| 1. |
- Abb, Marcel J.S., et al.
(författare)
-
Thermal Stability of Single-Crystalline IrO2(110) Layers : Spectroscopic and Adsorption Studies
- 2020
-
Ingår i: Journal of Physical Chemistry C. - : American Chemical Society (ACS). - 1932-7447 .- 1932-7455. ; 124:28, s. 15324-15336
-
Tidskriftsartikel (refereegranskat)abstract
- The interaction of ultrathin single-crystalline IrO2(110) films with the gas phase proceeds via the coordinatively unsaturated sites (cus), in particular Ircus, the undercoordinated oxygen species on-top O (Oot) that are coordinated to Ircus, and bridging O (Obr). With the combination of different experimental techniques, such as thermal desorption spectroscopy, scanning tunneling microscopy (STM), high-resolution core-level spectroscopy (HRCLS), infrared spectroscopy, and first-principles studies employing density functional theory calculations, we are able to elucidate surface properties of single-crystalline IrO2(110). We provide spectroscopic fingerprints of the active surface sites of IrO2(110). The freshly prepared IrO2(110) surface is virtually inactive toward gas-phase molecules. The IrO2(110) surface needs to be activated by annealing to 500-600 K under ultrahigh vacuum (UHV) conditions. In the activation step, Ircus sites are liberated from on-top oxygen (Oot) and monoatomic Ir metal islands are formed on the surface, leading to the formation of a bifunctional model catalyst. Vacant Ircus sites of IrO2(110) allow for strong interaction and accommodation of molecules from the gas phase. For instance, CO can adsorb atop on Ircus and water forms a strongly bound water layer on the activated IrO2(110) surface. Single-crystalline IrO2(110) is thermally not very stable although chemically stable. Chemical reduction of IrO2(110) by extensive CO exposure at 473 K is not observed, which is in contrast to the prototypical RuO2(110) system.
|
|
| 2. |
- Abbondanza, Giuseppe, et al.
(författare)
-
Anisotropic strain variations during the confined growth of Au nanowires
- 2023
-
Ingår i: Applied Physics Letters. - : AIP Publishing. - 0003-6951 .- 1077-3118. ; 122:12
-
Tidskriftsartikel (refereegranskat)abstract
- The electrochemical growth of Au nanowires in a template of nanoporous anodic aluminum oxide was investigated in situ by means of grazing-incidence transmission small- and wide-angle x-ray scattering (GTSAXS and GTWAXS), x-ray fluorescence (XRF), and two-dimensional surface optical reflectance. The XRF and the overall intensity of the GTWAXS patterns as a function of time were used to monitor the progress of the electrodeposition. Furthermore, we extracted powder diffraction patterns in the direction of growth and in the direction of confinement to follow the evolution of the direction-dependent strain. Quite rapidly after the beginning of the electrodeposition, the strain became tensile in the vertical direction and compressive in the horizontal direction, which showed that the lattice deformation of the nanostructures can be artificially varied by an appropriate choice of the deposition time. By alternating sequences of electrodeposition with sequences of rest, we observed fluctuations of the lattice parameter in the direction of growth, attributed to stress caused by electromigration. Furthermore, the porous domain size calculated from the GTSAXS patterns was used to monitor how homogeneously the pores were filled.
|
|
| 3. |
- Abbondanza, Giuseppe, 1991, et al.
(författare)
-
Hydride formation and dynamic phase changes during template-assisted Pd electrodeposition
- 2023
-
Ingår i: Nanotechnology. - 1361-6528 .- 0957-4484. ; 34:50
-
Tidskriftsartikel (refereegranskat)abstract
- We investigated the structural evolution of electrochemically fabricated Pd nanowires in situ by means of grazing-incidence transmission small- and wide-angle x-ray scattering (GTSAXS and GTWAXS), x-ray fluorescence (XRF) and two-dimensional surface optical reflectance (2D-SOR). This shows how electrodeposition and the hydrogen evolution reaction (HER) compete and interact during Pd electrodepositon. During the bottom-up growth of the nanowires, we show that beta-phase Pd hydride is formed. Suspending the electrodeposition then leads to a phase transition from beta-phase Pd hydride to alpha-phase Pd. Additionally, we find that grain coalescence later hinders the incorporation of hydrogen in the Pd unit cell. GTSAXS and 2D-SOR provide complementary information on the volume fraction of the pores occupied by Pd, while XRF was used to monitor the amount of Pd electrodeposited.
|
|
| 4. |
|
|
| 5. |
- Hofmann, Jan Philipp, et al.
(författare)
-
Dynamic response of chlorine atoms on a RuO2(110) model catalyst surface
- 2010
-
Ingår i: Physical Chemistry Chemical Physics. - : Royal Society of Chemistry (RSC). - 1463-9084 .- 1463-9076. ; 12:47, s. 15358-15366
-
Tidskriftsartikel (refereegranskat)abstract
- The dynamic behavior of surface accommodated chlorine atoms on RuO2(110) was studied by a variety of experimental methods including high resolution core level shift, thermal desorption-, and in situ infrared spectroscopy as well as in situ surface X-ray diffraction in combination with state-of-the-art density functional theory calculations. On the chlorinated RuO2(110) surface the undercoordinated oxygen atoms have been selectively replaced by chlorine. These strongly bound surface chlorine atoms shift from bridging to on-top sites when the sample is annealed in oxygen, while the reverse shift of Cl from on-top into bridge positions is observed during CO exposure; the vacant bridge position is then occupied by either chlorine or CO. For the CO oxidation reaction over chlorinated RuO2(110), the reactant induced site switching of chlorine causes a site-blocking of the catalytically active one-fold coordinatively unsaturated (1f-cus) Ru sites. This site blocking reduces the number of active sites and, even more important, on-top Cl blocks the free migration of the adsorbed reactants along the one-dimensional 1f-cus Ru rows, thus leading to a loss of catalytic activity.
|
|
| 6. |
- Hofmann, Jan Philipp, et al.
(författare)
-
Hydrogen-Promoted Chlorination of RuO2(110)
- 2010
-
Ingår i: Journal of Physical Chemistry C. - : American Chemical Society (ACS). - 1932-7447 .- 1932-7455. ; 114:24, s. 10901-10909
-
Tidskriftsartikel (refereegranskat)abstract
- High-resolution core-level photoemission spectroscopy and temperature-programmed reaction experiments together with density functional theory calculations were used to elucidate on the atomic scale the chlorination mechanism of ruthenium dioxide RuO2(110) by hydrogen chloride exposure. The surface-selective chlorination accounts for the extraordinary stability of the RuO2 catalyst in the Sumitomo process-the heterogeneously catalyzed oxidation of hydrogen chloride by oxygen. The selective replacement of bridging oxygen atoms by chlorine atoms depends on the formation of water molecules serving as leaving groups. Water is produced by the chlorine-assisted recombination of two neighboring surface hydroxyl groups at around 450 K, a temperature where water instantaneously leaves the surface. Finally, the bridging vacancy is rapidly filled in by chlorine atoms, thereby forming bridging chlorine atoms. Preadsorbed hydrogen has shown to facilitate the chlorination process for stoichiometry reasons. The general strategy of transforming bridging O atoms into a good leaving group has been corroborated by the chlorination of RuO2(110) via CO pretreatment with CO2 as the leaving group and subsequent Cl-2 exposure.
|
|
| 7. |
- Koller, Volkmar, et al.
(författare)
-
Critical Step in the HCl Oxidation Reaction over Single-Crystalline CeO2-x(111) : Peroxo-Induced Site Change of Strongly Adsorbed Surface Chlorine
- 2023
-
Ingår i: ACS Catalysis. - 2155-5435. ; 13:19, s. 12994-13007
-
Tidskriftsartikel (refereegranskat)abstract
- The catalytic oxidation of HCl by molecular oxygen (Deacon process) over ceria allows the recovery of molecular chlorine from the omnipresent HCl waste produced in various industrial processes. In previous density functional theory (DFT) model-calculations by Amrute et al. [ J. Catal. 2012, 286, 287−297.], it was proposed that the most critical reaction step in this process is the displacement of tightly bound chlorine at a vacant oxygen position on the CeO2(111) surface (Clvac) toward a less strongly bound cerium on-top (Cltop) position. This step is highly endothermic by more than 2 eV. On the basis of a dedicated model study, namely the reoxidation of a chlorinated single-crystalline Clvac-CeO2-x(111)-(Formula Presented × Formula Presented)R30° surface structure, we provide in situ synchrotron-based spectroscopic data (high resolution core level spectroscopy (HRCLS) and X-ray adsorption near edge structure (XANES)) for this oxygen-induced dechlorination process. Combined with theoretical evidence from DFT calculations, the Clvac → Cltop displacement reaction is predicted to be induced by an adsorbed peroxo species (O22-), making the displacement step concerted and exothermic by 0.6 eV with an activation barrier of only 1.04 eV. The peroxo species is shown to be important for the reoxidation of Clvac-CeO2-x(111) and is considered essential for understanding the function of ceria in oxidation catalysis.
|
|
| 8. |
- Larsson, Alfred, et al.
(författare)
-
Dynamics of early-stage oxide formation on a Ni-Cr-Mo alloy
- 2024
-
Ingår i: NPJ MATERIALS DEGRADATION. - : Springer Nature. - 2397-2106. ; 8:1
-
Tidskriftsartikel (refereegranskat)abstract
- Corrosion results in large costs and environmental impact but can be controlled by thin oxide films that passivate the metal surfaces and hinder further oxidation or dissolution in an aqueous environment. The structure, chemistry, and thickness of these oxide films play a significant role in determining their anti-corrosion properties and the early-stage oxidation dynamics affect the properties of the developed oxide. Here, we use in situ X-ray Photoelectron Spectroscopy (XPS) to study the early-stage oxidation of a Ni-Cr-Mo alloy at room temperature and up to 400 degrees C. Cr and Mo begin to oxidize immediately after exposure to O2, and Cr3+, Mo4+, and Mo6+ oxides are formed. In contrast, Ni does not contribute significantly to the oxide film. A self-limiting oxide thickness, which did not depend on temperature below 400 degrees C, is observed. This is attributed to the consumption of available Cr and Mo near the surface, which results in an enrichment of metallic Ni under the oxide. The self-limited oxide thickness is 6-8 angstrom, which corresponds to 3-4 atomic layers of cations in the oxide. At 400 degrees C, sublimation of Mo6+ oxide is observed, resulting in the formation of an almost pure layer of Cr2O3 on the alloy surface. Lastly, a mechanism is presented that explains the formation of the bi-layer oxide structure observed for Ni-Cr-Mo alloys, which involves the enhanced migration of hexavalent Mo ions in the electric field, which drives mass transport during oxidation according to both the Cabrera Mott model and the Point Defect Model.
|
|
| 9. |
|
|
| 10. |
- Weber, Tim, et al.
(författare)
-
Extraordinary Stability of IrO2(110) Ultrathin Films Supported on TiO2(110) under Cathodic Polarization
- 2020
-
Ingår i: Journal of Physical Chemistry Letters. - : American Chemical Society (ACS). - 1948-7185. ; , s. 9057-9062
-
Tidskriftsartikel (refereegranskat)abstract
- Down to a cathodic potentials of -1.20 V versus the reversible hydrogen electrode, the structure of IrO2(110) electrodes supported by TiO2(110) is found to be stable by in situ synchrotron-based X-ray diffraction. Such high cathodic potentials should lead to reduction to metallic Ir (Pourbaix diagram). From the IrO2 lattice parameters, determined during cathodic polarization in a H2SO4 electrolyte solution (pH 0.4), it is estimated that the unit cell volume increases by 1% due likely to proton incorporation, which is supported by the lack of significant swelling of the IrO2(110) film derived from X-ray reflectivity experiments. Ex situ X-ray photoelectron spectroscopy suggests that protons are incorporated into the IrO2(110) lattice below -1.0 V, although Ir remains exclusively in the IV+ oxidation state down to -1.20 V. Obviously, further hydrogenation of the lattice oxygen of IrO2(110) toward water is suppressed for kinetic reasons and hints at a rate-determining chemical step that cannot be controlled by the electrode potential.
|
|
