| 1. |
- Nilsson, Magnus, et al.
(författare)
-
A 9-band WCDMA/EDGE transceiver supporting HSPA evolution
- 2011
-
Ingår i: [Host publication title missing]. - 0193-6530. ; , s. 366-368
-
Konferensbidrag (refereegranskat)abstract
- The future of cellular radio ICs lies in the integration of an ever-increasing number of bands and channel bandwidths. This paper presents a transceiver together with the associated discrete front-end components. The transceiver supports 4 EDGE bands and 9 WCDMA bands (l-VI and Vlll-X), while the radio can be configured to simultaneously support the 4 EDGE bands and up to 5 WCDMA bands: 3 high bands (HB) and 2 low bands (LB). The RX is a SAW-less homodyne composed of a main RX and a diversity RX. To reduce package complexity with so many bands, we chose to minimize the number of ports by using single-ended RF interfaces for both RX and TX. This saves seve ral package pins, but requires careful attention to grounding. The main RX has 8 LNA ports and the diversity RX has 5, with some LNAs supporting multiple bands. On the TX side, 2 ports are used for all EDGE bands and 4 for the WCDMA bands.
|
|
| 2. |
|
|
| 3. |
- Estrada, Karol, et al.
(författare)
-
Genome-wide meta-analysis identifies 56 bone mineral density loci and reveals 14 loci associated with risk of fracture.
- 2012
-
Ingår i: Nature genetics. - : Springer Science and Business Media LLC. - 1546-1718 .- 1061-4036. ; 44:5, s. 491-501
-
Tidskriftsartikel (refereegranskat)abstract
- Bone mineral density (BMD) is the most widely used predictor of fracture risk. We performed the largest meta-analysis to date on lumbar spine and femoral neck BMD, including 17 genome-wide association studies and 32,961 individuals of European and east Asian ancestry. We tested the top BMD-associated markers for replication in 50,933 independent subjects and for association with risk of low-trauma fracture in 31,016 individuals with a history of fracture (cases) and 102,444 controls. We identified 56 loci (32 new) associated with BMD at genome-wide significance (P < 5 × 10(-8)). Several of these factors cluster within the RANK-RANKL-OPG, mesenchymal stem cell differentiation, endochondral ossification and Wnt signaling pathways. However, we also discovered loci that were localized to genes not known to have a role in bone biology. Fourteen BMD-associated loci were also associated with fracture risk (P < 5 × 10(-4), Bonferroni corrected), of which six reached P < 5 × 10(-8), including at 18p11.21 (FAM210A), 7q21.3 (SLC25A13), 11q13.2 (LRP5), 4q22.1 (MEPE), 2p16.2 (SPTBN1) and 10q21.1 (DKK1). These findings shed light on the genetic architecture and pathophysiological mechanisms underlying BMD variation and fracture susceptibility.
|
|
| 4. |
- Gorschek, Tony, et al.
(författare)
-
Introduction of a Process Maturity Model for Market-driven Product Management and Requirements engineering
- 2012
-
Ingår i: Journal of Software Maintenance and Evolution. - : John Wiley and Sons. - 1532-060X .- 1532-0618. ; 24:1, s. 83-113
-
Tidskriftsartikel (refereegranskat)abstract
- The area of software product development of software intensive products has received much attention, especially in the area of requirements engineering and product management. Many companies are faced with new challenges when operating in an environment where potential requirements number in thousands or even tens of thousands, and where a product does not have a customer, but any number of customers or markets. The development organization carries not only all the costs of development, but also takes all the risks. In this environment traditional bespoke requirements engineering, together with traditional process assessment and improvement models fall short as they do not address the unique challenges of a market-driven environment. This paper introduces the Market-driven Requirements Engineering Process Model, aimed at enabling process improvement and process assurance for organizations faced with these new challenges. The model is also validated in the industry through three case studies where the model is used for process assessment and improvement suggestion. Initial results show that the model is appropriate for process improvement for organizations operating in a market-driven environment. In addition, the model was designed to be light weight in terms of low cost and thus adapted not only for large organizations but suitable for small and medium enterprises as well.
|
|
| 5. |
- Ivarsson, Martin, 1980, et al.
(författare)
-
A Practitioners Guide to Light Weight Software Process Assessment and Improvement Planning
- 2007
-
Ingår i: Journal of Systems and Software. - New York : Elsevier BV. - 0164-1212. ; 81:6, s. 972-995
-
Tidskriftsartikel (refereegranskat)abstract
- Software process improvement (SPI) is challenging, particularly for small and medium sized enterprises. Most existing SPI frameworks are either too expensive to deploy, or do not take an organizations’ specific needs into consideration. There is a need for light weight SPI frameworks that enable practitioners to base improvement efforts on the issues that are the most critical for the specific organization.This paper presents a step-by-step guide to process assessment and improvement planning using improvement framework utilizing light weight assessment and improvement planning (iFLAP), aimed at practitioners undertaking SPI initiatives. In addition to the guide itself the industrial application of iFLAP is shown through two industrial cases. iFLAP is a packaged improvement framework, containing both assessment and improvement planning capabilities, explicitly developed to be light weight in nature. Assessment is performed by eliciting improvements issues based on the organization’s experience and knowledge. The findings are validated through triangulation utilizing multiple data sources. iFLAP actively involves practitioners in prioritizing improvement issues and identifying dependencies between them in order to package improvements, and thus establish a, for the organization, realistic improvement plan. The two cases of iFLAP application in industry are presented together with lessons learned in order to exemplify actual use of the framework as well as challenges encountered.
|
|
| 6. |
|
|
| 7. |
- Khurum, Mahvish, et al.
(författare)
-
Systematic Review of Solutions Proposed for Product Line Economics
- 2008
-
Konferensbidrag (refereegranskat)abstract
- This paper presents a systematic review of all the solutions addressing different economic aspect of software product lines (SPL), e.g. SPL adoption cost-benefits, PL architecture decisions, SPL test strategies project cost overrun and so on, presented for the years 2000 to 2007. The goal of the review is to analyze the level of empirical application and/or validation of the proposed solutions with the purpose of mapping maturity as well as to what extent proposed solutions might be proven in terms of usability and usefulness. The important finding of this review is that although many economic solutions for SPL have been proposed over the years, the absence of qualitative and quantitative results from empirical application and/or validation makes it difficult to evaluate the potential of proposed solutions with respect to their usability and/or usefulness in relation to industry adoption. Suggestions have been presented to improve the existing situation.
|
|
| 8. |
- Koroidov, Sergey, et al.
(författare)
-
Chemisorbed oxygen or surface oxides steer the selectivity in Pd electrocatalytic propene oxidation observed by operando Pd L-edge X-ray absorption spectroscopy
- 2021
-
Ingår i: Catalysis Science & Technology. - : Royal Society of Chemistry (RSC). - 2044-4753 .- 2044-4761. ; 11:10, s. 3347-3352
-
Tidskriftsartikel (refereegranskat)abstract
- Controlled electrochemical oxidation of hydrocarbons to desired products is an attractive approach in catalysis. Here we study the electrochemical propene oxidation under operando conditions using Pd L-edge X-ray absorption spectroscopy (XAS) as a sensitive probe to elucidate surface processes occurring during catalysis. Together with ab initio multiple-scattering calculations, our XAS results enable assignment of characteristic changes of the Pd L-edge intensity and energy position in terms of a mechanistic understanding of the selective oxidation of propene. The results, supported by electrochemical density functional theory DFT simulations, show that in the potential range of 0.8–1.0 V vs. the reversible hydrogen electrode (RHE), selective oxidation of propene to acrolein and acrylic acid occurs on the metallic Pd surface. These reactions are proposed to proceed via the Langmuir–Hinshelwood mechanism. In contrast, for the potential range of 1.1–1.3 V vs. RHE, selective oxidation of propene to propylene glycol takes place on a Pd oxide surface.
|
|
| 9. |
- LaRue, Jerry, et al.
(författare)
-
Symmetry-resolved CO desorption and oxidation dynamics on O/Ru(0001) probed at the C K-edge by ultrafast x-ray spectroscopy
- 2022
-
Ingår i: Journal of Chemical Physics. - : AIP Publishing. - 0021-9606 .- 1089-7690. ; 157:16
-
Tidskriftsartikel (refereegranskat)abstract
- We report on carbon monoxide desorption and oxidation induced by 400 nm femtosecond laser excitation on the O/Ru(0001) surface probed by time-resolved x-ray absorption spectroscopy (TR-XAS) at the carbon K-edge. The experiments were performed under constant background pressures of CO (6 × 10−8 Torr) and O2 (3 × 10−8 Torr). Under these conditions, we detect two transient CO species with narrow 2π* peaks, suggesting little 2π* interaction with the surface. Based on polarization measurements, we find that these two species have opposing orientations: (1) CO favoring a more perpendicular orientation and (2) CO favoring a more parallel orientation with respect to the surface. We also directly detect gas-phase CO2 using a mass spectrometer and observe weak signatures of bent adsorbed CO2 at slightly higher x-ray energies than the 2π* region. These results are compared to previously reported TR-XAS results at the O K-edge, where the CO background pressure was three times lower (2 × 10−8 Torr) while maintaining the same O2 pressure. At the lower CO pressure, in the CO 2π* region, we observed adsorbed CO and a distribution of OC–O bond lengths close to the CO oxidation transition state, with little indication of gas-like CO. The shift toward “gas-like” CO species may be explained by the higher CO exposure, which blocks O adsorption, decreasing O coverage and increasing CO coverage. These effects decrease the CO desorption barrier through dipole–dipole interaction while simultaneously increasing the CO oxidation barrier.
|
|
| 10. |
|
|
