance of the ESSnuSB experiment in the standard three flavor scenario using the updated neutrino flux calculated specifically for the ESSnuSB configuration and updated migration matrices for the far detector. Taking conservative systematic uncertainties corresponding to a normalization error of 5% for signal and 10% for background, we find that there is 10 sigma (13 sigma) CP violation discovery sensitivity for the baseline option of 540 km (360 km) at delta(CP) = +/- 90 degrees. The corresponding fraction of delta(CP )for which CP violation can be discovered at more than 5 sigma is 70%. Regarding CP precision measurements, the 1 sigma error associated with delta(CP )= 0 degrees is around 5 degrees and with delta(CP )= -90 degrees is around 14 degrees (7 degrees) for the baseline option of 540 km (360 km). For hierarchy sensitivity, one can have 3 sigma sensitivity for 540 km baseline except delta(CP) = +/- 90 degrees and 5 sigma sensitivity for 360 km baseline for all values of delta(CP). The octant of theta(23) can be determined at 30 for the values of: theta(23) > 51 degrees (theta(23) < 42 degrees and theta(23) > 49 degrees) for baseline of 540 km (360 km). Regarding measurement precision of the atmospheric mixing parameters, the allowed values at 3 sigma are: 40 degrees < theta(23) < 52 degrees (42 degrees < theta(23) < 51.5 degrees) and 2.485 x 10(-3) eV(2) < Delta(2)(m31) < 2.545 x 10(-3) eV(2) (2.49x 10(-3 ) eV(2) < Delta(2)(m31) < 2.54 x 10(-3) eV(2)) for the baseline of 540 km (360 km).
|
|
| 7. |
- Wildner, E., et al.
(författare)
-
The Opportunity Offered by the ESSnuSB Project to Exploit the Larger Leptonic CP Violation Signal at the Second Oscillation Maximum and the Requirements of This Project on the ESS Accelerator Complex
- 2016
-
Ingår i: Advances in High Energy Physics. - : Hindawi Publishing Corporation. - 1687-7357 .- 1687-7365.
-
Tidskriftsartikel (refereegranskat)abstract
- The European Spallation Source (ESS), currently under construction in Lund, Sweden, is a research center that will provide, by 2023, the world's most powerful neutron source. The average power of the proton linac will be 5 MW. Pulsing this linac at higher frequency will make it possible to raise the average total beam power to 10 MW to produce, in parallel with the spallation neutron production, a very intense neutrino Super Beam of about 0.4 GeV mean neutrino energy. This will allow searching for leptonic CP violation at the second oscillation maximum where the sensitivity is about 3 times higher than at the first. The ESS neutrino Super Beam, ESSnuSB operated with a 2.0 GeV linac proton beam, together with a large undergroundWater Cherenkov detector located at 540 km from Lund, will make it possible to discover leptonic CP violation at 5 sigma. significance level in 56% (65% for an upgrade to 2.5 GeV beam energy) of the leptonic CP-violating phase range after 10 years of data taking, assuming a 5% systematic error in the neutrino flux and 10% in the neutrino cross section. The paper presents the outstanding physics reach possible for CP violation with ESSnuSB obtainable under these assumptions for the systematic errors. It also describes the upgrade of the ESS accelerator complex required for ESSnuSB.
|
|
| 8. |
- Bagni, Tommaso, et al.
(författare)
-
Modeling Results of the Quench Behavior of a Nb-Ti Canted-Cosine-Theta Corrector Magnet for LHC
- 2024
-
Ingår i: IEEE transactions on applied superconductivity (Print). - : Institute of Electrical and Electronics Engineers (IEEE). - 1051-8223 .- 1558-2515. ; 34:5, s. 1-5
-
Tidskriftsartikel (refereegranskat)abstract
- A newly designed superconducting magnet of the Canted-Cosine-Theta (CCT) type was developed as a result of a collaboration between Swedish universities (Uppsala and Linneaus) and Swedish industries. This magnet was designed to function as a replacement of the present LHC orbit corrector magnets, which are approaching their end of life due to the radiation load. As a result, the new CCT magnet was developed to be more radiation tolerant and to constitute a one-to-one replacement to the currently installed version, which is a 1 m long 70 mm double aperture dipole magnet. The final magnet, which is currently under construction, will be tested at FREIA laboratory at Uppsala University and generate a magnetic field of 3.3 T and an integrated field of 2.8 Tm at about 85 A. To examine the magnet quench behavior and to identify a suitable quench protection system, the 3D electro-magnetic and thermal behavior of the coil was modeled using the RAT-Raccoon software. Based on the simulation results, a Metrosil varistor was selected to protect the magnet during the test. In this article, we report the results of the numerical analysis. The magnet model is equipped with a spot heater to initialize the quench and the temperature and voltages are monitored during the avalanche effect. The simulated current decay and the hot-spot temperature are analyzed with a focus on the impact of quench-back on the magnet protection.
|
|
| 9. |
- Barna, D., et al.
(författare)
-
Training-free performance of the wax-impregnated SuShi septum magnet
- 2024
-
Ingår i: Superconductors Science and Technology. - : Institute of Physics (IOP). - 0953-2048 .- 1361-6668. ; 37:4
-
Tidskriftsartikel (refereegranskat)abstract
- In the framework of the Future Circular Collider Study a new septum magnet concept, nicknamed 'SuShi' has been developed, and a prototype was built at Wigner Research Center for Physics, and tested at the FREIA facility of Uppsala University in April 2023. The concept uses a canted cosine theta (CCT)-like superconducting magnet and a passive superconducting shield to create a zero-field and high-field region within its aperture. SuShi is the first CCT magnet with both of its winding layers simultaneously impregnated with wax. This paper describes the first powering test of the empty magnet at 4.2 K, without the shield being inserted in its aperture. The performance of the magnet, including the observation of quench-back, estimation of hot-spot temperatures and the fraction of energy dissipated in the magnet are presented, and most interestingly the absence of any quench during the entire testing period is reported. Sushi reached its nominal +5% peak field of 3.64 T at 450 A, which corresponds to 80% of the calculated short sample limit along the load line, without training.
|
|
| 10. |
|
|
