| 1. |
- Giuliani, G., et al.
(författare)
-
Round-Robin Measurements of Linewidth Enhancement Factor of Semiconductor Lasers in COST 288 Action
- 2007
-
Ingår i: Lasers and Electro-Optics, 2007 and the International Quantum Electronics Conference. CLEOE-IQEC 2007. European Conference on. - 1424409306 - 9781424409303 ; , s. 4385967-
-
Konferensbidrag (refereegranskat)abstract
- Round-robin measurements on the linewidth enhancement factor are carried out in many laboratories participating to EU COST 288 Action. Up to 7 different techniques are applied to DFB, VCSELs, QCL, and QD lasers, and results are compared.
|
|
| 2. |
- Lang, J. J. K., et al.
(författare)
-
Tin-stabilized (1 x 2) and (1 x 4) reconstructions on GaAs(100) and InAs(100) studied by scanning tunneling microscopy, photoelectron spectroscopy, and ab initio calculations
- 2011
-
Ingår i: Surface Science. - : Elsevier BV. - 0039-6028 .- 1879-2758. ; 605:9-10, s. 883-888
-
Tidskriftsartikel (refereegranskat)abstract
- Tin (Sn) induced (1 x 2) reconstructions on GaAs(100) and InAs(100) substrates have been studied by low energy electron diffraction (LEED), photoelectron spectroscopy, scanning tunneling microscopy/spectroscopy (STM/STS) and ab initio calculations. The comparison of measured and calculated STM images and surface core-level shifts shows that these surfaces can be well described with the energetically stable building blocks that consist of Sn-III dimers. Furthermore, a new Sn-induced (1 x 4) reconstruction was found. In this reconstruction the occupied dangling bonds are closer to each other than in the more symmetric (1 x 2) reconstruction, and it is shown that the (1 x 4) reconstruction is stabilized as the adatom size increases.
|
|
| 3. |
- Laukkanen, P., et al.
(författare)
-
Anomalous bismuth-stabilized (2x1) reconstructions on GaAs(100) and InP(100) surfaces
- 2008
-
Ingår i: Physical Review Letters. - 0031-9007 .- 1079-7114. ; 100, s. 086101-
-
Tidskriftsartikel (refereegranskat)abstract
- First-principles phase diagrams of bismuth-stabilized GaAs- and InP(100) surfaces demonstrate for the first time the presence of anomalous (2 x 1) reconstructions, which disobey the common electron counting principle. Combining these theoretical results with our scanning-tunneling-microscopy and photoemission measurements, we identify novel (2 x 1) surface structures, which are composed of symmetric Bi-Bi and asymmetric mixed Bi-As and Bi-P dimers, and find that they are stabilized by stress relief and pseudogap formation.
|
|
| 4. |
- Punkkinen, M. P. J., et al.
(författare)
-
Bismuth-stabilized (2x1) and (2x4) reconstructions on GaAs(100) surfaces : Combined first-principles, photoemission, and scanning tunneling microscopy study
- 2008
-
Ingår i: Physical Review B. Condensed Matter and Materials Physics. - 1098-0121 .- 1550-235X. ; 78, s. 195304-
-
Tidskriftsartikel (refereegranskat)abstract
- Bismuth adsorbate-stabilized (2x1) and (2x4) reconstructions of the GaAs(100) surfaces have been studied by first-principles calculations, valence-band and core-level photoelectron spectroscopies, and scanning tunneling microscopy. It is demonstrated that large Bi atom size leads to the formation of the pseudogap at the Fermi energy and to the lower energy of an adsorbate-derived surface band, which contributes to the stabilization of the exceptional Bi/GaAs(100)(2x1) reconstruction. It is proposed that the Bi/GaAs(100)(2x4) reconstructions include asymmetric mixed Bi-As dimers, in addition to the Bi-Bi dimers. Based on the calculations, we solve the atomic origins of the surface core-level shifts (SCLSs) of the Bi 5d photoemission spectra from the Bi/GaAs(100)(2x4) surfaces. This allows for resolving the puzzle related to the identification of two SCLS components often found in the measurements of the Bi 5d and Sb 4d core-level emissions of the Bi/III-V and Sb/III-V(100)(2x4) surfaces. Finally, the reason for the absence of the common (2x4)-beta 2 structure and additional support for the stability of the (2x1) structure on the Bi/III-V(100) surfaces are discussed in terms of Bi atom size and subsurface stress.
|
|
| 5. |
- Punkkinen, M. P. J., et al.
(författare)
-
Surface core-level shifts of GaAs(100)(2x4) from first principles
- 2007
-
Ingår i: Physical Review B. Condensed Matter and Materials Physics. - 1098-0121 .- 1550-235X. ; 76:11
-
Tidskriftsartikel (refereegranskat)abstract
- First-principles calculations show that measured surface core-level shifts (SCLSs) of the GaAs(100)(2x4) surfaces can be described within the initial state effects. The calculated As 3d and Ga 3d SCLSs for the beta 2 and alpha 2 reconstructions of the GaAs(100)(2x4) surfaces are in reasonable agreement with recent measurements. In particular, the results confirm that both the lower and the higher binding energy SCLSs, relative to the bulk emission in the As 3d photoelectron spectra, are intrinsic properties of the GaAs(100)(2x4) surfaces. The most positive and most negative As shifts are attributed to the third layer As atoms, which differs from the previous intuitive suggestions. In general, calculations show that significant SCLSs arise from deep layers, and that there are more than two SCLSs. Our previously measured As 3d spectra are fitted afresh using the calculated SCLSs. The intensity ratios of the SCLSs, obtained from the fits, show that as the heating temperature of the GaAs(100)(2x4) surface is increased gradually, the area of the alpha 2 reconstruction increases on the surface, but the beta 2 phase remains within the whole temperature range, in agreement with previous experimental findings. Our results show that the combination of the experimental and theoretical results is a prerequisite for the accurate analysis of the SCLSs of the complex reconstructed surfaces.
|
|
| 6. |
- Lang, J. J. K., et al.
(författare)
-
Ab initio and scanning tunneling microscopy study of an indium-terminated GaAs(100) surface : An indium-induced surface reconstruction change in the c(8x2) structure
- 2010
-
Ingår i: Physical Review B. Condensed Matter and Materials Physics. - 1098-0121 .- 1550-235X. ; 81:24, s. 245305-
-
Tidskriftsartikel (refereegranskat)abstract
- Technologically useful indium- (In) terminated c(8 x 2)-reconstructed GaAs(100) substrate surface has been studied by first-principles calculations and scanning tunneling microscopy (STM) measurements. Our total-energy calculations demonstrate the stability of four different so-called zeta a structures with In monomer rows and In coverage between 0.5 and 2 monolayers on the GaAs(100) substrate. Thus, we introduce a surface system, which stabilizes the zeta a reconstruction. Furthermore, an interesting trend is found. Atomic structure of the c(8 x 2) reconstruction depends on the surface-layer cation and substrate volumes, which, in principle, allows to tune the surface structure by cation adsorption. This phenomenon is related to the peculiar c(8 x 2) atomic surface structure, which shows mixed surface layer, including both anions and cations, and uncommon metallic-type cations in the zeta a structure, which do not show covalent bonds. Our results predict a structural transition from the zeta structure to the zeta a structure as the surface cation size is increased at 0 K. The found transition is probably related to the disordered surface structures (consisting of zeta and zeta a building blocks) found experimentally by x-ray diffraction at room temperature. Comparison of the STM images, calculated for various c(8 x 2) models, with the former and present measured STM images of In/GaAs(100) c(8 x 2) supports the presence of stable zeta a reconstructions.
|
|
| 7. |
- Laukkanen, P., et al.
(författare)
-
A comparative study of clean and Bi-stabilized InP(100)(2 x 4) surfaces by the core-level photoelectron spectroscopy
- 2007
-
Ingår i: Surface Science. - : Elsevier BV. - 0039-6028. ; 601, s. 3395-
-
Tidskriftsartikel (refereegranskat)abstract
- The bismuth-stabilized (2 x 4)-reconstructed InP(100) surface [Bi/InP(100)(2 x 4)] has been studied by synchrotron-radiation core-level photoelectron spectroscopy. The spectra are compared with previous core-level data obtained on a clean InP(100)(2 x 4) surface. The findings support that the P 2p surface-core-level shift (SCLS) of the clean InP(100)(2 x 4), which has higher kinetic energy than the bulk emission, arises from the third-layer P atoms and that the second P 2p SCLS, which has lower kinetic energy than the bulk, arises from the top-layer P atoms. Similar In 4d SCLSs are found on the clean and Bi-stabilized InP(100)(2 x 4) surfaces, indicating that these shifts contain contributions of the In atoms that lie in the second and/or fourth layers. In addition to this, the results improve our understanding of the atomic structure of the Bi/InP(100)(2 x 4) surface and lead to refined surface models which include Bi-Bi and Bi-P dimers. (C) 2007 Elsevier B.V. All rights reserved.
|
|
| 8. |
- Laukkanen, P., et al.
(författare)
-
Bismuth-stabilized c(2X6) reconstruction on a InSb(100) substrate : Violation of the electron counting model
- 2010
-
Ingår i: Physical Review B. Condensed Matter and Materials Physics. - 1098-0121 .- 1550-235X .- 2469-9950 .- 2469-9969. ; 81:3
-
Tidskriftsartikel (refereegranskat)abstract
- By means of scanning tunneling microscopy/spectroscopy (STM/STS), photoelectron spectroscopy, and first-principles calculations, we have studied the bismuth (Bi) adsorbate-stabilized InSb(100) substrate surface which shows a c(2X6) low-energy electron diffraction pattern [thus labeled Bi/InSb(100)c(2X6) surface] and which includes areas with metallic STS curves as well as areas with semiconducting STS curves. The first-principles phase diagram of the Bi/InSb(100) surface demonstrates the presence of the Bi-stabilized metallic c(2X6) reconstruction and semiconducting (4X3) reconstruction depending on the chemical potentials, in good agreement with STS results. The existence of the metallic c(2X6) phase, which does not obey the electron counting model, is attributed to the partial prohibition of the relaxation in the direction perpendicular to dimer rows in the competing reconstructions and the peculiar stability of the Bi-stabilized dimer rows. Based on (i) first-principles phase diagram, (ii) STS results, and (iii) comparison of the measured and calculated STM and photoemission data, we show that the measured Bi/InSb(100)c(2X6) surface includes metallic areas with the stable c(2X6) atomic structure and semiconducting areas with the stable (4X3) atomic structure.
|
|
| 9. |
- Laukkanen, P., et al.
(författare)
-
Core-level shifts of the c(8 x 2)-reconstructed InAs(100) and InSb(100) surfaces
- 2010
-
Ingår i: Journal of Electron Spectroscopy and Related Phenomena. - : Elsevier BV. - 0368-2048 .- 1873-2526. ; 177:1, s. 52-57
-
Tidskriftsartikel (refereegranskat)abstract
- We have studied In-stabilized c(8 2)-reconstructed InAs(1 0 0) and InSb(1 0 0) semiconductor surfaces, which play a key role in growing improved III-V interfaces for electronics devices, by core-level photoelectron spectroscopy and first-principles calculations. The calculated surface core-level shifts (SCLSs) for the zeta and zeta a models, which have been previously established to describe the atomic structures of the III-V(1 00)c(8 x 2) surfaces, yield hitherto not reported interpretation for the As 3d, In 4d, and Sb 4d core-level spectra of the III-V(1 00)c(8 x 2) surfaces, concerning the number and origins of SCLSs. The fitting analysis of the measured spectra with the calculated zeta and zeta a SCLS values shows that the InSb spectra are reproduced by the zeta SCLSs better than by the zeta a SCLSs. Interestingly, the zeta a fits agree better with the InAs spectra than the zeta fits do, indicating that the zeta a model describes the InAs surface better than the InSb surface. These results are in agreement with previous X-ray diffraction data. Furthermore, an introduction of the complete-screening model, which includes both the initial and final state effects, does not improve the fitting of the InSb spectra, proposing the suitability of the initial-state model for the SCLSs of the III-V(1 0 0)c(8 x 2) surfaces. The found SCLSs are discussed with the ab initio on-site charges.
|
|
| 10. |
- Laukkanen, P, et al.
(författare)
-
Electronic and structural properties of GaAs(100)(2x4) and InAs(100)(2x4) surfaces studied by core-level photoemission and scanning tunneling microscopy
- 2005
-
Ingår i: Physical Review B (Condensed Matter and Materials Physics). - 1098-0121. ; 72:4
-
Tidskriftsartikel (refereegranskat)abstract
- Electronic and structural properties of GaAs(100)(2x4), InAs(100)(2x4), and Sb/InAs(100)(2x4) reconstructed surfaces have been studied by synchrotron-radiation photoelectron spectroscopy and scanning tunneling microscopy (STM). Based on the difference spectrum of As 3d core-level spectra of III-As(100)(2x4), measured in different surface-sensitivity conditions, as well as the line shape of the As 3d emission from the Sb-induced (2x4) surface, we give evidence that the As 3d spectra of GaAs(100)(2x4) and InAs(100)(2x4) consist of two surface-core-level-shifted components. One of them is shifted about 0.2 eV to the lower kinetic energy from the bulk component. On the basis of the relative component intensities, this surface-shifted As 3d component is assigned to the emission from the first-layer As dimers in the established model of the (2x4) surface. The other component, shifted about 0.3 eV to the higher kinetic energy, is connected to the third-layer As-dimer site. The comparison of the core-level results between GaAs(100)(2x4) and InAs(100)(2x4) suggests that the alpha 2 phase, which has one As dimer in both the first and third atomic layers per unit cell, exists on GaAs(100)(2x4), similarly to the case of InAs(100)(2x4), as predicted in theory but not observed to date. Furthermore, the STM observation of the GaAs(100)(2x4)alpha 2 phase is reported.
|
|
