| 1. |
- Ekblom Bak, Elin, 1981-, et al.
(författare)
-
Accelerometer derived physical activity and subclinical coronary and carotid atherosclerosis : cross-sectional analyses in 22 703 middle-aged men and women in the SCAPIS study
- 2023
-
Ingår i: BMJ Open. - : BMJ Publishing Group Ltd. - 2044-6055. ; 13:11
-
Tidskriftsartikel (refereegranskat)abstract
- OBJECTIVES: The aim included investigation of the associations between sedentary (SED), low-intensity physical activity (LIPA), moderate-to-vigorous intensity PA (MVPA) and the prevalence of subclinical atherosclerosis in both coronaries and carotids and the estimated difference in prevalence by theoretical reallocation of time in different PA behaviours.DESIGN: Cross-sectional.SETTING: Multisite study at university hospitals.PARTICIPANTS: A total of 22 670 participants without cardiovascular disease (51% women, 57.4 years, SD 4.3) from the population-based Swedish CArdioPulmonary bioImage study were included. SED, LIPA and MVPA were assessed by hip-worn accelerometer.PRIMARY AND SECONDARY OUTCOMES: Any and significant subclinical coronary atherosclerosis (CA), Coronary Artery Calcium Score (CACS) and carotid atherosclerosis (CarA) were derived from imaging data from coronary CT angiography and carotid ultrasound.RESULTS: High daily SED (>70% ≈10.5 hours/day) associated with a higher OR 1.44 (95% CI 1.09 to 1.91), for significant CA, and with lower OR 0.77 (95% CI 0.63 to 0.95), for significant CarA. High LIPA (>55% ≈8 hours/day) associated with lower OR for significant CA 0.70 (95% CI 0.51 to 0.96), and CACS, 0.71 (95% CI 0.51 to 0.97), but with higher OR for CarA 1.41 (95% CI 1.12 to 1.76). MVPA above reference level, >2% ≈20 min/day, associated with lower OR for significant CA (OR range 0.61-0.67), CACS (OR range 0.71-0.75) and CarA (OR range 0.72-0.79). Theoretical replacement of 30 min of SED into an equal amount of MVPA associated with lower OR for significant CA, especially in participants with high SED 0.84 (95% CI 0.76 to 0.96) or low MVPA 0.51 (0.36 to 0.73).CONCLUSIONS: MVPA was associated with a lower risk for significant atherosclerosis in both coronaries and carotids, while the association varied in strength and direction for SED and LIPA, respectively. If causal, clinical implications include avoiding high levels of daily SED and low levels of MVPA to reduce the risk of developing significant subclinical atherosclerosis.
|
|
| 2. |
|
|
| 3. |
|
|
| 4. |
|
|
| 5. |
- Eriksson, Daniel, 1987-, et al.
(författare)
-
Evaluating the use of a tactile sensor for measuring carton compliance
- 2020
-
Ingår i: Nordic Pulp & Paper Research Journal. - : Walter de Gruyter. - 0283-2631 .- 2000-0669. ; 35:3, s. 362-369
-
Tidskriftsartikel (refereegranskat)abstract
- This work reports the evaluation of a tactile sensor for the potential of using it to measure the compliance of folding cartons. A tactile sensor would make it possible to measure the mechanical behavior locally around the contact point, in contrast to existing methods that measure the global mechanical behavior of the carton. Research on the haptic sense has shown that the local mechanical behavior is more important than the global behavior when humans assess compliance of objects. It is shown that the response of the tactile sensor correlates strongly with the bending stiffness of the board, but also with geometric features. A method for reducing the 22-dimensional output of the sensor to single meaningful feature using linear discriminant analysis is proposed and tested. The results show that the sensor is a good candidate for a method that incorporates both cutaneous and kinaesthetic information in the measure of carton compliance.
|
|
| 6. |
- Eriksson, Daniel, 1987-, et al.
(författare)
-
Laboratory measurement method for the mechanical interaction between a tactile sensor and a cartonboard package – presentation and evaluation
- 2021
-
Ingår i: Nordic Pulp & Paper Research Journal. - : Walter de Gruyter. - 0283-2631 .- 2000-0669. ; 36:1, s. 91-99
-
Tidskriftsartikel (refereegranskat)abstract
- The importance of sensory information in product purchasing decisions has gained increasing attention in recent years. Tactile properties of packaging are usually measured with the help of trained evaluators. An objective, fast and repeatable method that describes the mechanical interaction and does not rely on a panel would have many benefits. We propose and evaluate such a method for measuring the mechanical interaction between a deformable finger-like shaped sensor and a package. Evaluation of the method shows good repeatability, the variability in the measurement result is within a few percent in most cases. The method captures indentation differences at contact between sensor and package due to measurement position and package design.
|
|
| 7. |
|
|
| 8. |
|
|
| 9. |
- Fröling, Morgan, et al.
(författare)
-
Life cycle assessment of the district heat distribution system - Part 1 : Pipe production
- 2004
-
Ingår i: The International Journal of Life Cycle Assessment. - : Springer. - 0948-3349 .- 1614-7502. ; 9:2, s. 130-136
-
Tidskriftsartikel (refereegranskat)abstract
- Goal, Scope and Background: District heating, the utilization of centrally produced heat for space heating and domestic hot water generation, has the potential to contribute to the eco-efficient use of energy resources in the parts of the world where space heating is needed. In literature, environmental studies on district heating mainly consider the emissions from heat generation; the environmental impact from the distribution system is seldom discussed. This paper presents a life cycle assessment of the production of district heating pipes, based on a cradle-to-gate life cycle inventory commissioned by the Swedish District Heating Association. No external review has been performed but a reference group of district heating experts familiar with the practice was involved in the choice of cases as well as in reviewing parts of the study.Methods: Manufacturing of district heating pipes at Powerpipe Systems AB, Goteborg, Sweden, was studied. Prefabricated polyurethane insulated district heating pipes were considered, with a steel tube and a protective casing made of high-density polyethylene. Production of pipes during the time period 1999-2000 was investigated. The functional unit used in the study is production of one district heating pipe unit. The studied pipes are: a twin pipe of the dimension DN25 (12m long) and single pipes of the dimensions DN25 (12m), DN100 (12m) and DN500 (16m).Results and Discussion: A short description of the inventory, some inventory results and a life cycle impact assessment are presented. Characterizations according to GWP, AP, POCP and resource depletion are given as well as two weightings: Ecolndicator99 and Ecoscarcity. If the life cycle is grouped into 'Materials production', 'Transports', 'Manufacturing' and 'Waste management', the 'Materials production' gives rise to a dominating part of the environmental impact.Recommendation and Perspective: To use materials in the pipes as efficiently as possible is the most important feature in order to reduce the environmental impact from production of district heating pipes. Twin pipes can be a more material efficient solution than single pipes. It is important to make sure that environmental improvements from changes in the pipe production phase are not offset by other effects in the total life cycle of the district heating pipe.
|
|
| 10. |
|
|
