| 1. |
- Abbas, Muhammad Tahir, et al.
(författare)
-
Energy-Saving Solutions for Cellular Internet of Things - A Survey
- 2022
-
Ingår i: IEEE Access. - IEEE : IEEE. - 2169-3536. ; 10, s. 62096-62096
-
Tidskriftsartikel (refereegranskat)abstract
- The Cellular Internet of Things (CIoT), a new paradigm, paves the way for a large-scale deployment of IoT devices. CIoT promises enhanced coverage and massive deployment of low-cost IoT devices with an expected battery life of up to 10 years. However, such a long battery life can only be achieved provided the CIoT device is configured with energy efficiency in mind. This paper conducts a comprehensive survey on energy-saving solutions in 3GPP-based CIoT networks. In comparison to current studies, the contribution of this paper is the classification and an extensive analysis of existing energy-saving solutions for CIoT, e.g., the configuration of particular parameter values and software modifications of transport- or radio-layer protocols, while also stressing key parameters impacting the energy consumption such as the frequency of data reporting, discontinuous reception cycles (DRX), and Radio Resource Control (RRC) timers. In addition, we discuss shortcomings, limitations, and possible opportunities which can be investigated in the future to reduce the energy consumption of CIoT devices.
|
|
| 2. |
- Abbas, Muhammad Tahir
(författare)
-
Improving the Energy Efficiency of Cellular IoT Device
- 2023
-
Licentiatavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Cellular Internet of Things (CIoT) has emerged as a promising technology to support applications that generate infrequent data. One requirement on these applications, often battery-powered devices, is low energy consumption to enable extended battery life. Narrowband IoT (NB-IoT) is a promising technology for IoT due to its low power consumption, which is essential for devices that need to run on battery power for extended periods. However, the current battery life of NB-IoT devices is only a few years, which is insufficient for many applications. This thesis investigates the impact of energy-saving mechanisms standardized by 3GPP on battery life of NB-IoT devices. The main research objective is to classify and analyze existing energy-saving solutions for CIoT and examine their limitations, to study the impact of standardized energy-saving mechanisms on the battery life of NB-IoT devices, both in isolation and combined, and to provide guidelines on how to configure NB-IoT devices to reduce energy consumption efficiently. The research aims to provide a deeper understanding of the effect of energy-saving mechanisms and best practices to balance energy efficiency and performance of NB-IoT devices. Applying the proposed solutions makes it possible to achieve a battery life of 10~years or more for CIoT devices.
|
|
| 3. |
- Abbas, Muhammad Tahir, et al.
(författare)
-
On the Energy-efficient Use of Discontinuous Reception and Release Assistance in NB-IoT
- 2022
-
Konferensbidrag (refereegranskat)abstract
- Cellular Internet of Things (CIoT) is a Low-Power Wide-Area Network (LPWAN) technology. It aims for cheap, lowcomplexity IoT devices that enable large-scale deployments and wide-area coverage. Moreover, to make large-scale deployments of CIoT devices in remote and hard-to-access locations possible, a long device battery life is one of the main objectives of these devices. To this end, 3GPP has defined several energysaving mechanisms for CIoT technologies, not least for the Narrow-Band Internet of Things (NB-IoT) technology, one of the major CIoT technologies. Examples of mechanisms defined include CONNECTED-mode DRX (cDRX), Release Assistance Indicator (RAI), and Power Saving Mode (PSM). This paper considers the impact of the essential energy-saving mechanisms on minimizing the energy consumption of NB-IoT devices, especially the cDRX and RAI mechanisms. The paper uses a purpose-built NB-IoT simulator that has been tested in terms of its built-in energy-saving mechanisms and validated with realworld NB-IoT measurements. The simulated results show that it is possible to save 70%-90% in energy consumption by enabling the cDRX and RAI. In fact, the results suggest that a battery life of 10 years is only achievable provided the cDRX, RAI, and PSM energy-saving mechanisms are correctly configured and used
|
|
| 4. |
- Alay, Özgü, et al.
(författare)
-
Monitoring and Analytics (Release B)
- 2021
-
Rapport (refereegranskat)abstract
- This document describes the design and implementation of the 5GENESIS Monitoring & Analytics (M&A) framework in its Release B, developed within Task T3.3 of the project work plan. M&A Release B leverages and extends M&A Release A, which has been documented in the previous Deliverable D3.5 [1]. In particular, we present new features and enhancements introduced in this new Release compared to the Release A. We also report some examples of usage of the M&A framework, in order to showcase its integrated in the 5GENESIS Reference Architecture.
|
|
| 5. |
- Ali, Usman, et al.
(författare)
-
Data-Driven Analysis of Outdoor-to-Indoor Propagation for 5G Mid-Band Operational Networks
- 2022
-
Ingår i: Future Internet. - : MDPI. - 1999-5903. ; 14:8, s. 1-27
-
Tidskriftsartikel (refereegranskat)abstract
- The successful rollout of fifth-generation (5G) networks requires a full understanding of the behavior of the propagation channel, taking into account the signal formats and the frequencies standardized by the Third Generation Partnership Project (3GPP). In the past, channel characterization for 5G has been addressed mainly based on the measurements performed on dedicated links in experimental setups. This paper presents a state-of-the-art contribution to the characterization of the outdoor-to-indoor radio channel in the 3.5 GHz band, based on experimental data for commercial, deployed 5G networks, collected during a large scale measurement campaign carried out in the city of Rome, Italy. The analysis presented in this work focuses on downlink, outdoor-to-indoor propagation for two operators adopting two different beamforming strategies, single wide-beam and multiple synchronization signal blocks (SSB) based beamforming; it is indeed the first contribution studying the impact of beamforming strategy in real 5G networks. The time and power-related channel characteristics, i.e., mean excess delay and Root Mean Square (RMS) delay spread, path loss, and K-factor are studied for the two operators in multiple measurement locations. The analysis of time and power-related parameters is supported and extended by a correlation analysis between each pair of parameters. The results show that beamforming strategy has a marked impact on propagation. A single wide-beam transmission leads, in fact, to lower RMS delay spread and lower mean excess delay compared to a multiple SSB-based transmission strategy. In addition, the single wide-beam transmission system is characterized by a smaller path loss and a higher K-factor, suggesting that the adoption of a multiple SSB-based transmission strategy may have a negative impact on downlink performance.
|
|
| 6. |
- Ali, Usman, et al.
(författare)
-
Large-Scale Dataset for the Analysis of Outdoor-to-Indoor Propagation for 5G Mid-Band Operational Networks
- 2022
-
Ingår i: Data. - : MDPI. - 2306-5729. ; 7:3, s. 34-34
-
Tidskriftsartikel (refereegranskat)abstract
- Understanding radio propagation characteristics and developing channel models is fundamental to building and operating wireless communication systems. Among others uses, channel characterization and modeling can be used for coverage and performance analysis and prediction. Within this context, this paper describes a comprehensive dataset of channel measurements performed to analyze outdoor-to-indoor propagation characteristics in the mid-band spectrum identified for the operation of 5th Generation (5G) cellular systems. Previous efforts to analyze outdoor-to-indoor propagation characteristics in this band were made by using measurements collected on dedicated, mostly single-link setups. Hence, measurements performed on deployed and operational 5G networks still lack in the literature. To fill this gap, this paper presents a dataset of measurements performed over commercial 5G networks. In particular, the dataset includes measurements of channel power delay profiles from two 5G networks in Band n78, i.e., 3.3–3.8 GHz. Such measurements were collected at multiple locations in a large office building in the city of Rome, Italy by using the Rohde & Schwarz (R&S) TSMA6 network scanner during several weeks in 2020 and 2021. A primary goal of the dataset is to provide an opportunity for researchers to investigate a large set of 5G channel measurements, aiming at analyzing the corresponding propagation characteristics toward the definition and refinement of empirical channel propagation models.
|
|
| 7. |
|
|
| 8. |
- Caso, Giuseppe, et al.
(författare)
-
An Initial Look into the Performance Evolution of 5G Non-Standalone Networks
- 2023
-
Ingår i: TMA 2023 - Proceedings of the 7th Network Traffic Measurement and Analysis Conference. - : Institute of Electrical and Electronics Engineers (IEEE). - 9798350325676 - 9783903176584 ; , s. 1-4
-
Konferensbidrag (refereegranskat)abstract
- Fifth Generation (5G) networks have been operational worldwide for a couple of years. To reveal how the 5G system evolution (e.g., changes in network conditions, deployment, and configurations) affects user performance, empirical long-term analyses are required. This paper presents preliminary insights from our ongoing large-scale measurement study of the commercial 5G non-standalone (NSA) networks deployed in Rome, Italy. An initial comparison between the measurements in 2020-2021 vs. 2023 shows a decrease in throughput and latency performance, calling for deeper analyses toward understanding the root causes and deriving proper optimization solutions.
|
|
| 9. |
- Caso, Giuseppe, et al.
(författare)
-
Monitoring and Analytics (Release A)
- 2019
-
Rapport (refereegranskat)abstract
- This document describes the design and implementation of the 5GENESIS Monitoring & Analytics (M&A) framework (Release A), developed within Task T3.3 of the Project work plan.
|
|
| 10. |
- Emmelmann, Marc, et al.
(författare)
-
Deliverable 6.2: Trials and experimentation (cycle 2)
- 2020
-
Rapport (refereegranskat)abstract
- This deliverable presents the second cycle of trials and experimentation activities executed over 5GENESIS facilities. The document is the continuation of deliverable D6.1, in the sense that it captures tests carried out over the evolved infrastructures hosting 5GENESIS facilities following the methodology defined in D6.1. In this document 8 main KPIs and 4 application specific validation trials achieved, under 123 experiments that performed in total. The tests focus more on i) the evolved 5G infrastructure deployments that includes radio and core elements in non-standalone (NSA) deployment configurations based on commercial and open implementations, and ii) the use of Open 5GENESIS Suite for the execution of the tests.
|
|
