1. |
|
|
2. |
|
|
3. |
- Ackerman, I. N., et al.
(författare)
-
Substantial rise in the lifetime risk of primary total knee replacement surgery for osteoarthritis from 2003 to 2013: an international, population-level analysis
- 2017
-
Ingår i: Osteoarthritis and Cartilage. - : Elsevier BV. - 1063-4584. ; 25:4, s. 455-461
-
Tidskriftsartikel (refereegranskat)abstract
- Objective: To estimate and compare the lifetime risk of total knee replacement surgery (TKR) for osteoarthritis (OA) between countries, and over time. Method: Data on primary TKR procedures performed for OA in 2003 and 2013 were extracted from national arthroplasty registries in Australia, Denmark, Finland, Norway and Sweden. Life tables and population data were also obtained for each country. Lifetime risk of TKR was calculated for 2003 and 2013 using registry, life table and population data. Results: Marked international variation in lifetime risk of TKR was evident, with females consistently demonstrating the greatest risk. In 2013, Finland had the highest lifetime risk for females (22.8%, 95% CI 22.5-23.1%) and Australia had the highest risk for males (15.4%, 95% CI 15.1-15.6%). Norway had the lowest lifetime risk for females (9.7%, 95% CI 9.5-9.9%) and males (5.8%, 95% CI 5.6-5.9%) in 2013. All countries showed a significant rise in lifetime risk of TKR for both sexes over the 10-year study period, with the largest increases observed in Australia (females: from 13.6% to 21.1%; males: from 9.8% to 15.4%). Conclusions: Using population-based data, this study identified significant increases in the lifetime risk of TKR in all five countries from 2003 to 2013. Lifetime risk of TKR was as high as 1 in 5 women in Finland, and 1 in 7 males in Australia. These risk estimates quantify the healthcare resource burden of knee OA at the population level, providing an important resource for public health policy development and healthcare planning. (C) 2016 Osteoarthritis Research Society International. Published by Elsevier Ltd. All rights reserved.
|
|
4. |
- Di Benedetto, M. D., et al.
(författare)
-
Networked control
- 2009
-
Ingår i: Handbook of Hybrid Systems Control. - : Cambridge University Press. - 9780521765053
-
Bokkapitel (refereegranskat)
|
|
5. |
- Dowsey, M. M., et al.
(författare)
-
Variations in pain and function before and after total knee arthroplasty : A comparison between Swedish and Australian cohorts
- 2017
-
Ingår i: Osteoarthritis and Cartilage. - : Elsevier BV. - 1063-4584. ; 25:6, s. 885-891
-
Tidskriftsartikel (refereegranskat)abstract
- Objective: Preoperative pain and function is viewed as an important predictor of total knee arthroplasty (TKA) outcomes. We examined whether variations in pain and function outcomes existed at 12 months between two centres in Sweden and Australia, and whether this was explained by variations in patient presentation for TKA. Methods: This was a retrospective analysis of prospectively collected data. Patients from one centre in Australia (St. Vincent's Hospital (SVH), N = 516) and in Sweden (Trelleborg (TBG), N = 899) who underwent primary TKA between 2012 and 2013. The Western Ontario and McMaster Universities Arthritis Index (WOMAC) was analysed pre- and 12 months' post TKA from which non-response to surgery was determined using the OMERACT-OARSI criteria. Multiple linear regression analysis was used to examine the relationship between change in pain and function and surgery centre, adjusting for preoperative patient characteristics and surgical technique. Results: Despite worse preoperative outcomes in all subscales of the WOMAC for the SVH cohort, there were no clinically meaningful differences in 12-month WOMAC subscales nor change in WOMAC subscales between SVH and TBG. Almost identical proportions of patients were considered OMERACT-OARSI responders, 85.7% (SVH) and 85.9% (TBG), however for the SVH cohort 25 (4.9%) were moderate and 417 (80.8%) were high responders, compared to the TBG cohort of which 225 (25%) were moderate and 547 (60.9%) were high responders. Conclusion: Despite differences in preoperative presentation between 2 countries, improvements in pain and function and the proportion of individual who responded to TKA surgery at 1 year were similar. Factors related to poor response to TKA surgery require further elucidation.
|
|
6. |
- Makela, K. T., et al.
(författare)
-
The benefits of collaboration: the Nordic Arthroplasty Register Association
- 2019
-
Ingår i: Efort Open Reviews. - : Bioscientifica. - 2058-5241 .- 2396-7544. ; 4:6, s. 391-400
-
Tidskriftsartikel (refereegranskat)abstract
- The Nordic Arthroplasty Register Association (NARA) was established in 2007 by arthroplasty register representatives from Sweden, Norway and Denmark with the overall aim to improve the quality of research and thereby enhance the possibility for quality improvement with arthroplasty surgery. Finland joined the NARA collaboration in 2010. NARA minimal hip, knee and shoulder datasets were created with variables that all countries can deliver. They are dynamic datasets, currently with 25 variables for hip arthroplasty, 20 for knee arthroplasty and 20 for shoulder arthroplasty. NARA has published statistical guidelines for the analysis of arthroplasty register data. The association is continuously working on the improvement of statistical methods and the application of new ones. There are 31 published peer-reviewed papers based on the NARA databases and 20 ongoing projects in different phases. Several NARA publications have significantly affected clinical practice. For example, metal-on-metal total hip arthroplasty and resurfacing arthroplasty have been abandoned due to increased revision risk based on i.a. NARA reports. Further, the use of uncemented total hip arthroplasty in elderly patients has decreased significantly, especially in Finland, based on the NARA data. The NARA collaboration has been successful because the countries were able to agree on a common dataset and variable definitions. The collaboration was also successful because the group was able to initiate a number of research projects and provide answers to clinically relevant questions. A number of specific goals, set up in 2007, have been achieved and new one has emerged in the process.
|
|
7. |
|
|
8. |
- Badawy, Mona, et al.
(författare)
-
Hospital volume and the risk of revision in Oxford unicompartmental knee arthroplasty in the Nordic countries -an observational study of 14,496 cases
- 2017
-
Ingår i: BMC Musculoskeletal Disorders. - : Springer Science and Business Media LLC. - 1471-2474. ; 18:1
-
Tidskriftsartikel (refereegranskat)abstract
- Background: High procedure volume and dedication to unicompartmental knee arthroplasty (UKA) has been suggested to improve revision rates. This study aimed to quantify the annual hospital volume effect on revision risk in Oxfordu? nicompartmental knee arthroplasty in the Nordic countries. Methods: 14,496 cases of cemented medial Oxford III UKA were identified in 126 hospitals in the four countries included in the Nordic Arthroplasty Register Association (NARA) database from 2000 to 2012. Hospitals were divided by quartiles into 4 annual procedure volume groups (≤11, 12-23, 24-43 and ≥44). The outcome was revision risk after 2 and 10 years calculated using Kaplan Meier method. Multivariate Cox regression analysis was used to assess the Hazard Ratio (HR) of any revision due to specific reasons with 95% confidence intervals (CI). Results: The implant survival was 80% at 10 years in the volume group ≤11 procedures per year compared to 83% in other volume groups. The HR adjusted for age category, sex, year of surgery and nation was 0.87 (95% CI: 0.76-0.99, p = 0.036) for the group 12-23 procedures per year, 0.78 (95% CI: 0.68-0.91, p = 0.002) for the group 24-43 procedures per year and 0.82 (95% CI: 0.70-0.94, p = 0.006) for the group ≥44 procedures per year compared to the low volume group. Log-rank test was p = 0.003. The risk of revision for unexplained pain was 40-50% higher in the low compared with other volume groups. Conclusion: Low volume hospitals performing ≤11 Oxford III UKAs per year were associated with an increased risk of revision compared to higher volume hospitals, and unexplained pain as revision cause was more common in low volume hospitals.
|
|
9. |
- Klöckner, M., et al.
(författare)
-
Bettan – Industrial robot and application for Finja Exakt build system
- 2023
-
Ingår i: Proceedings of the 40th International Symposium on Automation and Robotics in Construction, ISARC 2023. - 2413-5844. - 9780645832204 ; , s. 86-93
-
Konferensbidrag (refereegranskat)abstract
- This paper reports on efforts to create a robotized construction build system, based on the Finja Exakt manual build system. The equipment used is a generic off-the-shelf industrial arm robot integrated with a spindle crane carrier for mobility. The approach offers technical, safety and usability challenges as well as integration and business challenges for placing a generic industrial robot onsite as part of an automation solution. The question we address is if a robotized build system is a viable niche for industrial robotics in construction. In this paper the question is partially answered by reporting on an industrial robot partially adopted for work on a construction site with evaluation of individual processes in a build system.
|
|
10. |
- Klöckner, M., et al.
(författare)
-
Insights into automation of construction process using parallel-kinematic manipulators
- 2022
-
Ingår i: Proceedings of the 39th International Symposium on Automation and Robotics in Construction, ISARC 2022. - 9789526952420 ; , s. 25-32
-
Konferensbidrag (refereegranskat)abstract
- This paper discusses challenges, experiences and lessons learned so far while transforming a masonry build system based mostly on manual labour into a robot automated build system. Our motivation for selection of this masonry process is to try out how robot automation could impact the architects in their design work by providing a tool to directly manipulate wall expression down to individual brick level. Such manipulation is often much too costly for manual labour today. Moreover, masonry is a challenging application to automate. Understanding the manual processes involved and transforming them into automation equivalents faces several challenges; among them handling and distribution of the different materials involved, selection of tooling, sensing for handling of variation and digital tooling for the programming of the process. A novel parallel-kinematic manipulator (PKM) with computerized numerical control (CNC) is used as target for experiments, because the performance properties in stiffness, workspace and accuracy will allow us to extend work into further construction processes involving heavy and dirty manual labour.
|
|