| 1. |
- Engström, Gunnar, et al.
(författare)
-
Pulmonary function and atherosclerosis in the general population : causal associations and clinical implications
- 2024
-
Ingår i: European Journal of Epidemiology. - : Springer Nature. - 0393-2990 .- 1573-7284. ; 39:1, s. 35-49
-
Tidskriftsartikel (refereegranskat)abstract
- Reduced lung function is associated with cardiovascular mortality, but the relationships with atherosclerosis are unclear. The population-based Swedish CArdioPulmonary BioImage study measured lung function, emphysema, coronary CT angiography, coronary calcium, carotid plaques and ankle-brachial index in 29,593 men and women aged 50–64 years. The results were confirmed using 2-sample Mendelian randomization. Lower lung function and emphysema were associated with more atherosclerosis, but these relationships were attenuated after adjustment for cardiovascular risk factors. Lung function was not associated with coronary atherosclerosis in 14,524 never-smokers. No potentially causal effect of lung function on atherosclerosis, or vice versa, was found in the 2-sample Mendelian randomization analysis. Here we show that reduced lung function and atherosclerosis are correlated in the population, but probably not causally related. Assessing lung function in addition to conventional cardiovascular risk factors to gauge risk of subclinical atherosclerosis is probably not meaningful, but low lung function found by chance should alert for atherosclerosis.
|
|
| 2. |
- Gogova, Daniela, 1967-, et al.
(författare)
-
Epitaxial growth of β-Ga2O3 by hot-wall MOCVD
- 2022
-
Ingår i: AIP Advances. - : AIP Publishing. - 2158-3226. ; 12:5
-
Tidskriftsartikel (refereegranskat)abstract
- The hot-wall metalorganic chemical vapor deposition (MOCVD) concept, previously shown to enable superior material quality and high performance devices based on wide bandgap semiconductors, such as Ga(Al)N and SiC, has been applied to the epitaxial growth of beta-Ga2O3. Epitaxial beta-Ga2O3 layers at high growth rates (above 1 mu m/h), at low reagent flows, and at reduced growth temperatures (740 degrees C) are demonstrated. A high crystalline quality epitaxial material on a c-plane sapphire substrate is attained as corroborated by a combination of x-ray diffraction, high-resolution scanning transmission electron microscopy, and spectroscopic ellipsometry measurements. The hot-wall MOCVD process is transferred to homoepitaxy, and single-crystalline homoepitaxial beta-Ga2O3 layers are demonstrated with a 201 rocking curve width of 118 arc sec, which is comparable to those of the edge-defined film-fed grown (201) beta-Ga2O3 substrates, indicative of similar dislocation densities for epilayers and substrates. Hence, hot-wall MOCVD is proposed as a prospective growth method to be further explored for the fabrication of beta-Ga2O3.
|
|
| 3. |
- Hsiao, Ching-Lien, et al.
(författare)
-
Spontaneous Formation of AlInN Core–Shell Nanorod Arrays by Ultrahigh-Vacuum Magnetron Sputter Epitaxy
- 2011
-
Ingår i: Applied Physics Express. - : Japan Society of Applied Physics. - 1882-0786. ; 4:115002
-
Tidskriftsartikel (refereegranskat)abstract
- The spontaneous formation of AlInN core–shell nanorod arrays with variable In concentration has been realized by ultrahigh-vacuum magnetron sputter epitaxy with Ti0.21Zr0.79N or VN seed layer assistance. The nanorods exhibit hexagonal cross sections with preferential growth along the c-axis. A core–shell rod structure with a higher In concentration in the core was observed by (scanning) transmission electron microscopy in combination with low-loss electron energy loss spectroscopy and energy dispersive X-ray spectroscopy. 5 K cathodoluminescence spectroscopy of Al0.86In0.14N nanorods revealed band edge emission at ∼5.46 eV, which was accompanied by a strong defect-related emission at ∼3.38 eV
|
|
| 4. |
- Lu, Jun, 1962-, et al.
(författare)
-
Tin+1Cn MXenes with fully saturated and thermally stable Cl terminations
- 2019
-
Ingår i: Nanoscale Advances. - : Royal Society of Chemistry. - 2516-0230. ; 1:9, s. 3680-3685
-
Tidskriftsartikel (refereegranskat)abstract
- MXenes are a rapidly growing family of 2D materials that exhibit a highly versatile structure and composition, allowing for significant tuning of the materials properties. These properties are, however, ultimately limited by the surface terminations, which are typically a mixture of species, including F and O that are inherent to the MXene processing. Other and robust terminations are lacking. Here, we apply high-resolution scanning transmission electron microscopy (STEM), corresponding image simulations and first-principles calculations to investigate the surface terminations on MXenes synthesized from MAX phases through Lewis acidic melts. The results show that atomic Cl terminates the synthesized MXenes, with mere residual presence of other termination species. Furthermore, in situ STEM-electron energy loss spectroscopy (EELS) heating experiments show that the Cl terminations are stable up to 750 degrees C. Thus, we present an attractive new termination that widely expands the MXenes functionalization space and enables new applications.
|
|
| 5. |
- Persson, Ingemar, 1985-
(författare)
-
Surface characterization of 2D transition metal carbides (MXenes)
- 2019
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Research on two-dimensional (2D) materials is a rapidly growing field owing to the wide range of new interesting properties found in 2D structures that are vastly different from their three-dimensional (3D) analogues. In addition, 2D materials embodies a significant surface area that facilitates a high degree of surface reactions per unit volume or mass, that is imperative in many applications such as catalysis, energy storage, energy conversion, filtration, and single molecule sensing. MXenes constitute a family of 2D materials consisting of transition metal carbides and/or nitrides, which are typically formed after selective etching of their 3D parent MAX phases. The latter, are a family of nanolaminated compounds that typically follow the formula Mn+1AXn (n=1-3), where M is a transition metal, A is a group 13 or 14 element, and X is C and or N. Selective etching by aqueous F- containing acids removes the A layer leaving 2D Mn+1Xn slabs instantly terminated by a mix of O-, OH- and F-groups. The first and most investigated MXene is Ti3C2TX, where TX stands for surface termination, which has shown record properties in a range of applications (eg. electrode in Li-batteries, supercapacitors, sieving membrane, electromagnetic interference shielding, and carbon capture). Adding to that, over 30 different MXenes have been discovered since 2011, exhibiting alternative or superior properties. Most importantly, elegant routes for property design in the MXene family has been demonstrated, by means of either varying the chemistry in the Mn+1Xn compound, by alloying two M elements, or by changing the structure of the MXene by introducing vacancies.The present work has a led to an additional route for post synthesis property tuning in MXenes by manipulation of surface termination elements. This enables a unique toolbox for property tuning which is not available to other 2D materials and is highly beneficial for applications that is dependent on surface reactions. Furthermore, chemical and structural characterization of terminations on single sheets is essential to rule out the influence of intercalants or contamination that is typically present in multilayer MXene samples or thin films. For that purpose, a method for preparing isolated contamination free single sheets of MXene samples for transmission electron microscopy (TEM) characterization was established. In order to determine vacancy and termination sites, atomically resolved scanning (S)TEM imaging and image simulations was carried out. Two main processes were employed to substitute the termination elements.1) An initial thermal treatment in vacuum facilitates F desorption and it was shown that O-terminations rearranges on the evacuated sites. H2 gas exposure in a controlled environment demonstrated a removal of the remaining O-terminations. As a result, termination-free MXene is possible to realize under vacuum conditions.2) CO2 was introduced as a first non-inherent termination on MXene by in situ CO2 gas exposure at low temperatures. That was a first demonstration of Ti3C2TX as promising material for carbon capture. Additionally, O-saturated surfaces were demonstrated after introduction of O2 gas on the F-depleted Ti3C2TX MXene, which is highly relevant for hydrogen evolution reactions where fully O-terminated Ti3C2TX are predicted to improve efficiency.A Lewis acid melt synthesis method was used to realize the first MXene exclusively terminated with Cl. Moreover, this was the first report of a MXene directly synthesised with terminations other than O, OH, and F.Furthermore, we have expanded the space of property tuning by introduction of chemical ordering, by selective etching of Y in an alloyed (Mo2/3Y1/3)2CTX MXene. This either produced chemical ordering with one M (Mo) element and vacancies, or ordering between two M (Mo and Y) elements. This was further reported to significantly increase volumetric capacitance because of the increased number of active sites around vacancies, leading to an increasing charge density. As a final note, the stability of Nb2CTX MXene under ambient conditions was investigated. It was found that the surface Nb adatoms, present after etching, got oxidized over time which resulted in local clustering and effectively degraded the MXene.This work has demonstrated reproducible surface characterization methods for determining termination elements and sites in 2D MXenes, that is ultimately governing MXene properties. Most importantly, we report on a new approach for MXene property tuning as well as contributing to several existing property tuning approaches.
|
|
| 6. |
- Bergström, Göran, 1964, et al.
(författare)
-
Prevalence of Subclinical Coronary Artery Atherosclerosis in the General Population
- 2021
-
Ingår i: Circulation. - Philadelphia : American Heart Association. - 0009-7322 .- 1524-4539. ; 144:12, s. 916-929
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Early detection of coronary atherosclerosis using coronary computed tomography angiography (CCTA), in addition to coronary artery calcification (CAC) scoring, may help inform prevention strategies. We used CCTA to determine the prevalence, severity, and characteristics of coronary atherosclerosis and its association with CAC scores in a general population.Methods: We recruited 30 154 randomly invited individuals age 50 to 64 years to SCAPIS (the Swedish Cardiopulmonary Bioimage Study). The study includes individuals without known coronary heart disease (ie, no previous myocardial infarctions or cardiac procedures) and with high-quality results from CCTA and CAC imaging performed using dedicated dual-source CT scanners. Noncontrast images were scored for CAC. CCTA images were visually read and scored for coronary atherosclerosis per segment (defined as no atherosclerosis, 1% to 49% stenosis, or ≥50% stenosis). External validity of prevalence estimates was evaluated using inverse probability for participation weighting and Swedish register data.Results: In total, 25 182 individuals without known coronary heart disease were included (50.6% women). Any CCTA-detected atherosclerosis was found in 42.1%; any significant stenosis (≥50%) in 5.2%; left main, proximal left anterior descending artery, or 3-vessel disease in 1.9%; and any noncalcified plaques in 8.3% of this population. Onset of atherosclerosis was delayed on average by 10 years in women. Atherosclerosis was more prevalent in older individuals and predominantly found in the proximal left anterior descending artery. Prevalence of CCTA-detected atherosclerosis increased with increasing CAC scores. Among those with a CAC score >400, all had atherosclerosis and 45.7% had significant stenosis. In those with 0 CAC, 5.5% had atherosclerosis and 0.4% had significant stenosis. In participants with 0 CAC and intermediate 10-year risk of atherosclerotic cardiovascular disease according to the pooled cohort equation, 9.2% had CCTA-verified atherosclerosis. Prevalence estimates had excellent external validity and changed marginally when adjusted to the age-matched Swedish background population.Conclusions: Using CCTA in a large, random sample of the general population without established disease, we showed that silent coronary atherosclerosis is common in this population. High CAC scores convey a significant probability of substantial stenosis, and 0 CAC does not exclude atherosclerosis, particularly in those at higher baseline risk.
|
|
| 7. |
- Bergström, Göran, et al.
(författare)
-
Prevalence of Subclinical Coronary Artery Atherosclerosis in the General Population
- 2021
-
Ingår i: Circulation. - : Wolters Kluwer. - 0009-7322 .- 1524-4539. ; 144:12, s. 916-929
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Early detection of coronary atherosclerosis using coronary computed tomography angiography (CCTA), in addition to coronary artery calcification (CAC) scoring, may help inform prevention strategies. We used CCTA to determine the prevalence, severity, and characteristics of coronary atherosclerosis and its association with CAC scores in a general population.Methods: We recruited 30 154 randomly invited individuals age 50 to 64 years to SCAPIS (the Swedish Cardiopulmonary Bioimage Study). The study includes individuals without known coronary heart disease (ie, no previous myocardial infarctions or cardiac procedures) and with high-quality results from CCTA and CAC imaging performed using dedicated dual-source CT scanners. Noncontrast images were scored for CAC. CCTA images were visually read and scored for coronary atherosclerosis per segment (defined as no atherosclerosis, 1% to 49% stenosis, or ≥50% stenosis). External validity of prevalence estimates was evaluated using inverse probability for participation weighting and Swedish register data.Results: In total, 25 182 individuals without known coronary heart disease were included (50.6% women). Any CCTA-detected atherosclerosis was found in 42.1%; any significant stenosis (≥50%) in 5.2%; left main, proximal left anterior descending artery, or 3-vessel disease in 1.9%; and any noncalcified plaques in 8.3% of this population. Onset of atherosclerosis was delayed on average by 10 years in women. Atherosclerosis was more prevalent in older individuals and predominantly found in the proximal left anterior descending artery. Prevalence of CCTA-detected atherosclerosis increased with increasing CAC scores. Among those with a CAC score >400, all had atherosclerosis and 45.7% had significant stenosis. In those with 0 CAC, 5.5% had atherosclerosis and 0.4% had significant stenosis. In participants with 0 CAC and intermediate 10-year risk of atherosclerotic cardiovascular disease according to the pooled cohort equation, 9.2% had CCTA-verified atherosclerosis. Prevalence estimates had excellent external validity and changed marginally when adjusted to the age-matched Swedish background population.Conclusions: Using CCTA in a large, random sample of the general population without established disease, we showed that silent coronary atherosclerosis is common in this population. High CAC scores convey a significant probability of substantial stenosis, and 0 CAC does not exclude atherosclerosis, particularly in those at higher baseline risk.
|
|
| 8. |
- Ding, Haoming, et al.
(författare)
-
Synthesis of MAX phases Nb2CuC and Ti2(Al0.1Cu0.9)N by A-site replacement reaction in molten salts
- 2019
-
Ingår i: Materials Research Letters. - : Taylor & Francis. - 2166-3831. ; 7:12, s. 510-516
-
Tidskriftsartikel (refereegranskat)abstract
- New MAX phases Ti2(AlxCu1−x)N and Nb2CuC were synthesized by A-site replacement by reacting Ti2AlN and Nb2AlC, respectively, with CuCl2 or CuI molten salt. X-ray diffraction, scanning electron microscopy, and atomically resolved scanning transmission electron microscopy showed complete A-site replacement in Nb2AlC, which lead to the formation of Nb2CuC. However, the replacement of Al in Ti2AlN phase was only close to complete at Ti2(Al0.1Cu0.9)N. Density-functional theory calculations corroborated the structural stability of Nb2CuC and Ti2CuN phases. Moreover, the calculated cleavage energy in these Cu-containing MAX phases are weaker than in their Al-containing counterparts.The preparation of MAX phases Nb2CuC and Ti2(Al0.1Cu0.9)N were realized by A-site replacement in Ti2AlN and Nb2AlN, respectively.
|
|
| 9. |
- Edebol Carlman, Hanna M. T., et al.
(författare)
-
Probiotic Mixture Containing Lactobacillus helveticus, Bifidobacterium longum and Lactiplantibacillus plantarum Affects Brain Responses to an Arithmetic Stress Task in Healthy Subjects : A Randomised Clinical Trial and Proof-of-Concept Study
- 2022
-
Ingår i: Nutrients. - : MDPI. - 2072-6643. ; 14:7
-
Tidskriftsartikel (refereegranskat)abstract
- Probiotics are suggested to impact physiological and psychological stress responses by acting on the gut-brain axis. We investigated if a probiotic product containing Bifidobacterium longum R0175, Lactobacillus helveticus R0052 and Lactiplantibacillus plantarum R1012 affected stress processing in a double-blinded, randomised, placebo-controlled, crossover proof-of-concept study (NCT03615651). Twenty-two healthy subjects (24.2 ± 3.4 years, 6 men/16 women) underwent a probiotic and placebo intervention for 4 weeks each, separated by a 4-week washout period. Subjects were examined by functional magnetic resonance imaging while performing the Montreal Imaging Stress Task (MIST) as well as an autonomic nervous system function assessment during the Stroop task. Reduced activation in regions of the lateral orbital and ventral cingulate gyri was observed after probiotic intervention compared to placebo. Significantly increased functional connectivity was found between the upper limbic region and medioventral area. Interestingly, probiotic intervention seemed to predominantly affect the initial stress response. Salivary cortisol secretion during the task was not altered. Probiotic intervention did not affect cognitive performance and autonomic nervous system function during Stroop. The probiotic intervention was able to subtly alter brain activity and functional connectivity in regions known to regulate emotion and stress responses. These findings support the potential of probiotics as a non-pharmaceutical treatment modality for stress-related disorders.
|
|
| 10. |
|
|
