| 1. |
|
|
| 2. |
- Gomaa, M. M., et al.
(författare)
-
Exploring NiO nanosize structures for ammonia sensing
- 2018
-
Ingår i: Journal of materials science. Materials in electronics. - : SPRINGER. - 0957-4522 .- 1573-482X. ; 29:14, s. 11870-11877
-
Tidskriftsartikel (refereegranskat)abstract
- Efficient ammonia gas sensor devices were fabricated based on nickel oxide (NiO) nanostructures films. Two chemical synthesis approaches were used: chemical spray pyrolysis (CSP) and chemical bath deposition (CBD), aiming at obtaining highly developed surface area and high chemical reactivity of NiO. Crystal structure, morphology, and composition of NiO films and nanostructures were investigated by scanning electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. CSP method results in the synthesis of NiO films with pure cubic crystalline structure of preferred orientation along (111) direction. The type of the precursors used (nickel acetate, nickel chloride and nickel nitrate) affects the morphology and crystallites average size of the deposited films. CBD method consisted of two stages: (i) deposition of nickel hydroxide phase and (ii) thermal annealing of nickel hydroxide at 450 A degrees C in air for 4 h. Resulted structures were nanoflakes, vertically arranged in a "wall-like" morphology. Fabricated structures were found to be sensitive to ammonia differently, depending on the synthesis approach and material morphology. NiO films deposited by CBD demonstrated a stable response to ammonia with maximum magnitude at the operating temperature of 300 A degrees C. The highest average response for the CBD-NiO sample was 114.3-141.3% for 25 and 150 ppm NH3, respectively, whereas the response range observed for the film processed by spray pyrolysis using nickel chloride was 31.7-142.5% for 25 and 150 ppm NH3, respectively.
|
|
| 3. |
- Kaushik, Priya Darshni, et al.
(författare)
-
Surface functionalization of epitaxial graphene using ion implantation for sensing and optical applications
- 2020
-
Ingår i: Carbon. - : PERGAMON-ELSEVIER SCIENCE LTD. - 0008-6223 .- 1873-3891. ; 157, s. 169-184
-
Tidskriftsartikel (refereegranskat)abstract
- Surface functionalization has been shown to allow tailoring of graphene lattice thus making it suitable for different applications like sensing, supercapacitance devices, drug delivery system and memory devices. In this work, surface functionalization of epitaxial graphene on SiC (EG/SiC) was done by ion beam technology (30 keV Ag- ions at fluences ranging from 5 x 10(12) ions/cm(2) to 5 x 10(14) ions/cm(2)), which is one of the most precise techniques for introducing modifications in materials. Atomic force microscopy showed presence of nanostructures in ion implanted samples and Photoluminescence and X-ray photoelectron spectroscopy revealed that these are probably silicon oxy carbide. High-resolution transmission electron microscopy (HRTEM) showed decoupling of buffer layer from SiC substrate at many places in ion implanted samples. Further, HRTEM and Raman spectroscopy showed amorphization of both graphene and SiC at highest fluence. Fluence dependent increase in absorbance and resistance was observed. Gas sensors fabricated on pristine and ion implanted samples were able to respond to low concentration (50 ppb) of NO2 and NH3 gases. Detecting NH3 gas at low concentration further provides a simple platform for fabricating highly sensitive urea biosensor. We observed response inversion with increasing fluence along with presence of an optimal fluence, which maximized gas sensitivity of EG/SiC. (C) 2019 Elsevier Ltd. All rights reserved.
|
|
| 4. |
- Kazemi, Amin, et al.
(författare)
-
The effect of Cl- and N-doped MoS2 and WS2 coated on epitaxial graphene in gas-sensing applications
- 2021
-
Ingår i: SURFACES AND INTERFACES. - : ELSEVIER. - 2468-0230. ; 25
-
Tidskriftsartikel (refereegranskat)abstract
- In this study, epitaxial graphene (EG) was grown on a 6H-SiC (0001) substrate via the thermal decomposition of SiC. Undoped and Cl- or N-doped molybdenum disulfide (MoS2) and tungsten disulfide (WS2) ultrathin films were spin-coated on the graphene surface. The scanning electron microscopy (SEM) images and topological atomic force microscopy (AFM) analysis showed good distribution of thin MoS2 and WS2 flakes on the EG surface. The X-ray photoelectron spectroscopy (XPS) confirmed the presence of Mo-related peaks of 3d(5/2) and 3d(3/2) at similar to 232.2 eV and 235.1 eV, respectively. It also represented peaks of W 4f(7/2) and 5p(5/2) at around 36.1 eV and 37.9 eV, respectively. Moreover, XPS results showed peaks at around 167.4 eV and 168.4 eV corresponding to S 2p for MoS2 and WS2, respectively. The XPS results also confirmed the presence of dopant elements in MoS2 and WS2 flakes. We fabricated sensors using undoped and chlorine- or nitrogen-doped MoS2 and WS2 ultrathin films for gas-sensing applications. These sensors were surveyed for ammonia (NH3) and nitrogen dioxide (NO2) gas sensing. As in NO2, both undoped sensors react with a decrease in relative sensor responses to NH3, hence showing n-type behavior. Doping MoS2 and WS2 with chlorine led to a higher response vis-a-vis the nitrogendoped sensors. The absolute relative response of Cl-doped WS2 and MoS2 was about 3.5 and 1.8 times more than that of their undoped counterparts toward NH3. A change of direction with a slightly smaller response (approximately x 0.8), however, could also be observed in the doping of MoS2 and WS2 with nitrogen. When exposed to NO2, the Cl-doped WS2 sensor response was 1.2 more than the N-doped one, while for MoS2 these values changed in the range of 1.2 - 1.6 for different flows of gas.
|
|
| 5. |
- Kim, Kyung Ho, 1984, et al.
(författare)
-
Chemical Sensing with Atomically Thin Platinum Templated by a 2D Insulator
- 2020
-
Ingår i: Advanced Materials Interfaces. - : Wiley. - 2196-7350. ; 7:12
-
Tidskriftsartikel (refereegranskat)abstract
- Boosting the sensitivity of solid‐state gas sensors by incorporating nanostructured materials as the active sensing element can be complicated by interfacial effects. Interfaces at nanoparticles, grains, or contacts may result in nonlinear current–voltage response, high electrical resistance, and ultimately, electric noise that limits the sensor read‐out. This work reports the possibility to prepare nominally one atom thin, electrically continuous platinum layers by physical vapor deposition on the carbon zero layer (also known as the buffer layer) grown epitaxially on silicon carbide. With a 3–4 Å thin Pt layer, the electrical conductivity of the metal is strongly modulated when interacting with chemical analytes, due to charges being transferred to/from Pt. The strong interaction with chemical species, together with the scalability of the material, enables the fabrication of chemiresistor devices for electrical read‐out of chemical species with sub part‐per‐billion (ppb) detection limits. The 2D system formed by atomically thin Pt on the carbon zero layer on SiC opens up a route for resilient and high sensitivity chemical detection, and can be the path for designing new heterogenous catalysts with superior activity and selectivity.
|
|
| 6. |
- Rodner, Marius, 1991-, et al.
(författare)
-
A platform for extremely sensitive gas sensing : 2D materials on silicon carbide
- 2018
-
Ingår i: TechConnect Briefs 2018 - Advanced Materials. - : TechConnect. - 9780998878232 ; , s. 101-104
-
Konferensbidrag (refereegranskat)abstract
- 2D materials offer a unique platform for sensing with extreme sensitivity, since minimal chemical interactions cause noticeable changes in the electronic state. An area where this is particularly interesting is environmental monitoring of gases that are hazardous at trace levels. In this study, SiC is used as a base for epitaxial growth of high quality, uniform graphene, and for templated growth of atomically thin layers of platinum, with potential benefits in terms of the ability to operate at higher temperature and to serve as a more robust template for fiinctionalization compared to graphene. Fiinctionalization with nanoparticles allows tuning the sensitivity to specific molecules without damaging the 2D sensor transducer. With this platform we demonstrate detection of nitrogen dioxide, formaldehyde, and benzene at trace concentrations. This, combined with smart sensor signal evaluation allowing fast response times, could allow real-time monitoring of these toxic pollutants at concentrations of relevance to air quality monitoring.
|
|
| 7. |
- Rodner, Marius, et al.
(författare)
-
Enabling a new method of dynamic field-effect gas sensor operation through lithium-doped tungsten oxide
- 2019
-
Ingår i: JOURNAL OF SENSORS AND SENSOR SYSTEMS. - : COPERNICUS GESELLSCHAFT MBH. - 2194-8771 .- 2194-878X. ; 8:2, s. 261-267
-
Tidskriftsartikel (refereegranskat)abstract
- To fulfil todays requirements, gas sensors have to become more and more sensitive and selective. Temperature-cycled operation has long been used to enhance the sensitivity and selectivity of metal-oxide semiconductor gas sensors and, more recently, silicon-carbide-based, gas-sensitive field-effect transistors (SiC-FETs). In this work, we present a novel method to significantly enhance the effect of gate bias on a SiC-FETs response, giving rise to new possibilities for static and transient signal generation and, thus, increased sensitivity and selectivity. A tungsten trioxide (WO3) layer is deposited via pulsed laser deposition as an oxide layer beneath a porous iridium gate, and is doped with 0.1 AT% of lithium cations. Tests with ammonia as a well-characterized model gas show a relaxation effect with a time constant between 20 and 30 s after a gate bias step as well as significantly increased response and sensitivity at +/- 2V compared to 0V. We propose an electric field-mediated change in oxygen surface coverage as the cause of this novel effect.
|
|
| 8. |
- Rodner, Marius, 1991-, et al.
(författare)
-
First-order time-derivative readout of epitaxial graphene-based gas sensors for fast analyte determination
- 2020
-
Ingår i: Sensors and Actuators Reports. - : ELSEVIER. - 2666-0539. ; 2:1
-
Tidskriftsartikel (refereegranskat)abstract
- For many applications, gas sensors need to be very sensitive, selective and exhibit a good stability. Moreover, they should also be cheap and small, and allow a fast response time. Usually, sensors are optimized for specific applications with a compromise between the mentioned criteria. Here, we show a method that allows very sensitive, but rather slow, graphene metal oxide hybrid sensors to be used in a much faster and more effective way with a focus on targeting trace level concentrations of some common toxic air pollutants. By exploiting the first-order time-derivative of the measured resistance signal after a concentration step, the response peak is achieved much faster, while also being more robust against sensor exposure and relaxation times, and concomitantly maintaining the very high sensitivities inherent to graphene. We propose to use this method to generate an additional signal to allow using sensors that are normally rather slow in applications where steep concentration changes need to be detected with much faster time constants.
|
|
| 9. |
- Rodner, Marius, 1991-
(författare)
-
Functionalized epitaxial graphene as versatile platform for air quality sensors
- 2021
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The work presented in this thesis focuses on epitaxial graphene on SiC as a platform for air quality sensors. Several approaches have been tested and evaluated to increase the sensitivity, selectivity, speed of response and stability of the sensors. The graphene surfaces have been functionalized, for example, with different metal oxide nanoparticles and nanolayers using hollow-cathode sputtering and pulsed laser deposition. The modified surfaces were investigated towards topography, integrity and chemical composition with characterization methods such as atomic force microscopy and Raman spectroscopy. Interaction energies between several analytes and nanoparticle-graphene-combinations were calculated by density functional theory to find the optimal material for specific target gases, and to verify the usefulness of this approach. The impact of environmental influences such as operating temperature, relative humidity and UV irradiation on sensing properties was investigated as well. To further enhance sensor performances, the first-order time-derivative of the sensor’s resistance was introduced to speed up sensor response and a temperature cycled operation mode was investigated towards selectivity.Applying these methods in laboratory conditions, sensors with a quantitative readout of single ppb benzene and formaldehyde were developed. These results show promise to fill the existing gap of low-cost but highly sensitive and fast gas sensors for air quality monitoring.
|
|
| 10. |
- Rodner, Marius, et al.
(författare)
-
Graphene Decorated with Iron Oxide Nanoparticles for Highly Sensitive Interaction with Volatile Organic Compounds
- 2019
-
Ingår i: Sensors. - : MDPI. - 1424-8220. ; 19:4
-
Tidskriftsartikel (refereegranskat)abstract
- Gases, such as nitrogen dioxide, formaldehyde and benzene, are toxic even at very low concentrations. However, so far there are no low-cost sensors available with sufficiently low detection limits and desired response times, which are able to detect them in the ranges relevant for air quality control. In this work, we address both, detection of small gas amounts and fast response times, using epitaxially grown graphene decorated with iron oxide nanoparticles. This hybrid surface is used as a sensing layer to detect formaldehyde and benzene at concentrations of relevance (low parts per billion). The performance enhancement was additionally validated using density functional theory calculations to see the effect of decoration on binding energies between the gas molecules and the sensor surface. Moreover, the time constants can be drastically reduced using a derivative sensor signal readout, allowing the sensor to work at detection limits and sampling rates desired for air quality monitoring applications.
|
|
