| 1. |
- Murari, A., et al.
(författare)
-
A control oriented strategy of disruption prediction to avoid the configuration collapse of tokamak reactors
- 2024
-
Ingår i: Nature Communications. - 2041-1723 .- 2041-1723. ; 15:1
-
Tidskriftsartikel (refereegranskat)abstract
- The objective of thermonuclear fusion consists of producing electricity from the coalescence of light nuclei in high temperature plasmas. The most promising route to fusion envisages the confinement of such plasmas with magnetic fields, whose most studied configuration is the tokamak. Disruptions are catastrophic collapses affecting all tokamak devices and one of the main potential showstoppers on the route to a commercial reactor. In this work we report how, deploying innovative analysis methods on thousands of JET experiments covering the isotopic compositions from hydrogen to full tritium and including the major D-T campaign, the nature of the various forms of collapse is investigated in all phases of the discharges. An original approach to proximity detection has been developed, which allows determining both the probability of and the time interval remaining before an incoming disruption, with adaptive, from scratch, real time compatible techniques. The results indicate that physics based prediction and control tools can be developed, to deploy realistic strategies of disruption avoidance and prevention, meeting the requirements of the next generation of devices.
|
|
| 2. |
|
|
| 3. |
|
|
| 4. |
|
|
| 5. |
- Packer, L. W., et al.
(författare)
-
Activation of ITER materials in JET : nuclear characterisation experiments for the long-term irradiation station
- 2018
-
Ingår i: Nuclear Fusion. - : IOP PUBLISHING LTD. - 0029-5515 .- 1741-4326. ; 58:9
-
Tidskriftsartikel (refereegranskat)abstract
- This paper details progress in experimental characterisation work at JET for the long-term irradiation station, conducted as part of a project to perform activation experiments using ITER materials. The aim is to take advantage of the significant 14 MeV neutron yield expected during JET operations to irradiate samples of materials that will be used in the manufacturing of ITER tokamak components, such as Nb3Sn, SS316L steels from a range of manufacturers, SS304B, Alloy 660, W, CuCrZr, OF-Cu, XM-19, Al bronze, NbTi and EUROFER. This paper presents an assessment of the nuclear environment at the relevant irradiation locations at JET, measured using a range of high purity dosimetry foils: Ti, Ni, Y, Fe, Co, Sc, and Ta, irradiated with fusion neutrons at JET over a period of 15 months. Experimental results arc presented and compared to simulation predictions using a JET MCNP model coupled with the FISPACT-II inventory code. Comparisons are made for a total of 11 nuclear reactions using a range of nuclear data libraries in calculations.
|
|
| 6. |
- Stancar, Z., et al.
(författare)
-
Experimental validation of an integrated modelling approach to neutron emission studies at JET
- 2021
-
Ingår i: Nuclear Fusion. - : Institute of Physics Publishing (IOPP). - 0029-5515 .- 1741-4326. ; 61:12
-
Tidskriftsartikel (refereegranskat)abstract
- An integrated modelling methodology for the calculation of realistic plasma neutron sources for the JET tokamak has been developed. The computational chain comprises TRANSP plasma transport and DRESS neutron spectrum calculations, and their coupling to the MCNP neutron transport code, bridging plasma physics and neutronics. In the paper we apply the developed methodology to the analysis of neutron emission properties of deuterium and helium plasmas at JET, and validate individual modelling steps against neutron diagnostic measurements. Two types of JET discharges are modelled-baseline-like and three-ion radio-frequency scenarios-due to their diversity in plasma heating, characteristics of the induced fast ion population, and the imprint of these on neutron emission properties. The neutron emission modelling results are quantitatively compared to the total neutron yield from fission chambers, neutron emissivity profiles from the neutron camera, neutron spectra from the time-of-flight spectrometer, and neutron activation measurements. The agreement between measured and calculated quantities is found to be satisfactory for all four diagnostic systems within the estimated experimental and computational uncertainties. Additionally, the effect of neutrons not originating from the dominating D(D, n)He-3 reactions is studied through modelling of triton burnup DT neutrons, and, in mixed D-He-3 plasmas, neutrons produced in the Be-9(D, n gamma)B-10 reaction on impurities. It is found that these reactions can contribute up to several percent to the total neutron yield and dominate the neutron activation of samples. The effect of MeV-range fast ions on the neutron activation of In-115 and Al-27 samples is measured and computationally validated.
|
|
| 7. |
- Barbu, Mikael, et al.
(författare)
-
Hemostatic effects of a dextran-based priming solution for cardiopulmonary bypass: A secondary analysis of a randomized clinical trial
- 2023
-
Ingår i: Thrombosis Research. - : Elsevier BV. - 0049-3848. ; 223, s. 139-145
-
Tidskriftsartikel (refereegranskat)abstract
- Introduction: Intravascular fluids administered to patients may influence hemostasis. In patients undergoing cardiac surgery with cardiopulmonary bypass, the heart-lung machine is primed with 1300 ml of fluid. We assessed postoperative coagulation and platelet function in patients randomized to two different priming solu-tions, one colloid-based (dextran 40) and one crystalloid-based.Materials and methods: Eighty-four elective cardiac surgery patients were randomized to either a dextran-based prime or Ringer's acetate with added mannitol. Blood samples were collected before, and 2 and 24 h after cardiopulmonary bypass. Coagulation was assessed by standard coagulation tests and rotational thromboelas-tometry. Platelet function was assessed with impedance aggregometry. Bleeding volumes and transfusion re-quirements were recorded.Results: Comparing the groups 2 h after bypass, the dextran group showed lower hemoglobin concentration, hematocrit, platelet count, and fibrinogen concentration, and higher INR and aPTT, as well as longer clot for-mation time (+41 +/- 21 % vs. +8 +/- 18 %, p < 0.001) and a larger reduction in fibrinogen-dependent clot strength (-37 +/- 12 % vs.-7 +/- 20 %, p < 0.001). Adenosine diphosphate-dependent platelet activation was reduced in the dextran group but not in the crystalloid group 2 h after bypass (-14 +/- 29 % vs.-1 +/- 41 %, p = 0.041). No significant between-group differences in hemostatic variables remained after 24 h, and no significant differences in perioperative bleeding volumes, re-explorations for bleeding, or transfusion rates were observed.Conclusions: Compared to a crystalloid solution, a dextran-based prime had measurable negative impact on he-mostatic variables but no detectable increase in bleeding volume or transfusion requirements in cardiac surgery patients.
|
|
| 8. |
- Brkovic, S. M., et al.
(författare)
-
Non-stoichiometric tungsten-carbide-oxide-supported Pt–Ru anode catalysts for PEM fuel cells – From basic electrochemistry to fuel cell performance
- 2020
-
Ingår i: International journal of hydrogen energy. - : Elsevier. - 0360-3199 .- 1879-3487. ; 45:27, s. 13929-13938
-
Tidskriftsartikel (refereegranskat)abstract
- Durability and cost of Proton Exchange Membrane fuel cells (PEMFCs) are two major factors delaying their commercialization. Cost is associated with the price of the catalysts, while durability is associated with degradation and poisoning of the catalysts, primarily by CO. This motivated us to develop tungsten-carbide-oxide (WxCyOz) as a new non-carbon based catalyst support for Pt–Ru–based anode PEMFC catalyst. The aim was to improve performance and obtain higher CO tolerance compared to commercial catalysts. The performance of obtained PtRu/WxCyOz catalysts was investigated using cyclic voltammetry, linear scan voltammetry and rotating disk electrode voltammetry. Particular attention was given to the analysis of CO poisoning, to better understand how WxCyOz species can contribute to the CO tolerance of PtRu/WxCyOz. Improved oxidation of COads at low potentials (E < 0.5 V vs. RHE) was ascribed to OH provided by the oxide phase at the interfacial region between the support and the PtRu particles. On the other hand, at high potentials (E > 0.5 V vs. RHE) CO removal proceeds dominantly via OH provided from the oxidized metal sites. The obtained catalyst with the best performance (30% PtRu/WxCyOz) was tested as an anode catalyst in PEM fuel cell. When using synthetic reformate as a fuel in PEMFC, there is a significant power drop of 35.3 % for the commercial 30% PtRu/C catalyst, while for the PtRu/WxCyOz anode catalyst this drop is around 16 %.
|
|
