| 1. |
- Artini, Cristina, et al.
(författare)
-
Roadmap on thermoelectricity
- 2023
-
Ingår i: Nanotechnology. - : IOP Publishing Ltd. - 0957-4484 .- 1361-6528. ; 34:29
-
Tidskriftsartikel (refereegranskat)abstract
- The increasing energy demand and the ever more pressing need for clean technologies of energy conversion pose one of the most urgent and complicated issues of our age. Thermoelectricity, namely the direct conversion of waste heat into electricity, is a promising technique based on a long-standing physical phenomenon, which still has not fully developed its potential, mainly due to the low efficiency of the process. In order to improve the thermoelectric performance, a huge effort is being made by physicists, materials scientists and engineers, with the primary aims of better understanding the fundamental issues ruling the improvement of the thermoelectric figure of merit, and finally building the most efficient thermoelectric devices. In this Roadmap an overview is given about the most recent experimental and computational results obtained within the Italian research community on the optimization of composition and morphology of some thermoelectric materials, as well as on the design of thermoelectric and hybrid thermoelectric/photovoltaic devices.
|
|
| 2. |
- Augustin, Ingo, et al.
(författare)
-
HEP Applications Evaluation of the EDG Testbed and Middleware
- 2003
-
Konferensbidrag (refereegranskat)abstract
- Workpackage 8 of the European Datagrid project was formed in January 2001 with representatives from the four LHC experiments, and with experiment independent people from five of the six main EDG partners. In September 2002 WP8 was strengthened by the addition of effort from BaBar and D0. The original mandate of WP8 was, following the definition of short- and long-term requirements, to port experiment software to the EDG middleware and testbed environment. A major additional activity has been testing the basic functionality and performance of this environment. This paper reviews experiences and evaluations in the areas of job submission, data management, mass storage handling, information systems and monitoring. It also comments on the problems of remote debugging, the portability of code, and scaling problems with increasing numbers of jobs, sites and nodes. Reference is made to the pioneeering work of Atlas and CMS in integrating the use of the EDG Testbed into their data challenges. A forward look is made to essential software developments within EDG and to the necessary cooperation between EDG and LCG for the LCG prototype due in mid 2003.
|
|
| 3. |
- Burke, Stephen, et al.
(författare)
-
HEP Applications and Their Experience with the Use of DataGrid Middleware
- 2004
-
Ingår i: Journal of Grid Computing. - : Springer Science and Business Media LLC. - 1572-9184 .- 1570-7873. ; 2:4, s. 369-386
-
Tidskriftsartikel (refereegranskat)abstract
- An overview is presented of the characteristics of HEP computing and its mapping to the Grid paradigm. This is followed by a synopsis of the main experiences and lessons learned by HEP experiments in their use of DataGrid middleware using both the EDG application testbed and the LCG production service. Particular reference is made to experiment lsquodata challengesrsquo, and a forward look is given to necessary developments in the framework of the EGEE project
|
|
| 4. |
- Mardi, Saeed, et al.
(författare)
-
3D cellulose fiber networks modified by PEDOT:PSS/graphene nanoplatelets for thermoelectric applications
- 2022
-
Ingår i: Applied Physics Letters. - : AIP Publishing. - 0003-6951 .- 1077-3118. ; 120:3
-
Tidskriftsartikel (refereegranskat)abstract
- Organic materials have attracted considerable attention for thermoelectric (TE) applications. Given their potential as wearable power generators, there is an urgent need to develop organic TE materials that possess superior electronic properties as well as excellent mechanical and environmental stability. Here, we develop paper-based TE materials using the poly(3,4-ethylenedioxythiophene): polystyrenesulfonate (PEDOT:PSS), graphene nanoplatelets (GNPs), and a starch-based biopolymer as a binder for GNPs. The device fabrication consists of spraying the biopolymer/GNP ink onto the cellulose paper followed by spraying the PEDOT:PSS solution. Further enhancement of TE properties was obtained by adding an ionic liquid (IL), bis(trifluoromethane)sulfonimide lithium salt to the PEDOT:PSS solution. Upon addition of the IL, the electrical conductivity of as-fabricated PEDOT:PSS films increased nearly two orders of magnitude. The electrical conductivity increases with GNPs content due to formation of an effective electrical percolation network. Interestingly, incorporating GNPs simultaneously improves the Seebeck coefficient. Raman measurements suggest that the concurrent enhancement of the Seebeck coefficient and electrical conductivity might be related to the chemical bonding between the conducting polymer chains and the filler. In addition, these composites display remarkable flexibility at various bending angles and environmental stability without losing their original conductivity after three months of exposure to ambient conditions.
|
|
| 5. |
- Mardi, Saeed, et al.
(författare)
-
Enhanced Thermoelectric Properties of Poly(3-hexylthiophene) through the Incorporation of Aligned Carbon Nanotube Forest and Chemical Treatments
- 2021
-
Ingår i: ACS Omega. - : American Chemical Society (ACS). - 2470-1343. ; 6:2, s. 1073-1082
-
Tidskriftsartikel (refereegranskat)abstract
- Carbon nanotube/polymer composites have recently received considerable attention for thermoelectric (TE) applications. The TE power factor can be significantly improved by forming composites with carbon nanotubes. However, the formation of a uniform and well-ordered nanocomposite film is still challenging because of the creation of agglomerates and the uneven distribution of nanotubes. Here, we developed a facile, efficient, and easy-processable route to produce uniform and aligned nanocomposite films of P3HT and carbon nanotube forest (CNTF). The electrical conductivity of a pristine P3HT film was improved from ∼10–7 to 160 S/cm thanks to the presence of CNTF. Also, a further boost in TE performance was achieved using two additives, lithium bis(trifluoromethanesulfonyl) imide (LiTFSI) and tert-butylpyridine. By adding the additives to P3HT, the degree of interchain order increased, which facilitated the charge transport through the composite. Under the optimal conditions, the incorporation of CNTF and additives led to values of the Seebeck coefficient, electrical conductivity, and power factor up to rising 92 μV/K, 130 S/cm, and 110 μW/m K2, respectively, at a temperature of 344.15 K. The excellent TE performance of the hybrid films originates from the dramatically increased electrical conductivity and the improved Seebeck coefficient by CNTF and additives, respectively.
|
|
| 6. |
- Mardi, Saeed, et al.
(författare)
-
Interfacial Effect Boosts the Performance of All-Polymer Ionic Thermoelectric Supercapacitors
- 2022
-
Ingår i: Advanced Materials Interfaces. - : Wiley. - 2196-7350. ; 9:31
-
Tidskriftsartikel (refereegranskat)abstract
- Ionic thermoelectric supercapacitors (ITESCs) have recently been developed for converting low-grade waste heat into electricity. Until now, most reports of ITESCs have been focused on the development of electrolytes, which then have been combined with a specific electrode material. Here, it is demonstrated that the electrode is not only critical for electrical energy storage but also greatly affects the effective thermopower (S-eff) of an ITESC. It is shown that the same ion gel can generate a positive thermopower in an ITESC when using gold nanowire (AuNW) electrodes, while generating a negative thermopower when using poly(3,4-ethylendioxythiophene):polystyrene sulfonate (PEDOT:PSS) electrodes. The achieved negative sign of the S-eff could be attributed to the Donnan exclusive effect from the polyanions in the PEDOT:PSS electrodes. After examining the thermovoltage, capacitance and charge retention performance of the two ITESCs, it is concluded that PEDOT:PSS is superior to AuNWs as electrodes. Moreover, a new strategy of constructing an ionic thermopile of multiple p- and n-type legs is achieved by series-connecting these legs with same electrolyte but different electrodes. Using interfacial effect at ionic gels/PEDOT:PSS electrode interface, an enhanced thermoelectric effect in ITESCs is obtained, which constitutes one more step towards efficient, low-cost, flexible, and printable ionic thermoelectric modules for energy harvesting.
|
|
| 7. |
- Mardi, Saeed, et al.
(författare)
-
The Interfacial Effect on the Open Circuit Voltage of Ionic Thermoelectric Devices with Conducting Polymer Electrodes
- 2021
-
Ingår i: Advanced Electronic Materials. - : Wiley. - 2199-160X. ; 7:12
-
Tidskriftsartikel (refereegranskat)abstract
- Organic-based energy harvesting devices can contribute to a sustainable solution for the transition to renewable energy sources. The concept of ionic thermoelectrics (iTE) has been recently proposed and motivated by the high values of thermo-voltage in electrolytes. So far, most research has focused on developing new electrolytes with high Seebeck coefficient. Despite the major role of the electrode materials in supercapacitors and batteries, the effect of various electrodes on energy harvesting in iTE devices has not been widely studied. In this work, the conducting polymer poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) is investigated as the functional electrodes in iTE supercapacitors. Through investigating the thermo-voltage of iTEs of the same electrolyte with varying composition of PEDOT electrodes, it is identified that the different PSS content greatly affects the overall thermo-induced voltage coefficient, S-eff (i.e., effective thermopower). The permselective polyanion in the electrode causes cation concentration differences at the electrode/electrolyte interface and contributes to an interfacial potential drop that is temperature dependent. As a result, the overall thermo-voltage of the device possesses both an interfacial and a bulk contribution. The findings extend the fundamental understanding of iTE effect with functional electrodes, which could lead a new direction to enhance the heat-to-electricity conversion.
|
|
| 8. |
- Soffitta, Paolo, et al.
(författare)
-
XIPE : the X-ray imaging polarimetry explorer
- 2013
-
Ingår i: Experimental astronomy. - : Springer Science and Business Media LLC. - 0922-6435 .- 1572-9508. ; 36:3, s. 523-567
-
Tidskriftsartikel (refereegranskat)abstract
- X-ray polarimetry, sometimes alone, and sometimes coupled to spectral and temporal variability measurements and to imaging, allows a wealth of physical phenomena in astrophysics to be studied. X-ray polarimetry investigates the acceleration process, for example, including those typical of magnetic reconnection in solar flares, but also emission in the strong magnetic fields of neutron stars and white dwarfs. It detects scattering in asymmetric structures such as accretion disks and columns, and in the so-called molecular torus and ionization cones. In addition, it allows fundamental physics in regimes of gravity and of magnetic field intensity not accessible to experiments on the Earth to be probed. Finally, models that describe fundamental interactions (e.g. quantum gravity and the extension of the Standard Model) can be tested. We describe in this paper the X-ray Imaging Polarimetry Explorer (XIPE), proposed in June 2012 to the first ESA call for a small mission with a launch in 2017. The proposal was, unfortunately, not selected. To be compliant with this schedule, we designed the payload mostly with existing items. The XIPE proposal takes advantage of the completed phase A of POLARIX for an ASI small mission program that was cancelled, but is different in many aspects: the detectors, the presence of a solar flare polarimeter and photometer and the use of a light platform derived by a mass production for a cluster of satellites. XIPE is composed of two out of the three existing JET-X telescopes with two Gas Pixel Detectors (GPD) filled with a He-DME mixture at their focus. Two additional GPDs filled with a 3-bar Ar-DME mixture always face the Sun to detect polarization from solar flares. The Minimum Detectable Polarization of a 1 mCrab source reaches 14 % in the 2-10 keV band in 10(5) s for pointed observations, and 0.6 % for an X10 class solar flare in the 15-35 keV energy band. The imaging capability is 24 arcsec Half Energy Width (HEW) in a Field of View of 14.7 arcmin x 14.7 arcmin. The spectral resolution is 20 % at 6 keV and the time resolution is 8 mu s. The imaging capabilities of the JET-X optics and of the GPD have been demonstrated by a recent calibration campaign at PANTER X-ray test facility of the Max-Planck-Institut fur extraterrestrische Physik (MPE, Germany). XIPE takes advantage of a low-earth equatorial orbit with Malindi as down-link station and of a Mission Operation Center (MOC) at INPE (Brazil). The data policy is organized with a Core Program that comprises three months of Science Verification Phase and 25 % of net observing time in the following 2 years. A competitive Guest Observer program covers the remaining 75 % of the net observing time.
|
|
