| 1. |
- Abdollahi, Mehdi, 1985, et al.
(författare)
-
Carboxymethyl cellulose-agar biocomposite film activated with summer savory essential oil as an antimicrobial agent
- 2019
-
Ingår i: International Journal of Biological Macromolecules. - : Elsevier BV. - 0141-8130 .- 1879-0003. ; 126, s. 561-568
-
Tidskriftsartikel (refereegranskat)abstract
- Carboxymethyl cellulose (CMC)-agar biocomposite film was developed by a solvent casting method and the effects of summer savory essential oil (SSEO) at 0.5, 1.0 and 1.5% v/v on antimicrobial, microstructural, mechanical and optical properties as well as water sensitivity of the films were studied. Results showed that incorporation of SSEO into the biocomposite film developed active films with good antimicrobial agent growth inhibition activity against Gram-positive bacteria (S. aureus, B. cereus and L. monocytogenes) and less powerfully against Gram-negative bacteria (E. coli). Addition of the SSEO at 1.0 and 1.5% increased microstructural heterogeneity of the films and hence significantly (p < 0.05) increased water vapor permeability of the films while reducing their tensile strength. In contrast, mechanical flexibility and surface hydrophobicity of the films was significantly (p < 0.05) improved as a function of SSEO addition. The active films showed substantially lower swelling ratio compared to the CMC-agar film when 1.5% SSEO was added, but the transparency of the films was reduced. Finally, the results showed that SSEO can act as an antimicrobial agent in combination with CMC-agar film. However, it modifies properties of the film depending on the applied concentration.
|
|
| 2. |
- Lozano, Rafael, et al.
(författare)
-
Measuring progress from 1990 to 2017 and projecting attainment to 2030 of the health-related Sustainable Development Goals for 195 countries and territories: a systematic analysis for the Global Burden of Disease Study 2017
- 2018
-
Ingår i: The Lancet. - : Elsevier. - 1474-547X .- 0140-6736. ; 392:10159, s. 2091-2138
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Efforts to establish the 2015 baseline and monitor early implementation of the UN Sustainable Development Goals (SDGs) highlight both great potential for and threats to improving health by 2030. To fully deliver on the SDG aim of “leaving no one behind”, it is increasingly important to examine the health-related SDGs beyond national-level estimates. As part of the Global Burden of Diseases, Injuries, and Risk Factors Study 2017 (GBD 2017), we measured progress on 41 of 52 health-related SDG indicators and estimated the health-related SDG index for 195 countries and territories for the period 1990–2017, projected indicators to 2030, and analysed global attainment. Methods: We measured progress on 41 health-related SDG indicators from 1990 to 2017, an increase of four indicators since GBD 2016 (new indicators were health worker density, sexual violence by non-intimate partners, population census status, and prevalence of physical and sexual violence [reported separately]). We also improved the measurement of several previously reported indicators. We constructed national-level estimates and, for a subset of health-related SDGs, examined indicator-level differences by sex and Socio-demographic Index (SDI) quintile. We also did subnational assessments of performance for selected countries. To construct the health-related SDG index, we transformed the value for each indicator on a scale of 0–100, with 0 as the 2·5th percentile and 100 as the 97·5th percentile of 1000 draws calculated from 1990 to 2030, and took the geometric mean of the scaled indicators by target. To generate projections through 2030, we used a forecasting framework that drew estimates from the broader GBD study and used weighted averages of indicator-specific and country-specific annualised rates of change from 1990 to 2017 to inform future estimates. We assessed attainment of indicators with defined targets in two ways: first, using mean values projected for 2030, and then using the probability of attainment in 2030 calculated from 1000 draws. We also did a global attainment analysis of the feasibility of attaining SDG targets on the basis of past trends. Using 2015 global averages of indicators with defined SDG targets, we calculated the global annualised rates of change required from 2015 to 2030 to meet these targets, and then identified in what percentiles the required global annualised rates of change fell in the distribution of country-level rates of change from 1990 to 2015. We took the mean of these global percentile values across indicators and applied the past rate of change at this mean global percentile to all health-related SDG indicators, irrespective of target definition, to estimate the equivalent 2030 global average value and percentage change from 2015 to 2030 for each indicator. Findings: The global median health-related SDG index in 2017 was 59·4 (IQR 35·4–67·3), ranging from a low of 11·6 (95% uncertainty interval 9·6–14·0) to a high of 84·9 (83·1–86·7). SDG index values in countries assessed at the subnational level varied substantially, particularly in China and India, although scores in Japan and the UK were more homogeneous. Indicators also varied by SDI quintile and sex, with males having worse outcomes than females for non-communicable disease (NCD) mortality, alcohol use, and smoking, among others. Most countries were projected to have a higher health-related SDG index in 2030 than in 2017, while country-level probabilities of attainment by 2030 varied widely by indicator. Under-5 mortality, neonatal mortality, maternal mortality ratio, and malaria indicators had the most countries with at least 95% probability of target attainment. Other indicators, including NCD mortality and suicide mortality, had no countries projected to meet corresponding SDG targets on the basis of projected mean values for 2030 but showed some probability of attainment by 2030. For some indicators, including child malnutrition, several infectious diseases, and most violence measures, the annualised rates of change required to meet SDG targets far exceeded the pace of progress achieved by any country in the recent past. We found that applying the mean global annualised rate of change to indicators without defined targets would equate to about 19% and 22% reductions in global smoking and alcohol consumption, respectively; a 47% decline in adolescent birth rates; and a more than 85% increase in health worker density per 1000 population by 2030. Interpretation: The GBD study offers a unique, robust platform for monitoring the health-related SDGs across demographic and geographic dimensions. Our findings underscore the importance of increased collection and analysis of disaggregated data and highlight where more deliberate design or targeting of interventions could accelerate progress in attaining the SDGs. Current projections show that many health-related SDG indicators, NCDs, NCD-related risks, and violence-related indicators will require a concerted shift away from what might have driven past gains—curative interventions in the case of NCDs—towards multisectoral, prevention-oriented policy action and investments to achieve SDG aims. Notably, several targets, if they are to be met by 2030, demand a pace of progress that no country has achieved in the recent past. The future is fundamentally uncertain, and no model can fully predict what breakthroughs or events might alter the course of the SDGs. What is clear is that our actions—or inaction—today will ultimately dictate how close the world, collectively, can get to leaving no one behind by 2030.
|
|
| 3. |
|
|
| 4. |
- Abbafati, Cristiana, et al.
(författare)
-
- 2020
-
Tidskriftsartikel (refereegranskat)
|
|
| 5. |
- Abdollahi, Mehdi, 1985, et al.
(författare)
-
Dynamic rheological, microstructural and physicochemical properties of blend fish protein recovered from kilka (Clupeonella cultriventris) and silver carp (Hypophthalmichthys molitrix) by the pH-shift process or washing-based technology
- 2017
-
Ingår i: Food Chemistry. - : Elsevier BV. - 0308-8146 .- 1873-7072. ; 229, s. 695-709
-
Tidskriftsartikel (refereegranskat)abstract
- This study aimed to evaluate how blending pH-shift produced protein isolates from gutted kilka (Clupeonella cultriventris) and silver carp (Hypophthalmichthys molitrix) affected dynamic rheological and chemical properties of the proteins as well as microstructural and physico-mechanical properties of produced gels. Studied variables were protein solubilization pH (acid vs. alkaline) and blending step (before or after protein precipitation). Comparisons were made with conventionally washed minces from kilka and silver carp fillets; either alone or after blending. Rheological studies revealed that blending alkali-produced protein isolates before precipitation resulted in rapid increase of G′ reflecting the formation of intermolecular protein-protein interactions with higher rate. Furthermore, blending of alkali-produced protein isolates and washed minces, respectively, of kilka and silver carp improved physico-mechanical properties of the resultant gels compared to pure kilka proteins. However, the pH-shift method showed higher efficacy in development of blend surimi at the same blending ratio compared to the conventional washing.
|
|
| 6. |
- Abdollahi, Mehdi, 1985, et al.
(författare)
-
Effect of microbial transglutaminase and setting condition on gel properties of blend fish protein isolate recovered by alkaline solubilisation/isoelectric precipitation
- 2019
-
Ingår i: International Journal of Food Science and Technology. - : Wiley. - 1365-2621 .- 0950-5423. ; 54:3, s. 762-770
-
Tidskriftsartikel (refereegranskat)abstract
- The effect of microbial transglutaminase (M‐TGase) (0–0.6 units g−1 sample) and setting condition (25 °C/180 min, 30 °C/120 min, 35 °C/60 min and 40 °C/30 min) on gel properties of blend protein isolate of gutted kilka and silver carp was studied. The protein isolate provided a good substrate for M‐TGase activity so that a low amount of M‐TGase (0.2 unit g−1 sample) substantially improved textural properties and water holding capacity (WHC) of the gels. Breaking force of the gels was positively affected by M‐TGase up to 0.6 unit g−1 sample, but it negatively affected their WHC. Prior setting at 25–35 °C increased the breaking force of proteins compared to directly heated gel, resulting in maximum breaking force at 35 °C/60 min. However, the setting at 40 °C/30 min caused proteolysis, which was reflected in higher amounts of TCA‐soluble peptides and gel weakening. Denser microstructure and higher myosin heavy chain polymerisation observed in the gels which experienced the setting was well correlated with improvement in textural properties.
|
|
| 7. |
- Abdollahi, Mehdi, 1985, et al.
(författare)
-
Improvement of active chitosan film properties with rosemary essential oil for food packaging
- 2012
-
Ingår i: International Journal of Food Science and Technology. - : Wiley. - 1365-2621 .- 0950-5423. ; 47:4, s. 847-853
-
Tidskriftsartikel (refereegranskat)abstract
- Rosemary essential oil (REO) was used to develop an active film from chitosan. The effects of REO concentration (0.5, 1.0 and 1.5% v/v) on film properties were studied by measuring the physical, mechanical and optical properties of the REO‐loaded films. Scanning electron microscopy and Fourier transform infrared (FTIR) spectroscopy were used to study microstructure and the interaction of the chitosan‐based films. The solubility and water gain of the chitosan film decreased about 25% and 85%, respectively, by REO incorporation, up to 1.5% v/v, because of the interaction between hydrophilic groups of chitosan and REO as confirmed by FTIR. It was determined that REO improved the transparency of the films from 4.97 in neat chitosan up to 7.61; moreover, it reduced the films’ light transmission in UV light more than 25%. Films containing REO showed more antibacterial activity and total phenol content. The films containing REO showed potential to be used as active film in food preservation.
|
|
| 8. |
- Abdollahi, Mehdi, 1985, et al.
(författare)
-
Influence of chitosan/clay functional bionanocomposite activated with rosemary essential oil on the shelf life of fresh silver carp
- 2014
-
Ingår i: International Journal of Food Science and Technology. - : Wiley. - 1365-2621 .- 0950-5423. ; 49:3, s. 811-818
-
Tidskriftsartikel (refereegranskat)abstract
- A combination of chitosan biopolymer, nanoclay and rosemary essential oil was prepared as a functional bionanocomposite (FBN). Its ability to improve the shelf life of refrigerated (4 ± 1 °C) silver carp fillets was studied. The fresh fillets were left untreated as a control or coated with chitosan, chitosan/clay bionanocomposite and chitosan/clay/rosemary essential oil (Ch/clay/REO) FBN. Then, they were evaluated for chemical, microbial and sensory properties over 16‐day storage. The samples coated with the FBN had the lowest pH and total volatile basic nitrogen. Ch/clay/REO coating efficiently retarded lipid oxidation by decreasing peroxide, free fatty acid and thiobarbituric acid production in the samples. The coating also reduced total viable and psychrotrophic count of the fillets more than 1.5 log by the end of storage.
|
|
| 9. |
- Abdollahi, Mehdi, 1985, et al.
(författare)
-
Reducing water sensitivity of alginate bio-nanocomposite film using cellulose nanoparticles
- 2013
-
Ingår i: International Journal of Biological Macromolecules. - : Elsevier BV. - 0141-8130 .- 1879-0003. ; 54:1, s. 166-173
-
Tidskriftsartikel (refereegranskat)abstract
- A bio-based nanocomposite was developed by incorporation of cellulose nanoparticles (CN) obtained from sulfuric acid hydrolysis into alginate biopolymer using solution casting method. The effect of CN loading content (1, 3, 5 and 10 wt%) on microstructural, physical, mechanical and optical properties of the nanocomposites were characterized. The results showed that water solubility and water vapor permeability of the nanocomposites decreased by about 40% and 17%, respectively, upon increasing the CN content to 10%. In addition, the crystalline structure of the CN increased surface hydrophobicity of the alginate film by about 98%. The tensile strength value of the composite films increased from 18.03 to 22.4 MPa with increasing NC content from 0 to 5%; but, it decreased with further increase of the filler content. Nevertheless, film transparency decreased with CN incorporation, especially in high level (10%), which suggested the occurrence of partial agglomeration of the fillers at 10% that coincided with microstructural and mechanical results.
|
|
| 10. |
|
|
