| 1. |
- Kisielewicz, Agnieszka, et al.
(författare)
-
In-process spectroscopic detection of chromium loss during Directed Energy Deposition of alloy 718
- 2020
-
Ingår i: Materials & design. - : Elsevier BV. - 0264-1275 .- 1873-4197. ; 186
-
Tidskriftsartikel (refereegranskat)abstract
- In this work, a fast optical spectrometer was used to monitor the Directed Energy Deposition (DED) process, during the deposition of Alloy 718 samples with different laser power, thus different energy inputs into the material. Spectroscopic measurements revealed the presence of excited Cr I atoms in the plasma plume. The presence was more apparent for the samples characterized by higher energy input. The Cr depletion from these samples was confirmed by lower Cr content detected by Energy-Dispersive X-ray Spectroscopy (EDS) analysis. The samples were also characterized by higher oxidation and high-temperature corrosion rates in comparison to the samples produced with low energy input. These results prove the applicability of an optical emission spectroscopic system for monitoring DED to identify process conditions leading to compositional changes and variation in the quality of the built material.
|
|
| 2. |
- Mi, Yongcui, 1986-, et al.
(författare)
-
Beam shaping with a deformable mirror for gap bridging in autogenous laser butt welding
- 2023
-
Ingår i: Optics and Lasers in Engineering. - 0143-8166. ; 169
-
Tidskriftsartikel (refereegranskat)abstract
- In autogenous laser butt welding the variability of the joint gap can cause problems in terms of weld seam quality. A suitable strategy to alleviate this is to dynamically shape the laser beam instead of a circular-shaped beam with typical Gaussian or top hat distributions. Currently available systems cannot reach sufficient performance due to both the real time control system for the shape variation and the limited laser power currently manageable. In the present work, the possibility of bridging the joint gap during welding using a deformable mirror to elongate the focused laser beam from circular to transversal elliptical shape was investigated. The effect of the beam shaping on the geometry of the weld pool and of the weld cross sections was analysed, for different values of the gap in comparison with a circular Gaussian beam. It was demonstrated that the adoption of a transversal elliptical laser beam makes the welding process more stable, especially for large gaps (i.e. larger than the circular beam radius). Thanks to the beam shaping, the extension of the fused zone (in terms of the cross section area, height and width) resulted to be less sensitive to the gap's dimension; in addition, the extension of the heat affected zone and the presence of undercuts were evidently reduced.
|
|
| 3. |
- Tricarico, Luigi, et al.
(författare)
-
Numerical and experimental investigation of the discrete spot laser hardening of a graphite-coated hypereutectoid steel using a fibre laser
- 2019
-
Ingår i: The International Journal of Advanced Manufacturing Technology. - : Springer Science and Business Media LLC. - 0268-3768 .- 1433-3015. ; 104:1-4, s. 1393-1402
-
Tidskriftsartikel (refereegranskat)abstract
- The single-pulse laser hardening of a hypereutectoid steel coated by a graphite layer was investigated using a numerical/experimental approach. Experimental tests were conducted on coated samples using a fibre laser source and without any gas shielding aiming to explore the effect of laser power, pulse energy and defocusing distance on the dimensions of the hardened region. The process operating window of the discrete spot laser hardening using the graphite layer was determined through a finite element model and compared with previous results obtained on uncoated samples. For the same laser power and interaction times, an enlargement of the hardened region was found when using the graphite coating, especially when operating at the lowest laser energy level. The process operating window remains similar in shape to the one of the uncoated steel but moves towards larger hardened diameters and much larger defocusing distances. Once the maximum temperature has been fixed, a linear relationship between the hardened diameter and the defocusing distance exists. No obvious surface oxidation occurs since the graphite coating acts as a protective layer. © 2019, Springer-Verlag London Ltd., part of Springer Nature.
|
|
