| 1. |
- Beal, Jacob, et al.
(författare)
-
Robust estimation of bacterial cell count from optical density
- 2020
-
Ingår i: Communications Biology. - : Springer Science and Business Media LLC. - 2399-3642. ; 3:1
-
Tidskriftsartikel (refereegranskat)abstract
- Optical density (OD) is widely used to estimate the density of cells in liquid culture, but cannot be compared between instruments without a standardized calibration protocol and is challenging to relate to actual cell count. We address this with an interlaboratory study comparing three simple, low-cost, and highly accessible OD calibration protocols across 244 laboratories, applied to eight strains of constitutive GFP-expressing E. coli. Based on our results, we recommend calibrating OD to estimated cell count using serial dilution of silica microspheres, which produces highly precise calibration (95.5% of residuals <1.2-fold), is easily assessed for quality control, also assesses instrument effective linear range, and can be combined with fluorescence calibration to obtain units of Molecules of Equivalent Fluorescein (MEFL) per cell, allowing direct comparison and data fusion with flow cytometry measurements: in our study, fluorescence per cell measurements showed only a 1.07-fold mean difference between plate reader and flow cytometry data.
|
|
| 2. |
- Klionsky, Daniel J., et al.
(författare)
-
Guidelines for the use and interpretation of assays for monitoring autophagy
- 2012
-
Ingår i: Autophagy. - : Informa UK Limited. - 1554-8635 .- 1554-8627. ; 8:4, s. 445-544
-
Forskningsöversikt (refereegranskat)abstract
- In 2008 we published the first set of guidelines for standardizing research in autophagy. Since then, research on this topic has continued to accelerate, and many new scientists have entered the field. Our knowledge base and relevant new technologies have also been expanding. Accordingly, it is important to update these guidelines for monitoring autophagy in different organisms. Various reviews have described the range of assays that have been used for this purpose. Nevertheless, there continues to be confusion regarding acceptable methods to measure autophagy, especially in multicellular eukaryotes. A key point that needs to be emphasized is that there is a difference between measurements that monitor the numbers or volume of autophagic elements (e.g., autophagosomes or autolysosomes) at any stage of the autophagic process vs. those that measure flux through the autophagy pathway (i.e., the complete process); thus, a block in macroautophagy that results in autophagosome accumulation needs to be differentiated from stimuli that result in increased autophagic activity, defined as increased autophagy induction coupled with increased delivery to, and degradation within, lysosomes (in most higher eukaryotes and some protists such as Dictyostelium) or the vacuole (in plants and fungi). In other words, it is especially important that investigators new to the field understand that the appearance of more autophagosomes does not necessarily equate with more autophagy. In fact, in many cases, autophagosomes accumulate because of a block in trafficking to lysosomes without a concomitant change in autophagosome biogenesis, whereas an increase in autolysosomes may reflect a reduction in degradative activity. Here, we present a set of guidelines for the selection and interpretation of methods for use by investigators who aim to examine macroautophagy and related processes, as well as for reviewers who need to provide realistic and reasonable critiques of papers that are focused on these processes. These guidelines are not meant to be a formulaic set of rules, because the appropriate assays depend in part on the question being asked and the system being used. In addition, we emphasize that no individual assay is guaranteed to be the most appropriate one in every situation, and we strongly recommend the use of multiple assays to monitor autophagy. In these guidelines, we consider these various methods of assessing autophagy and what information can, or cannot, be obtained from them. Finally, by discussing the merits and limits of particular autophagy assays, we hope to encourage technical innovation in the field.
|
|
| 3. |
- Bast, Sigvard, et al.
(författare)
-
(Re)Planning of green infrastructure and nature-based solutions for sustainable urban transition
- 2022
-
Ingår i: Book of abstracts. ; , s. 338-
-
Konferensbidrag (refereegranskat)abstract
- Landscape approaches are important for planning of urban sprawl in peri-urban landscapes, continuously emerging in many metropolitan regions. In the case of Stockholm Region, land-take and incremental urbanisation is a continouous process, while the regional development plan has ambitions to steer the overall development in a sustainable direction. This plan contains a green infrastructure effort building on a set of green wedges, mainly serving as support to the needs of the city and suburbs and their citizens. This initiative differ from the later green infrastructure action plan provided by the county administrative board, related to the EU biodiversity strategy and guidelines. The latter has a different approach, mainly targeting biodiversity goals as well as ecosystem services. These approaches differ from each other in several ways while both have unclear roles when it comes to municipal planning on different levels. Furthermore, the municipalities have their own initiatives when it comes to green infrastructure and nature-based solutions and it is not clear how the different planning tiers are linked to each other, to planning and management, and to multifunctional landscapes. The aim of the REPLAN project is to investigate how the different green infrastructure initiatives are linked to planning, to each other on different scales, and whether they can serve multi-functional landscapes when it comes to biodiversity and different ecosystem services. The REPLAN project involves stakeholders and practitioners on different planning levels for co-producing knowledge, methods and strategies for green infrastructure and nature-based solutions to serve as tools for sustainable transition of metropolitan areas and their peri-urban landscapes.
|
|
| 4. |
- Chen, XÍ, et al.
(författare)
-
TDHQ Enabling Fine-granularity Adaptive Loading for SSB-DMT Systems
- 2018
-
Ingår i: IEEE Photonics Technology Letters. - : Institute of Electrical and Electronics Engineers Inc.. - 1041-1135 .- 1941-0174. ; 30:19, s. 1687-1690
-
Tidskriftsartikel (refereegranskat)abstract
- In this letter, we introduce time domain hybrid quadrature amplitude modulation (TDHQ) for the single sideband (SSB) discrete multi-tone (DMT) systems. Experimental results reveal that with a single precoding set and the proposed adaptive loading algorithm, the TDHQ scheme can achieve finer granularity and therefore smoother continuous growth of data rate than that with the conventional quadrature amplitude modulation (QAM). Besides, thanks to the frame construction and the tailored mapping rule, the scheme with TDHQ has an obviously better peak to average power ratio (PAPR).
|
|
| 5. |
- Chong, Hui, et al.
(författare)
-
Organo-ptii complexes for potent photodynamic inactivation of multi-drug resistant bacteria and the influence of configuration
- 2024
-
Ingår i: Advanced Science. - : John Wiley & Sons. - 2198-3844. ; 11:14
-
Tidskriftsartikel (refereegranskat)abstract
- PtII based organometallic photosensitizers (PSs) have emerged as novel potent photodynamic inactivation (PDI) reagents through their enhanced intersystem crossing (ISC) processes. Currently, few PtII PSs have been investigated as antibacterial materials, with relatively poor performances reported and with structure-activity relationships not well described. Herein, a pair of configurational isomers are reported of Bis-BODIPY (4,4-difluoro-boradizaindacene) embedded PtII PSs. The cis-isomer (cis-BBP) displayed enhanced 1O2 generation and better bacterial membrane anchoring capability as compared to the trans-isomer (trans-BBP). The effective PDI concentrations (efficiency > 99.9%) for cis-BBP in Acinetobacter baumannii (multi-drug resistant (MDR)) and Staphylococcus aureus are 400 nM (12 J cm−2) and 100 nM (18 J cm−2), respectively; corresponding concentrations and light doses for trans-BBP in the two bacteria are 2.50 µM (30 J cm−2) and 1.50 µM (18 J cm−2), respectively. The 50% and 90% minimum inhibitory concentration (MIC50 and MIC90) ratio of trans-BBP to cis-BBP is 22.22 and 24.02 in A. baumannii (MDR); 21.29 and 22.36 in methicillin resistant S. aureus (MRSA), respectively. Furthermore, cis-BBP displays superior in vivo antibacterial performance, with acceptable dark and photoinduced cytotoxicity. These results demonstrate cis-BBP is a robust light-assisted antibacterial reagent at sub-micromolecular concentrations. More importantly, configuration of PtII PSs should be an important issue to be considered in further PDI reagents design.
|
|
| 6. |
- Gardumi, Francesco, et al.
(författare)
-
Carrying out a multi-model integrated assessment of European energy transition pathways : Challenges and benefits
- 2022
-
Ingår i: Energy. - : Elsevier BV. - 0360-5442 .- 1873-6785. ; 258, s. 124329-124329
-
Tidskriftsartikel (refereegranskat)abstract
- With the publication of the European Green Deal, the European Union has committed to reaching carbon neutrality by 2050. The envisaged reductions of direct greenhouse gases emissions are seen as technically feasible, but if a wrong path is pursued, significant unintended impacts across borders, sectors, societies and ecosystems may follow. Without the insights gained from an impact assessment framework reaching beyond the techno-economic perspective, the pursuit of direct emission reductions may lead to counterproductive outcomes in the long run. We discuss the opportunities and challenges related to the creation and use of an integrated assessment framework built to inform the European Commission on the path to decarbonisation. The framework is peculiar in that it goes beyond existing ones in its scope, depth and cross-scale coverage, by use of numerous specialised models and case studies. We find challenges of consistency that can be overcome by linking modelling tools iteratively in some cases, harmonising modelling assumptions in others, comparing model outputs in others. We find the highest added value of the framework in additional insights it provides on the technical feasibility of decarbonisation pathways, on vulnerability aspects and on unintended environmental and health impacts on national and sub-national scale.
|
|
| 7. |
|
|
| 8. |
|
|
| 9. |
- Klionsky, Daniel J., et al.
(författare)
-
Guidelines for the use and interpretation of assays for monitoring autophagy in higher eukaryotes
- 2008
-
Ingår i: Autophagy. - : Landes Bioscience. - 1554-8627 .- 1554-8635. ; 4:2, s. 151-175
-
Forskningsöversikt (refereegranskat)abstract
- Research in autophagy continues to accelerate,1 and as a result many new scientists are entering the field. Accordingly, it is important to establish a standard set of criteria for monitoring macroautophagy in different organisms. Recent reviews have described the range of assays that have been used for this purpose.2,3 There are many useful and convenient methods that can be used to monitor macroautophagy in yeast, but relatively few in other model systems, and there is much confusion regarding acceptable methods to measure macroautophagy in higher eukaryotes. A key point that needs to be emphasized is that there is a difference between measurements that monitor the numbers of autophagosomes versus those that measure flux through the autophagy pathway; thus, a block in macroautophagy that results in autophagosome accumulation needs to be differentiated from fully functional autophagy that includes delivery to, and degradation within, lysosomes (in most higher eukaryotes) or the vacuole (in plants and fungi). Here, we present a set of guidelines for the selection and interpretation of the methods that can be used by investigators who are attempting to examine macroautophagy and related processes, as well as by reviewers who need to provide realistic and reasonable critiques of papers that investigate these processes. This set of guidelines is not meant to be a formulaic set of rules, because the appropriate assays depend in part on the question being asked and the system being used. In addition, we emphasize that no individual assay is guaranteed to be the most appropriate one in every situation, and we strongly recommend the use of multiple assays to verify an autophagic response.
|
|
| 10. |
- Kong, Depeng, et al.
(författare)
-
Bioinspired Co-Design of Tactile Sensor and Deep Learning Algorithm for Human-Robot Interaction
- 2022
-
Ingår i: ADVANCED INTELLIGENT SYSTEMS. - : Wiley. - 2640-4567. ; 4:6
-
Tidskriftsartikel (refereegranskat)abstract
- Robots equipped with bionic skins for enhancing the robot perception capability are increasingly deployed in wide applications ranging from healthcare to industry. Artificial intelligence algorithms that can provide bionic skins with efficient signal processing functions further accelerate the development of this trend. Inspired by the somatosensory processing hierarchy of humans, the bioinspired co-design of a tactile sensor and a deep learning-based algorithm is proposed herein, simplifying the sensor structure while providing computation-enhanced tactile sensing performance. The soft piezoresistive sensor, based on the carbon black-coated polyurethane sponge, offers a continuous sensing area. By utilizing a customized deep neural network (DNN), it can detect external tactile stimulus spatially continuously. Besides, a novel data augmentation method is developed based on the sensor's hexagonal structure that has a sixfold rotation symmetry. It can significantly enhance the generalization ability of the DNN model by enriching the collected training data with generated pseudo-data. The functionality of the sensor and the robustness of the proposed data augmentation strategy are verified by precisely recognizing five touch modalities, illustrating a well-generalized performance, and providing a promising application prospect in human-robot interaction.
|
|
