| 1. |
- Beal, Jacob, et al.
(författare)
-
Robust estimation of bacterial cell count from optical density
- 2020
-
Ingår i: Communications Biology. - : Springer Science and Business Media LLC. - 2399-3642. ; 3:1
-
Tidskriftsartikel (refereegranskat)abstract
- Optical density (OD) is widely used to estimate the density of cells in liquid culture, but cannot be compared between instruments without a standardized calibration protocol and is challenging to relate to actual cell count. We address this with an interlaboratory study comparing three simple, low-cost, and highly accessible OD calibration protocols across 244 laboratories, applied to eight strains of constitutive GFP-expressing E. coli. Based on our results, we recommend calibrating OD to estimated cell count using serial dilution of silica microspheres, which produces highly precise calibration (95.5% of residuals <1.2-fold), is easily assessed for quality control, also assesses instrument effective linear range, and can be combined with fluorescence calibration to obtain units of Molecules of Equivalent Fluorescein (MEFL) per cell, allowing direct comparison and data fusion with flow cytometry measurements: in our study, fluorescence per cell measurements showed only a 1.07-fold mean difference between plate reader and flow cytometry data.
|
|
| 2. |
|
|
| 3. |
- Klionsky, Daniel J., et al.
(författare)
-
Guidelines for the use and interpretation of assays for monitoring autophagy
- 2012
-
Ingår i: Autophagy. - : Informa UK Limited. - 1554-8635 .- 1554-8627. ; 8:4, s. 445-544
-
Forskningsöversikt (refereegranskat)abstract
- In 2008 we published the first set of guidelines for standardizing research in autophagy. Since then, research on this topic has continued to accelerate, and many new scientists have entered the field. Our knowledge base and relevant new technologies have also been expanding. Accordingly, it is important to update these guidelines for monitoring autophagy in different organisms. Various reviews have described the range of assays that have been used for this purpose. Nevertheless, there continues to be confusion regarding acceptable methods to measure autophagy, especially in multicellular eukaryotes. A key point that needs to be emphasized is that there is a difference between measurements that monitor the numbers or volume of autophagic elements (e.g., autophagosomes or autolysosomes) at any stage of the autophagic process vs. those that measure flux through the autophagy pathway (i.e., the complete process); thus, a block in macroautophagy that results in autophagosome accumulation needs to be differentiated from stimuli that result in increased autophagic activity, defined as increased autophagy induction coupled with increased delivery to, and degradation within, lysosomes (in most higher eukaryotes and some protists such as Dictyostelium) or the vacuole (in plants and fungi). In other words, it is especially important that investigators new to the field understand that the appearance of more autophagosomes does not necessarily equate with more autophagy. In fact, in many cases, autophagosomes accumulate because of a block in trafficking to lysosomes without a concomitant change in autophagosome biogenesis, whereas an increase in autolysosomes may reflect a reduction in degradative activity. Here, we present a set of guidelines for the selection and interpretation of methods for use by investigators who aim to examine macroautophagy and related processes, as well as for reviewers who need to provide realistic and reasonable critiques of papers that are focused on these processes. These guidelines are not meant to be a formulaic set of rules, because the appropriate assays depend in part on the question being asked and the system being used. In addition, we emphasize that no individual assay is guaranteed to be the most appropriate one in every situation, and we strongly recommend the use of multiple assays to monitor autophagy. In these guidelines, we consider these various methods of assessing autophagy and what information can, or cannot, be obtained from them. Finally, by discussing the merits and limits of particular autophagy assays, we hope to encourage technical innovation in the field.
|
|
| 4. |
|
|
| 5. |
- Ariyawansa, Hiran A., et al.
(författare)
-
Fungal diversity notes 111–252—taxonomic and phylogenetic contributions to fungal taxa
- 2015
-
Ingår i: Fungal diversity. - : Springer Science and Business Media LLC. - 1560-2745 .- 1878-9129. ; 75, s. 27-274
-
Tidskriftsartikel (refereegranskat)abstract
- This paper is a compilation of notes on 142 fungal taxa, including five new families, 20 new genera, and 100 new species, representing a wide taxonomic and geographic range. The new families, Ascocylindricaceae, Caryosporaceae and Wicklowiaceae (Ascomycota) are introduced based on their distinct lineages and unique morphology. The new Dothideomycete genera Pseudomassariosphaeria (Amniculicolaceae), Heracleicola, Neodidymella and P s e u d o m i c ros p h a e r i o p s i s ( D id y m e l l a c e a e ) , P s e u d o p i t h o m y c e s ( D i d y m o s p h a e r i a c e a e ) , Brunneoclavispora, Neolophiostoma and Sulcosporium (Halotthiaceae), Lophiohelichrysum (Lophiostomataceae), G a l l i i c o l a , Popul o c re s c e n t i a a nd Va g i c o l a (Phaeosphaeriaceae), Ascocylindrica (Ascocylindricaceae), E l o n g a t o p e d i c e l l a t a ( R o u s s o e l l a c e a e ) , Pseudoasteromassaria (Latoruaceae) and Pseudomonodictys (Macrodiplodiopsidaceae) are introduced. The newly described species of Dothideomycetes (Ascomycota) are Pseudomassariosphaeria bromicola (Amniculicolaceae), Flammeascoma lignicola (Anteagloniaceae), Ascocylindrica marina (Ascocylindricaceae) , Lembosia xyliae (Asterinaceae), Diplodia crataegicola and Diplodia galiicola ( B o t r yosphae r i a cea e ) , Caryospor a aquat i c a (Caryosporaceae), Heracleicola premilcurensis and Neodi dymell a thai landi cum (Didymellaceae) , Pseudopithomyces palmicola (Didymosphaeriaceae), Floricola viticola (Floricolaceae), Brunneoclavispora bambusae, Neolophiostoma pigmentatum and Sulcosporium thailandica (Halotthiaceae), Pseudoasteromassaria fagi (Latoruaceae), Keissleriella dactylidicola (Lentitheciaceae), Lophiohelichrysum helichrysi (Lophiostomataceae), Aquasubmersa japonica (Lophiotremataceae) , Pseudomonodictys tectonae (Macrodiplodiopsidaceae), Microthyrium buxicola and Tumidispora shoreae (Microthyriaceae), Alloleptosphaeria clematidis, Allophaeosphaer i a c y t i s i , Allophaeosphae r i a subcylindrospora, Dematiopleospora luzulae, Entodesmium artemisiae, Galiicola pseudophaeosphaeria, Loratospora(Basidiomycota) are introduced together with a new genus Neoantrodiella (Neoantrodiellaceae), here based on both morphology coupled with molecular data. In the class Agaricomycetes, Agaricus pseudolangei, Agaricus haematinus, Agaricus atrodiscus and Agaricus exilissimus (Agaricaceae) , Amanita m e l l e i a l b a , Amanita pseudosychnopyramis and Amanita subparvipantherina (Amanitaceae), Entoloma calabrum, Cora barbulata, Dictyonema gomezianum and Inocybe granulosa (Inocybaceae), Xerocomellus sarnarii (Boletaceae), Cantharellus eucalyptorum, Cantharellus nigrescens, Cantharellus tricolor and Cantharellus variabilicolor (Cantharellaceae), Cortinarius alboamarescens, Cortinarius brunneoalbus, Cortinarius ochroamarus, Cortinarius putorius and Cortinarius seidlii (Cortinariaceae), Hymenochaete micropora and Hymenochaete subporioides (Hymenochaetaceae), Xylodon ramicida (Schizoporaceae), Colospora andalasii (Polyporaceae), Russula guangxiensis and Russula hakkae (Russulaceae), Tremella dirinariae, Tremella graphidis and Tremella pyrenulae (Tremellaceae) are introduced. Four new combinations Neoantrodiella gypsea, Neoantrodiella thujae (Neoantrodiellaceae), Punctulariopsis cremeoalbida, Punctulariopsis efibulata (Punctulariaceae) are also introduced here for the division Basidiomycota. Furthermore Absidia caatinguensis, Absidia koreana and Gongronella koreana (Cunninghamellaceae), Mortierella pisiformis and Mortierella formosana (Mortierellaceae) are newly introduced in the Zygomycota, while Neocallimastix cameroonii and Piromyces irregularis (Neocallimastigaceae) ar e i n t roduced i n the Neocallimastigomycota. Reference specimens or changes in classification and notes are provided for Alternaria ethzedia, Cucurbitaria ephedricola, Austropleospora, Austropleospora archidendri, Byssosphaeria rhodomphala, Lophiostoma caulium, Pseudopithomyces maydicus, Massariosphaeria, Neomassariosphaeria and Pestalotiopsis montellica.
|
|
| 6. |
|
|
| 7. |
- Luo, Yifei, et al.
(författare)
-
Technology Roadmap for Flexible Sensors
- 2023
-
Ingår i: ACS Nano. - : American Chemical Society. - 1936-0851 .- 1936-086X. ; 17:6, s. 5211-5295
-
Forskningsöversikt (refereegranskat)abstract
- Humans rely increasingly on sensors to address grand challenges and to improve quality of life in the era of digitalization and big data. For ubiquitous sensing, flexible sensors are developed to overcome the limitations of conventional rigid counterparts. Despite rapid advancement in bench-side research over the last decade, the market adoption of flexible sensors remains limited. To ease and to expedite their deployment, here, we identify bottlenecks hindering the maturation of flexible sensors and propose promising solutions. We first analyze challenges in achieving satisfactory sensing performance for real-world applications and then summarize issues in compatible sensor-biology interfaces, followed by brief discussions on powering and connecting sensor networks. Issues en route to commercialization and for sustainable growth of the sector are also analyzed, highlighting environmental concerns and emphasizing nontechnical issues such as business, regulatory, and ethical considerations. Additionally, we look at future intelligent flexible sensors. In proposing a comprehensive roadmap, we hope to steer research efforts towards common goals and to guide coordinated development strategies from disparate communities. Through such collaborative efforts, scientific breakthroughs can be made sooner and capitalized for the betterment of humanity.
|
|
| 8. |
- Darwich, Adam S., et al.
(författare)
-
IMI - Oral biopharmaceutics tools project - Evaluation of bottom-up PBPK prediction success part 3 : Identifying gaps in system parameters by analysing In Silico performance across different compound classes
- 2017
-
Ingår i: European Journal of Pharmaceutical Sciences. - : Elsevier BV. - 0928-0987 .- 1879-0720. ; 96, s. 626-642
-
Tidskriftsartikel (refereegranskat)abstract
- Three Physiologically Based Pharmacokinetic software packages (GI-Sim, Simcyp (R) Simulator, and GastroPlus (TM)) were evaluated as part of the Innovative Medicine Initiative Oral Biopharmaceutics Tools project (OrBiTo) during a blinded "bottom-up" anticipation of human pharmacokinetics. After data analysis of the predicted vs. measured pharmacokinetics parameters, it was found that oral bioavailability (F-oral) was underpredicted for compounds with low permeability, suggesting improper estimates of intestinal surface area, colonic absorption and/or lack of intestinal transporter information. Foralwas also underpredicted for acidic compounds, suggesting overestimation of impact of ionisation on permeation, lack of information on intestinal transporters, or underestimation of solubilisation of weak acids due to less than optimal intestinal model pH settings or underestimation of bile micelle contribution. F-oral was overpredicted for weak bases, suggesting inadequate models for precipitation or lack of in vitro precipitation information to build informed models. Relative bioavailability was underpredicted for both high logP compounds as well as poorly water-soluble compounds, suggesting inadequate models for solubility/dissolution, underperforming bile enhancement models and/or lack of biorelevant solubility measurements. These results indicate areas for improvement in model software, modelling approaches, and generation of applicable input data. However, caution is required when interpreting the impact of drug-specific properties in this exercise, as the availability of input parameters was heterogeneous and highly variable, and the modellers generally used the data "as is" in this blinded bottom-up prediction approach.
|
|
| 9. |
- Dely, H., et al.
(författare)
-
High bitrate data transmission in the 8-14 µm atmospheric window using an external Stark-effect modulator with digital equalization
- 2023
-
Ingår i: Optics Express. - : Optica Publishing Group (formerly OSA). - 1094-4087. ; 31:5, s. 7259-7264
-
Tidskriftsartikel (refereegranskat)abstract
- High bitrate mid-infrared links using simple (NRZ) and multi-level (PAM-4) data coding schemes have been realized in the 8 µm to 14 µm atmospheric transparency window. The free space optics system is composed of unipolar quantum optoelectronic devices, namely a continuous wave quantum cascade laser, an external Stark-effect modulator and a quantum cascade detector, all operating at room-temperature. Pre- and post-processing are implemented to get enhanced bitrates, especially for PAM-4 where inter-symbol interference and noise are particularly detrimental to symbol demodulation. By exploiting these equalization procedures, our system, with a full frequency cutoff of 2 GHz, has reached transmission bitrates of 12 Gbit/s NRZ and 11 Gbit/s PAM-4 fulfilling the 6.25 % overhead hard-decision forward error correction threshold, limited only by the low signal-to-noise ratio of our detector.
|
|
| 10. |
- Duan, Chunhui, et al.
(författare)
-
Improving Performance of All-Polymer Solar Cells Through Backbone Engineering of Both Donors and Acceptors
- 2018
-
Ingår i: Solar RRL. - : Wiley. - 2367-198X. ; 2:12
-
Tidskriftsartikel (refereegranskat)abstract
- All-polymer solar cells (APSCs), composed of semiconducting donor and acceptor polymers, have attracted considerable attention due to their unique advantages compared to polymer-fullerene-based devices in terms of enhanced light absorption and morphological stability. To improve the performance of APSCs, the morphology of the active layer must be optimized. By employing a random copolymerization strategy to control the regularity of the backbone of the donor polymers (PTAZ-TPDx) and acceptor polymers (PNDI-Tx) the morphology can be systematically optimized by tuning the polymer packing and crystallinity. To minimize effects of molecular weight, both donor and acceptor polymers have number-average molecular weights in narrow ranges. Experimental and coarse-grained modeling results disclose that systematic backbone engineering greatly affects the polymer crystallinity and ultimately the phase separation and morphology of the all-polymer blends. Decreasing the backbone regularity of either the donor or the acceptor polymer reduces the local crystallinity of the individual phase in blend films, affording reduced short-circuit current densities and fill factors. This two-dimensional crystallinity optimization strategy locates a PCE maximum at highest crystallinity for both donor and acceptor polymers. Overall, this study demonstrates that proper control of both donor and acceptor polymer crystallinity simultaneously is essential to optimize APSC performance.
|
|
