| 1. |
- Afewerki, Samson, 1985-, et al.
(författare)
-
Sustainable Design for the Direct Fabrication and Highly Versatile Functionalization of Nanocelluloses
- 2017
-
Ingår i: Global Challenges. - Weinheim : Wiley. - 2056-6646. ; 1:7
-
Tidskriftsartikel (refereegranskat)abstract
- This study describes a novel sustainable concept for the scalable direct fabrication and functionalization of nanocellulose from wood pulp with reduced energy consumption. A central concept is the use of metal-free small organic molecules as mediators and catalysts for the production and subsequent versatile surface engineering of the cellulosic nanomaterials via organocatalysis and click chemistry. Here, organoclick chemistry enables the selective functionalization of nanocelluloses with different organic molecules as well as the binding of palladium ions or nanoparticles. The nanocellulosic material is also shown to function as a sustainable support for heterogeneous catalysis in modern organic synthesis (e.g., Suzuki cross-coupling transformations in water). The reported strategy not only addresses obstacles and challenges for the future utilization of nanocellulose (e.g., low moisture resistance, the need for green chemistry, and energy-intensive production) but also enables new applications for nanocellulosic materials in different areas.
|
|
| 2. |
|
|
| 3. |
- Alimohammadzadeh, Rana, et al.
(författare)
-
Scalable Improvement of the Strength Properties of Chemimechanical Pulp Fibers by Eco-Friendly Catalysis
- 2018
-
Ingår i: IMPC 2018. - Trondheim, Norway.
-
Konferensbidrag (refereegranskat)abstract
- The sustainable improvement of the strength properties of chemimechanical pulp by eco-friendlycatalysis is disclosed. Significant research activities have been performed on the use of cationic starchand polyelectrolyte complexes for improving the strength properties of cellulose-based materials. Herewe apply an eco-friendly strategy based on catalysis for significantly improving the strength propertiesof sheets made from chemimechanical pulp (CTMP) and bleeched sulphite pulp (BSP) using sustainablepolyelectrolyte complexes as the strength additives and organocatalysis. This surface engineeringstrategy significantly increased the strength properties of the assembled sheets (up to 100% in the caseof Z-strength). We also developed a catalytic selective colour marking of the cationic potato starch (CS)and carboxymethylcellulose (CMC) in order to elucidated how the specific strength additives aredistributed on the sheets. It revealed that the strength additives were more evenly distributed on thesheets made from CTMP as compared to BSP sheets. This is most likely attributed to the presence oflignin in the former lignocellulosic material. It also contributes to the increase in strength (up to 100%,Z-strength) for the CTMP derived sheets. The selective colour marking method also revealed that morestrength additives had been bound to the pulps in the presence of the catalyst.
|
|
| 4. |
- Alimohammadzadeh, Rana, et al.
(författare)
-
Sustainable Surface Engineering of Lignocellulose and Cellulose by Synergistic Combination of Metal‐Free Catalysis and Polyelectrolyte Complexes
- 2019
-
Ingår i: Global Challenges. - : Wiley. - 2056-6646. ; 3
-
Tidskriftsartikel (refereegranskat)abstract
- A sustainable strategy for synergistic surface engineering of lignocellulose and cellulose fibers derived from wood by synergistic combination of metal‐free catalysis and renewable polyelectrolyte (PE) complexes is disclosed. The strategy allows for improvement and introduction of important properties such as strength, water resistance, and fluorescence to the renewable fibers and cellulosic materials. For example, the “green” surface engineering significantly increases the strength properties (up to 100% in Z‐strength) of chemi‐thermomechanical pulp (CTMP) and bleached sulphite pulp (BSP)‐derived sheets. Next, performing an organocatalytic silylation with a nontoxic organic acid makes the corresponding lignocellulose and cellulose sheets hydrophobic. A selective color modification of polysaccharides is developed by combining metal‐free catalysis and thiol‐ene click chemistry. Next, fluorescent PE complexes based on cationic starch (CS) and carboxymethylcellulose (CMC) are prepared and used for modification of CTMP or BSP in the presence of a metal‐free catalyst. Laser‐scanning confocal microscopy reveals that the PE‐strength additive is evenly distributed on the CTMP and heterogeneously on the BSP. The fluorescent CS distribution on the CTMP follows the lignin distribution of the lignocellulosic fibers.
|
|
| 5. |
- Cordova, Armando, 1970-, et al.
(författare)
-
A sustainable strategy for production and functionalization of nanocelluloses
- 2019
-
Ingår i: Pure and Applied Chemistry. - : Walter de Gruyter GmbH. - 0033-4545 .- 1365-3075. ; 91:5, s. 865-874
-
Tidskriftsartikel (refereegranskat)abstract
- A sustainable strategy for the neat production and surface functionalization of nanocellulose from wood pulp is disclosed. It is based on the combination of organocatalysis and click chemistry (organoclick chemistry) and starts with nanocellulose production by organic acid catalyzed hydrolysis and esterification of the pulp under neat conditions followed by homogenization. This nanocellulose fabrication route is scalable, reduces energy consumption and the organic acid can be efficiently recycled. Next, the surface is catalytically engineered by organoclick chemistry, which allows for selective and versatile attachment of different organic molecules (e.g. fluorescent probes, catalyst and pharmaceuticals). It also enables binding of metal ions and nanoparticles. This was exemplified by the fabrication of a heterogeneous nanocellulose palladium nanoparticle catalyst, which is used for Suzuki cross-coupling transformations in water. The disclosed surface functionalization methodology is broad in scope and applicable to different nanocelluloses and cellulose based materials as well.
|
|
| 6. |
- Fiskari, Juha, 1967-, et al.
(författare)
-
Deep eutectic solvent delignification to low-energy mechanical pulp to produce papermaking fibers
- 2020
-
Ingår i: BioResources. - 1930-2126. ; 15:3, s. 6023-6032
-
Tidskriftsartikel (refereegranskat)abstract
- A novel process based on low-energy mechanical pulp and deep eutectic solvents (DESs) was evaluated with the goal of producing fibers suitable for papermaking. Ideally, these fibers could be produced at much lower costs, especially when applied to an existing paper mill equipped with a thermomechanical pulp (TMP) production line that was threatened with shutdown due to the decreasing demand for wood-containing paper grades. The efficiency of DES delignification in Teflon-coated autoclaves and in a specially designed non-standard flow extractor was evaluated. All tested DESs had choline chloride ([Ch]Cl) as the hydrogen bond acceptor. Lactic acid, oxalic acid, malic acid, or urea acted as hydrogen bond donors. The temperatures and times of the delignification tests were varied. Chemical analysis of the pulp samples revealed that DESs containing lactic acid, oxalic acid, or urea decreased the lignin content by approximately 50%. The DES delignification based on [Ch]Cl and urea exhibited good hemicellulose retention while DES systems based on organic acids resulted in varying hemicellulose losses. The [Ch]Cl / urea mixture did not appear to be corrosive to stainless steel, which was another advantage of this DES system.
|
|
| 7. |
- Fiskari, Juha, et al.
(författare)
-
Deep Eutectic Solvent Treatment to Low-Energy TMP to Produce Fibers for Papermaking
- 2018
-
Ingår i: IMPC 2018. - Trondheim, Norway.
-
Konferensbidrag (refereegranskat)abstract
- The aim of this research was to gain a better understanding on whether a novel process based on low-energy thermo-mechanical pulp (TMP) process followed by a chemical treatment with deep eutectic solvents (DESs) could produce fibers suitable for papermaking. In full scale production, these fibers could be produced at a much lower capital and operational costs, especially when utilizing existing TMP plants which are under the threat to be shut down or have already been shut down due to a decreasing demand for newsprint and other wood-containing papers.The efficiency of several DES treatments under various temperatures and times were evaluated by carrying out experiments in standard Teflon-lined autoclaves. A few tests were also performed in a unique nonstandard flow extractor. Pulp samples were characterized for their cellulose, hemicellulose and lignin contents. Moreover, tensile index was measured both before and after pulp refining. Depending on the solvent, the response of mechanical pulp varied, especially in terms of hemicellulose dissolution. Lactic acid, oxalic acid and urea, all in combination with choline chloride ([Ch]Cl) as the hydrogen bond acceptor, dissolved about 50% of the lignin of the low-energy TMP fibers under the tested conditions. The mixture of malic acid and [Ch]Cl was less effective in lignin dissolution. The mixture of urea and [Ch]Cl exhibited only a minor loss in hemicellulose content, when compared to the other tested DESs. Although 50% of the lignin was dissolved with minor loss in hemicellulose no improvement in tensile strength was observed, as it was rather the opposite. Another benefit with the mixture of urea and [Ch]Cl was that this DES did not appear to be corrosive to stainless steel. All other tested DESs—which were also quite acidic—were observed to be corrosive. Moreover, this DES-related corrosion was found to intensify at elevated temperatures.When chips were used as starting material with otherwise the same conditions almost no lignin was dissolved. This suggests that low-energy mechanical pulp is likely to be a good starting material for extracting lignin using DESs.
|
|
| 8. |
|
|
| 9. |
|
|
| 10. |
- Osong, Sinke H., et al.
(författare)
-
Nano-ligno-cellulose as strength enhancer in handsheets
- 2013
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- In recent years, there has been tremendous work in the research field of nanocellulose or microfibrillated cellulose but, very few scholars have envisioned the use of the low quality fibre fraction of mechanical pulps for the production of mechanical pulp based nanocellulose, referred to as nano-ligno-cellulose (NLC) in this paper. Today, it has been noticed by many that there has been an economic downturn in the pulp and paper industry and that this adverse situation could be somewhat alleviated by possibly searching for better products or by improving the material quality of existing products (papers and paperboards). This paper presents results related to paper strength properties based on testing of handsheets of pulp fibres blended with nanocellulose. The results indicate that the addition of nano-ligno-cellulose (NLC) to chemi-thermomechanical pulp (CTMP) fibres improved the z-strength property of laboratory sheets with only a slight effect in relation to the sheet density. Also the crill characterisation method was used to evaluate fibre size distribution. The measurement of crill is based on optical response of a suspension at two wavelengths of light; UV and IR. The UV light contains information on both the total fibres and the crill, while IR only contains information on fibres. Results showed that the crill value of NLC of CTMP correlated (linearly) fairly well with the homogenisation time.
|
|
