| 1. |
- Beal, Jacob, et al.
(författare)
-
Robust estimation of bacterial cell count from optical density
- 2020
-
Ingår i: Communications Biology. - : Springer Science and Business Media LLC. - 2399-3642. ; 3:1
-
Tidskriftsartikel (refereegranskat)abstract
- Optical density (OD) is widely used to estimate the density of cells in liquid culture, but cannot be compared between instruments without a standardized calibration protocol and is challenging to relate to actual cell count. We address this with an interlaboratory study comparing three simple, low-cost, and highly accessible OD calibration protocols across 244 laboratories, applied to eight strains of constitutive GFP-expressing E. coli. Based on our results, we recommend calibrating OD to estimated cell count using serial dilution of silica microspheres, which produces highly precise calibration (95.5% of residuals <1.2-fold), is easily assessed for quality control, also assesses instrument effective linear range, and can be combined with fluorescence calibration to obtain units of Molecules of Equivalent Fluorescein (MEFL) per cell, allowing direct comparison and data fusion with flow cytometry measurements: in our study, fluorescence per cell measurements showed only a 1.07-fold mean difference between plate reader and flow cytometry data.
|
|
| 2. |
- Gao, Ya, et al.
(författare)
-
CHARMM-GUI Supports Hydrogen Mass Repartitioning and Different Protonation States of Phosphates in Lipopolysaccharides
- 2021
-
Ingår i: Journal of Chemical Information and Modeling. - : American Chemical Society (ACS). - 1549-9596 .- 1549-960X. ; 61:2, s. 831-839
-
Tidskriftsartikel (refereegranskat)abstract
- Hydrogen mass repartitioning (HMR) that permits time steps of allatom molecular dynamics simulation up to 4 fs by increasing the mass of hydrogen atoms has been used in protein and phospholipid bilayers simulations to improve conformational sampling. Molecular simulation input generation via CHARMM-GUI now supports HMR for diverse simulation programs. In addition, considering ambiguous pH at the bacterial outer membrane surface, different protonation states, either -2e or -1e, of phosphate groups in lipopolysaccharides (LPS) are also supported in CHARMM-GUI LPS Modeler. To examine the robustness of HMR and the influence of protonation states of phosphate groups on LPS bilayer properties, eight different LPS-type all-atom systems with two phosphate protonation states are modeled and simulated utilizing both OpenMM 2-fs (standard) and 4-fs (HMR) schemes. Consistency in the conformational space sampled by standard and HMR simulations shows the reliability of HMR even in LPS, one of the most complex biomolecules. For systems with different protonation states, similar conformations are sampled with a PO41- or PO(4)(-)(2)group, but different phosphate protonation states make slight impacts on lipid packing and conformational properties of LPS acyl chains. Systems with PO41- have a slightly smaller area per lipid and thus slightly more ordered lipid A acyl chains compared to those with PO42-, due to more electrostatic repulsion between PO42- even with neutralizing Ca2+ ions. HMR and different protonation states of phosphates of LPS available in CHARMM-GUI are expected to be useful for further investigations of biological systems of diverse origin.
|
|
| 3. |
- Jo, Sunhwan, et al.
(författare)
-
Multiple Conformational States Contribute to the 3D Structure of a Glucan Decasaccharide : A Combined SAXS and MD Simulation Study
- 2018
-
Ingår i: Journal of Physical Chemistry B. - : American Chemical Society (ACS). - 1520-6106 .- 1520-5207. ; 122:3, s. 1169-1175
-
Tidskriftsartikel (refereegranskat)abstract
- The inherent flexibility of carbohydrates is dependent on stereochemical arrangements, and characterization of their influence and importance will give insight into the three-dimensional structure and dynamics. In this study, a beta-(1 -> 4)/beta-(1 -> 3)-linked glucosyl decasaccharide is experimentally investigated by synchrotron small-angle X-ray scattering from which its radius of gyration (R-g) is obtained. Molecular dynamics (MD) simulations of the decasaccharide show four populated states at each glycosidic linkage, namely, syn- and anti-conformations. The calculated R-g values from the MD simulation reveal that in addition to syn-conformers the presence of anti-psi conformational states is required to reproduce experimental scattering data, unveiling inherent glycosidic linkage flexibility. The CHARMM36 force field for carbohydrates thus describes the conformational flexibility of the decasaccharide very well and captures the conceptual importance that anti-conformers are to be anticipated at glycosidic linkages of carbohydrates.
|
|
| 4. |
- Lee, Jumin, et al.
(författare)
-
CHARMM-GUI Membrane Builder for Complex Biological Membrane Simulations with Glycolipids and Lipoglycans
- 2019
-
Ingår i: Journal of Chemical Theory and Computation. - : American Chemical Society (ACS). - 1549-9618 .- 1549-9626. ; 15:1, s. 775-786
-
Tidskriftsartikel (refereegranskat)abstract
- Glycolipids (such as glycoglycerolipids, glycosphingolipids, and glycosylphosphatidylinositol) and lipoglycans (such as lipopolysaccharides (LPS), lipooligosaccharides (LOS), mycobacterial lipoarabinomannan, and mycoplasma lipoglycans) are typically found on the surface of cell membranes and play crucial roles in various cellular functions. Characterizing their structure and dynamics at the molecular level is essential to understand their biological roles, but systematic generation of glycolipid and lipoglycan structures is challenging because of great variations in lipid structures and glycan sequences (i.e., carbohydrate types and their linkages). To facilitate the generation of all-atom glycolipid/LPS/LOS structures, we have developed Glycolipid Modeler and LPS Modeler in CHARMM-GUI (http://www.charmm-gui.org), a web-based interface that simplifies building of complex biological simulation systems. In addition, we have incorporated these modules into Membrane Builder so that users can readily build a complex symmetric or asymmetric biological membrane system with various glycolipids and LPS/LOS. These tools are expected to be useful in innovative and novel glycolipid/LPS/LOS modeling and simulation research by easing tedious and intricate steps in modeling complex biological systems and shall provide insight into structures, dynamics, and underlying mechanisms of complex glycolipid-/LPS-/LOS-containing biological membrane systems.
|
|
| 5. |
- Luo, Yifei, et al.
(författare)
-
Technology Roadmap for Flexible Sensors
- 2023
-
Ingår i: ACS Nano. - : American Chemical Society. - 1936-0851 .- 1936-086X. ; 17:6, s. 5211-5295
-
Forskningsöversikt (refereegranskat)abstract
- Humans rely increasingly on sensors to address grand challenges and to improve quality of life in the era of digitalization and big data. For ubiquitous sensing, flexible sensors are developed to overcome the limitations of conventional rigid counterparts. Despite rapid advancement in bench-side research over the last decade, the market adoption of flexible sensors remains limited. To ease and to expedite their deployment, here, we identify bottlenecks hindering the maturation of flexible sensors and propose promising solutions. We first analyze challenges in achieving satisfactory sensing performance for real-world applications and then summarize issues in compatible sensor-biology interfaces, followed by brief discussions on powering and connecting sensor networks. Issues en route to commercialization and for sustainable growth of the sector are also analyzed, highlighting environmental concerns and emphasizing nontechnical issues such as business, regulatory, and ethical considerations. Additionally, we look at future intelligent flexible sensors. In proposing a comprehensive roadmap, we hope to steer research efforts towards common goals and to guide coordinated development strategies from disparate communities. Through such collaborative efforts, scientific breakthroughs can be made sooner and capitalized for the betterment of humanity.
|
|
| 6. |
- Patel, Dhilon S., et al.
(författare)
-
Dynamics and Interactions of OmpF and LPS : Influence on Pore Accessibility and Ion Permeability
- 2016
-
Ingår i: Biophysical Journal. - : Biophysical Society. - 0006-3495 .- 1542-0086. ; 110:4, s. 930-938
-
Tidskriftsartikel (refereegranskat)abstract
- The asymmetric outer membrane of Gram-negative bacteria is formed of the inner leaflet with phospholipids and the outer leaflet with lipopolysaccharides (LPS). Outer membrane protein F (OmpF) is a trimeric porin responsible for the passive transport of small molecules across the outer membrane of Escherichia coli. Here, we report the impact of different levels of heterogeneity in LPS environments on the structure and dynamics of OmpF using all-atom molecular dynamics simulations. The simulations provide insight into the flexibility and dynamics of LPS components that are highly dependent on local environments, with lipid A being the most rigid and O-antigen being the most flexible. Increased flexibility of O-antigen polysaccharides is observed in heterogeneous LPS systems, where the adjacent O-antigen repeating units are weakly interacting and thus more dynamic, compared to homogeneous LPS systems in which LPS interacts strongly with each other with limited overall flexibility due to dense packing. The model systems were validated by comparing molecular-level details of interactions between OmpF surface residues and LPS core sugars with experimental data, establishing the importance of LPS core oligosaccharides in shielding OmpF surface epitopes recognized by monoclonal antibodies. There are LPS environmental influences on the movement of bulk ions (K+ and Cl-), but the ion selectivity of OmpF is mainly affected by bulk ion concentration.
|
|
| 7. |
- Zhang, Heng, et al.
(författare)
-
DoS Attack Energy Management Against Remote State Estimation
- 2018
-
Ingår i: IEEE Transactions on Control of Network Systems. - : IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC. - 2325-5870. ; 5:1, s. 383-394
-
Tidskriftsartikel (refereegranskat)abstract
- This paper considers a remote state estimation problem, where a sensor measures the state of a linear discrete-time process and has computational capability to implement a local Kalman filter based on its own measurements. The sensor sends its local estimates to a remote estimator over a communication channel that is exposed to a Denial-of-Service (DoS) attacker. The DoS attacker, subject to limited energy budget, intentionally jams the communication channel by emitting interference noises with the purpose of deteriorating estimation performance. In order to maximize attack effect, following the existing answer to "when to attack the communication channel", in this paper we manage to solve the problem of "how much power the attacker should use to jam the channel in each time". For the static attack energy allocation problem, when the system matrix is normal, we derive a sufficient condition for when the maximum number of jamming operations should be used. The associated jamming power is explicitly provided. For a general system case, we propose an attack power allocation algorithm and show the computational complexity of the proposed algorithm is not worse than O(T), where T is the length of the time horizon considered. When the attack can receive the real-time ACK information, we formulate a dynamic attack energy allocation problem, and transform it to a Markov Decision Process to find the optimal solution.
|
|
