1. |
- Beal, Jacob, et al.
(författare)
-
Robust estimation of bacterial cell count from optical density
- 2020
-
Ingår i: Communications Biology. - : Springer Science and Business Media LLC. - 2399-3642. ; 3:1
-
Tidskriftsartikel (refereegranskat)abstract
- Optical density (OD) is widely used to estimate the density of cells in liquid culture, but cannot be compared between instruments without a standardized calibration protocol and is challenging to relate to actual cell count. We address this with an interlaboratory study comparing three simple, low-cost, and highly accessible OD calibration protocols across 244 laboratories, applied to eight strains of constitutive GFP-expressing E. coli. Based on our results, we recommend calibrating OD to estimated cell count using serial dilution of silica microspheres, which produces highly precise calibration (95.5% of residuals <1.2-fold), is easily assessed for quality control, also assesses instrument effective linear range, and can be combined with fluorescence calibration to obtain units of Molecules of Equivalent Fluorescein (MEFL) per cell, allowing direct comparison and data fusion with flow cytometry measurements: in our study, fluorescence per cell measurements showed only a 1.07-fold mean difference between plate reader and flow cytometry data.
|
|
2. |
- Luo, Yifei, et al.
(författare)
-
Technology Roadmap for Flexible Sensors
- 2023
-
Ingår i: ACS Nano. - : American Chemical Society. - 1936-0851 .- 1936-086X. ; 17:6, s. 5211-5295
-
Forskningsöversikt (refereegranskat)abstract
- Humans rely increasingly on sensors to address grand challenges and to improve quality of life in the era of digitalization and big data. For ubiquitous sensing, flexible sensors are developed to overcome the limitations of conventional rigid counterparts. Despite rapid advancement in bench-side research over the last decade, the market adoption of flexible sensors remains limited. To ease and to expedite their deployment, here, we identify bottlenecks hindering the maturation of flexible sensors and propose promising solutions. We first analyze challenges in achieving satisfactory sensing performance for real-world applications and then summarize issues in compatible sensor-biology interfaces, followed by brief discussions on powering and connecting sensor networks. Issues en route to commercialization and for sustainable growth of the sector are also analyzed, highlighting environmental concerns and emphasizing nontechnical issues such as business, regulatory, and ethical considerations. Additionally, we look at future intelligent flexible sensors. In proposing a comprehensive roadmap, we hope to steer research efforts towards common goals and to guide coordinated development strategies from disparate communities. Through such collaborative efforts, scientific breakthroughs can be made sooner and capitalized for the betterment of humanity.
|
|
3. |
- Bao, Zijia, et al.
(författare)
-
A bimetallic 3D interconnected metal–organic framework with 2D morphology and its derived electrocatalyst for oxygen reduction
- 2023
-
Ingår i: CrystEngComm. - : Royal Society of Chemistry (RSC). - 1466-8033. ; 25:13, s. 1869-1873
-
Tidskriftsartikel (refereegranskat)abstract
- Metal–organic frameworks (MOFs) are widely used as precursors to generate derivatives for electrocatalysis. However, two-dimensional (2D) MOFs often suffer from the collapse of their 2D structures after being treated at high temperature. Herein, we used the dense ZIF-EC1 as a precursor and doped Co as a secondary metal. The content of Co in ZIF-EC1 can be tuned without changing the crystalline structure. After pyrolysis, the derived carbon-based material maintains the 2D morphology from the parental precursor. The derived ZIF-EC1(ZnCo)-20-900 exhibits the best activity toward the ORR, which is even better than that of Pt/C. This work demonstrates the potential of using a nonporous dense MOF as a precursor and optimizing electrocatalytic ORR activity by tuning the Co content.
|
|
4. |
- Fan, Qunping, 1989, et al.
(författare)
-
Over 14% efficiency all-polymer solar cells enabled by a low bandgap polymer acceptor with low energy loss and efficient charge separation
- 2020
-
Ingår i: Energy & Environmental Science. - : Royal Society of Chemistry. - 1754-5692 .- 1754-5706. ; 13:12, s. 5017-5027
-
Tidskriftsartikel (refereegranskat)abstract
- Obtaining both high open-circuit voltage (V-oc) and short-circuit current density (J(sc)) has been a major challenge for efficient all-polymer solar cells (all-PSCs). Herein, we developed a polymer acceptor PF5-Y5 with excellent optical absorption capability (onset extending to similar to 880 nm and maximum absorption coefficient exceeding 105 cm(-1) in a film), high electron mobility (3.18 x 10(3) cm(2) V-1 s(-1)) and high LUMO level (-3.84 eV) to address such a challenge. As a result, the PBDB-T:PF5-Y5-based all-PSCs achieved a high power conversion efficiency of up to 14.45% with both a high Voc (0.946 V) and a high Jsc (20.65 mA cm(-2)), due to the high and broad absorption coverage, small energy loss (0.57 eV) and efficient charge separation and transport in the device, which are among the best values in the all-PSC field. In addition, the all-PSC shows a similar to 15% improvement in PCE compared to its counterpart small molecule acceptor (Y5)-based device. Our results suggest that PF5-Y5 is a very promising polymer acceptor candidate for applications in efficient all-PSCs.
|
|
5. |
- Li, Yongxi, et al.
(författare)
-
Non-fullerene acceptor with low energy loss and high external quantum efficiency: towards high performance polymer solar cells
- 2016
-
Ingår i: Journal of Materials Chemistry A. - : Royal Society of Chemistry. - 2050-7488 .- 2050-7496. ; 4:16, s. 5890-5897
-
Tidskriftsartikel (refereegranskat)abstract
- A non-fullerene electron acceptor bearing a fused 10-heterocyclic ring (indacenodithiophenoindacenodithiophene) with a narrow band gap (similar to 1.5 eV) was designed and synthesized. It possesses excellent planarity and enhanced effective conjugation length compared to previously reported fused-ring electron acceptors. When this acceptor was paired with PTB7-Th and applied in polymer solar cells, a power conversion efficiency of 6.5% was achieved with a high open circuit voltage of 0.94 V. More significantly, an energy loss as low as 0.59 eV and an external quantum efficiency as high as 63% were obtained simultaneously.
|
|
6. |
- Pan, Wenwu, et al.
(författare)
-
Photoluminescence of InGaAs/GaAsBi/InGaAs type-II quantum wells grown by gas source molecular beam epitaxy
- 2017
-
Ingår i: Semiconductor Science and Technology. - : IOP Publishing. - 1361-6641 .- 0268-1242. ; 32:1
-
Tidskriftsartikel (refereegranskat)abstract
- InxGa1-xAs/GaAs1-yBiy/InxGa1-xAs (0.20 ≤x ≤0.22, 0.035 ≤y ≤0.045) quantum wells (QWs) were grown on GaAs substrates by gas source molecular beam epitaxy for realizing the type-II band edge line-up. Both type-I and type-II transitions were observed in the Bi containing W QWs and the photoluminescence intensity was enhanced in the sample with a high Bi content, which is mainly due to the improvement of carrier confinement. The 8 band k • p model was used to analyze the electronic properties in the QWs and the calculated transition energies fit well with the experiment results. Our study shows that the proposed type-II QW is a promising candidate for realizing GaAs-based near infrared light emitting devices near 1.3 μm
|
|
7. |
- Peng, Zuosheng, et al.
(författare)
-
A dual ternary system for highly efficient ITO-free inverted polymer solar cells
- 2015
-
Ingår i: Journal of Materials Chemistry A. - : Royal Society of Chemistry. - 2050-7488 .- 2050-7496. ; 3:36, s. 18365-18371
-
Tidskriftsartikel (refereegranskat)abstract
- In this study, it has been found that a very fine nanostructure can be realized by mixing 1-chloronaphthalene (CN) - a high-boiling solvent into a binary chlorobenzene (CB) : 1,8-diiodooctane (DIO) solvent mixture to form a ternary solvent system. An improvement in energy level alignment is also obtained by doping ICBA into a binary PTB7 : PCBM[70] blend, whereby the ternary solute system provides a new pathway for charge transfer from PTB7 to the PCBM[ 70] : ICBA alloy. This is confirmed by imaging the surface morphology of the active layer using AFM and TEM, monitoring the transient film formation process and measuring the charge transfer states with Fourier transform photocurrent spectroscopy. An encouraging PCE of 7.65% is achieved from the dual ternary system, which is the highest value ever reported for an ITO-free inverted polymer solar cell with a PEDOT:PSS layer as the top semitransparent electrode - a system which is compatible with low-cost large-area roll-to-roll manufacturing.
|
|
8. |
- Peng, Zuosheng, et al.
(författare)
-
One-step coating inverted polymer solar cells using a conjugated polymer as an electron extraction additive
- 2015
-
Ingår i: Journal of Materials Chemistry A. - : ROYAL SOC CHEMISTRY. - 2050-7488 .- 2050-7496. ; 3:41, s. 20500-20507
-
Tidskriftsartikel (refereegranskat)abstract
- We report a facile technique of blending a conjugated polymer thieno[3,4-b]thiophene/benzodithiophene (PTB7):[6,6]-phenyl-C71-butyric acid methyl ester (PCBM[70]) active materials with a conjugated interfacial modification polymer poly[(9,9-bis(3-(N,N-dimethylamino)propyl)-2,7-fluorene)-alt-2,7-(9,9-dioctylfluorene)] (PFN) to simplify the coating process and improve the bulk heterojunction (BHJ) polymer solar cell (PSC) performance. The reason for and result of PFN self-organization via a spontaneous vertical delamination onto the ITO surface were investigated by charge transfer state, optical modelling based on transfer matrix formalism, surface energy measurement, scanning Kelvin probe force microscopy and impedance spectroscopy analysis in conjunction with atomic force microscopy and scanning electron microscopy. The relaxed charge transfer state demonstrates that PFN doping has a negligible impact on the donor: acceptor heterojunction interface. The optical simulation of device structures indicates that doping PFN into a BHJ has nearly no influence on the photon absorption profile of the active layer. Very encouraging device performance was achieved in the one-step coating PFN: BHJ PSC with ITO as the cathode, which is comparable to that of the two-step coating PSC. Moreover, for ITO-free inverted PSCs with PEDOT:PSS as the incident light top-electrode, decent device performance can also be obtained, demonstrating the remarkable universality through this facile strategy.
|
|