| 1. |
- Hannl, Thomas Karl, M.Sc. 1993-, et al.
(författare)
-
Bubbling fluidized bed co-combustion and co-gasification of sewage sludge with agricultural residues with a focus on the fate of phosphorus
- 2024
-
Ingår i: Fuel. - : Elsevier. - 0016-2361 .- 1873-7153. ; 357:part B
-
Tidskriftsartikel (refereegranskat)abstract
- In this work, the fate of the ash-forming elements during bubbling fluidized bed combustion and gasification of P-rich sewage sludge (SS) and mixtures with either Si-K-rich wheat straw (WS) or K-Ca-rich sunflower husks (SH) were investigated. The focus of the study was assessing the feasibility of using fuel blends in fluidized bed systems and potential P recovery from the resulting ashes. The used fuels were pure SS and mixtures including 90 wt.% WS (WSS) and 85 wt.% SH (SHS). The analyzed operating conditions were combustion (930–960 °C, λ: 1.2–1.5) and gasification (780–810 °C, λ: 0.4–0.7) in a 5 kW bench-scale reactor. Residual ash and char fractions were collected from different parts of the 5 kW bubbling fluidized bed (bed, cyclone, filter) and analyzed by CHN, SEM/EDS, XRD, and ICP-AES.The conversion of the fuel mixtures achieved a steady state under the used process conditions except for the combustion of WSS, which led to the formation of large bed agglomerates with the bed material. The morphology of ash samples after combustion showed that SS fuel pellets mostly maintained their integrity during the experiment. In contrast, the ash and char particles from fuel mixtures were fragmented, and larger quantities were found in the cyclone, the filter, or on interior reactor surfaces. The fate of P was dominated by crystalline Ca-dominated whitlockites in all ash fractions, partially including K for the fuel mixtures SHS and WSS. 76–81 % of ingoing P was found in the bed residue after combustion and gasification of the SS-fuel. After conversion of the fuel mixtures SHS and WSS, the share was lower at 22–48 %, with larger shares of P in the entrained fractions (25–34 %). The quantity of identified crystalline compounds was lower after gasification than combustion, likely due to the limited interaction of ash-forming elements in the residual CHN matrix. Altogether, the results show that fuel mixtures of sewage sludge with agricultural residues could expand the fuel feedstock and enable P recovery. This may be used in the fuel and process design of upscaled fluidized bed processes or systems employing both combustion and gasification.
|
|
| 2. |
|
|
| 3. |
- Priščák, Juraj, et al.
(författare)
-
Effect of time-dependent layer formation on the oxygen transport capacity of ilmenite during combustion of ash-rich woody biomass
- 2023
-
Ingår i: Fuel. - : Elsevier Ltd. - 0016-2361 .- 1873-7153. ; 353
-
Tidskriftsartikel (refereegranskat)abstract
- Oxygen carrier aided combustion (OCAC) is a novel technology that aims to enhance combustion of heterogenous fuels by replacing the inert bed material with an active oxygen carrier. One of the promising oxygen carriers is natural ilmenite which shows decent oxygen transport capacity and mechanical stability under OCAC operating conditions. However, interactions between ilmenite and woody biomass ash lead to the formation of a calcium-rich ash layer, which affects the ability of the oxygen carrier (OC) to transfer oxygen throughout the boiler and subsequently decreases the combustion efficiency. This paper focuses on the time-dependent morphological and compositional changes in ilmenite bed particles and the consequence effects on the oxygen transport capacity and reactivity of ilmenite. Ilmenite utilized in this study was investigated in a 5 kW bubbling fluidized bed combustion unit, utilizing ash-rich bark pellets as fuel. A negative effect of iron migration on the oxygen transport capacity was observed in ilmenite bed particles after 6 h of operation in the bubbling fluidized bed reactor. The decrease in the oxygen transport capacity of ilmenite was found to correlate with the increased exposure time in the fluidized bed reactor and was caused by the migration and subsequent erosion of Fe from the ilmenite particles. On the other hand, the older bed particles show an increase in reaction rate, presumably due to the catalytic activity of the calcium-enriched outer layer on the bed particle surface.
|
|
| 4. |
- Priscak, Juraj, et al.
(författare)
-
Investigation of the Formation of Coherent Ash Residues during Fluidized Bed Gasification of Wheat Straw Lignin
- 2020
-
Ingår i: Energies. - : MDPI AG. - 1996-1073. ; 13:15
-
Tidskriftsartikel (refereegranskat)abstract
- Thermal conversion of ash-rich fuels in fluidized bed systems is often associated with extensive operation problems caused by the high amount of reactive inorganics. This paper investigates the behavior of wheat straw lignin-a potential renewable fuel for dual fluidized bed gasification. The formation of coherent ash residues and its impact on the operation performance has been investigated and was supported by thermochemical equilibrium calculations in FactSage 7.3. The formation of those ash residues, and their subsequent accumulation on the surface of the fluidized bed, causes temperature and pressure fluctuations, which negatively influence the steady-state operation of the fluidized bed process. This paper presents a detailed characterization of the coherent ash residues, which consists mostly of silica and partially molten alkali silicates. Furthermore, the paper gives insights into the formation of these ash residues, dependent on the fuel pretreatment (pelletizing) of the wheat straw lignin, which increases their stability compared to the utilization of non-pelletized fuel.
|
|
| 5. |
- Wagner, Katharina, et al.
(författare)
-
Layer formation mechanism of K-feldspar in bubbling fluidized bed combustion of phosphorus-lean and phosphorus-rich residual biomass
- 2019
-
Ingår i: Applied Energy. - : Elsevier. - 0306-2619 .- 1872-9118. ; 248, s. 545-554
-
Tidskriftsartikel (refereegranskat)abstract
- The use of phosphorus-rich fuels in fluidized bed combustion is one probable way to support both heat and power production and phosphorus recovery. Ash is accumulated in the bed during combustion and interacts with the bed material to form layers and/or agglomerates, possibly removing phosphorus from the bed ash fraction. To further deepen the knowledge about the difference in the mechanisms behind the ash chemistry of phosphorus-lean and phosphorus-rich fuels, experiments in a 5 kW bench-scale-fluidized bed test-rig with K-feldspar as the bed material were conducted with bark, wheat straw, chicken manure, and chicken manure admixtures to bark and straw. Bed material samples were collected and studied for layer formation and agglomeration phenomena by scanning electron microscopy combined with energy dispersive X-ray spectrometry. The admixture of phosphorus-rich chicken manure to bark changed the layer formation mechanism, shifting the chemistry to the formation of phosphates rather than silicates. The admixture of chicken manure to straw reduced the ash melting and agglomeration risk, making it possible to increase the time until defluidization of the fluidized bed occurred. The results also highlight that an increased ash content does not necessarily lead to more ash melting related problems if the ash melting temperature is high enough.
|
|
