| 1. |
- Bakhit, Babak, et al.
(författare)
-
Improving the high-temperature oxidation resistance of TiB2 thin films by alloying with Al
- 2020
-
Ingår i: Acta Materialia. - : PERGAMON-ELSEVIER SCIENCE LTD. - 1359-6454 .- 1873-2453. ; 196, s. 677-689
-
Tidskriftsartikel (refereegranskat)abstract
- Refractory transition-metal diborides (TMB2) are candidates for extreme environments due to melting points above 3000 degrees C, excellent hardness, good chemical stability, and thermal and electrical conductivity. However, they typically suffer from rapid high-temperature oxidation. Here, we study the effect of Al addition on the oxidation properties of sputter-deposited TiB2-rich Ti1-xAlxBy thin films and demonstrate that alloying the films with Al significantly increases the oxidation resistance with a slight decrease in hardness. TiB2.4 layers are deposited by dc magnetron sputtering (DCMS) from a TiB2 target, while Ti1-xAlxBy alloy films are grown by hybrid high-power impulse and dc magnetron co-sputtering (Al-HiPIMS/TiB2-DCMS). All as-deposited films exhibit columnar structure. The column boundaries of TiB2.4 are B-rich, while Ti0.68Al0.32B1.35 alloys have Ti-rich columns surrounded by a Ti(1-x)Al(x)By tissue phase which is predominantly Al rich. Air-annealing TiB2.4 at temperatures above 500 degrees C leads to the formation of oxide scales that do not contain B and mostly consist of a rutile-TiO2 (s) phase. The resulting oxidation products are highly porous due to the evaporation of B2O3 (g) phase as well as the coarsening of TiO2 crystallites. This poor oxidation resistance is significantly improved by alloying with Al. While air-annealing at 800 degrees C for 0.5 h results in the formation of an similar to 1900-nm oxide scale on TiB2.4, the thickness of the scale formed on the Ti0.68Al0.32B1.35 alloys is similar to 470 nm. The enhanced oxidation resistance is attributed to the formation of a dense, protective Al-containing oxide scale that considerably decreases the oxygen diffusion rate by suppressing the oxide-crystallites coarsening. (C) 2020 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
|
|
| 2. |
- Dahlqvist, Martin, et al.
(författare)
-
Out-Of-Plane Ordered Laminate Borides and Their 2D Ti-Based Derivative from Chemical Exfoliation
- 2021
-
Ingår i: Advanced Materials. - : Wiley-VCH Verlagsgesellschaft. - 0935-9648 .- 1521-4095. ; 33:38
-
Tidskriftsartikel (refereegranskat)abstract
- Exploratory theoretical predictions in uncharted structural and compositional space are integral to materials discoveries. Inspired by M5SiB2 (T2) phases, the finding of a family of laminated quaternary metal borides, M M-4 SiB2, with out-of-plane chemical order is reported here. 11 chemically ordered phases as well as 40 solid solutions, introducing four elements previously not observed in these borides are predicted. The predictions are experimentally verified for Ti4MoSiB2, establishing Ti as part of the T2 boride compositional space. Chemical exfoliation of Ti4MoSiB2 and select removal of Si and MoB2 sub-layers is validated by derivation of a 2D material, TiOxCly, of high yield and in the form of delaminated sheets. These sheets have an experimentally determined direct band gap of approximate to 4.1 eV, and display characteristics suitable for supercapacitor applications. The results take the concept of chemical exfoliation beyond currently available 2D materials, and expands the envelope of 3D and 2D candidates, and their applications.
|
|
| 3. |
- Dorri, Megan, et al.
(författare)
-
Synthesis and characterization of CrB 2 thin films grown by DC magnetron sputtering
- 2021
-
Ingår i: Scripta Materialia. - : Pergamon-Elsevier Science Ltd. - 1359-6462 .- 1872-8456. ; 200
-
Tidskriftsartikel (refereegranskat)abstract
- CrB x thin films with 1.90 < x < 2.08 have been deposited by direct-current magnetron sputtering (DCMS) from a stoichiometric CrB 2 target at 5 and 20 mTorr (0.67 and 2.67 Pa) Ar pressure onto sapphire (0 0 01) substrates. All films, irrespective of deposition conditions, exhibit a (0 0 01) texture. Attesting to the achievement of close-to-stoichiometric composition, epitaxial film growth is observed at 900 ?C, while film growth at 500 ?C yields (0001) fiber texture. Film composition does not depend on substrate temperature but exhibits slightly reduced B content with increasing pressure for samples deposited at 900 ?C. Excess B in the overstoichiometric epitaxial CrB 2.08 films segregates to form B-rich inclusions. Understoichiometry in CrB 1.90 films is accommodated by Cr-rich stacking faults on { 1 1? 00 } prismatic planes. ? 2021 The Author(s). Published by Elsevier Ltd on behalf of Acta Materialia Inc. This is an open access article under the CC BY license ( http://creativecommons.org/licenses/by/4.0/ )
|
|
| 4. |
- Halim, Joseph, et al.
(författare)
-
Experimental and Theoretical Investigations of Out-of-Plane Ordered Nanolaminate Transition Metal Borides: M4CrSiB2 (M = Mo, W, Nb)
- 2023
-
Ingår i: Inorganic Chemistry. - : American Chemical Society (ACS). - 0020-1669 .- 1520-510X. ; 62:14, s. 5341-5347
-
Tidskriftsartikel (refereegranskat)abstract
- We report the synthesis of three out-of-plane chemically ordered quaternary transition metal borides (o-MAB phases) of the chemical formula M4CrSiB2 (M = Mo, W, Nb). The addition of these phases to the recently discovered o-MAB phase Ti4MoSiB2 shows that this is indeed a new family of chemically ordered atomic laminates. Furthermore, our results expand the attainable chemistry of the traditional M5SiB2 MAB phases to also include Cr. The crystal structure and chemical ordering of the produced materials were investigated using high-resolution scanning transmission electron microscopy and X-ray diffraction by applying Rietveld refinement. Additionally, calculations based on density functional theory were performed to investigate the Cr preference for occupying the minority 4c Wyckoff site, thereby inducing chemical order.
|
|
| 5. |
- Halim, Joseph, 1985-, et al.
(författare)
-
Synthesis of Two-Dimensional Nb1.33C (MXene) with Randomly Distributed Vacancies by Etching of the Quaternary Solid Solution (Nb2/3Sc1/3)2AlC MAX Phase
- 2018
-
Ingår i: ACS Applied Nano Materials. - : American Chemical Society (ACS). - 2574-0970. ; 1:6, s. 2455-2460
-
Tidskriftsartikel (refereegranskat)abstract
- Introducing point defects in two-dimensional (2D) materials can alter or enhance their properties. Here, we demonstrate how etching a laminated (Nb2/3Sc1/3)2AlC MAX phase (solid solution) of both the Sc and Al atoms results in a 2D Nb1.33C material (MXene) with a large number of vacancies and vacancy clusters. This method is applicable to any quaternary, or higher, MAX phase, wherein one of the transition metals is more reactive than the other and could be of vital importance in applications such as catalysis and energy storage. We also report, for the first time, on the existence of solid solution (Nb2/3Sc1/3)3AlC2 and (Nb2/3Sc1/3)4AlC3 phases.
|
|
| 6. |
- Hellgren, Niklas, et al.
(författare)
-
High-power impulse magnetron sputter deposition of TiBx thin films : Effects of pressure and growth temperature
- 2019
-
Ingår i: Vacuum. - : PERGAMON-ELSEVIER SCIENCE LTD. - 0042-207X .- 1879-2715. ; 169
-
Tidskriftsartikel (refereegranskat)abstract
- Titanium boride, TiBx thin films are grown in pure Ar discharges by high-power impulse magnetron sputtering (HiPIMS) from a compound TiB2 target Film compositions are determined by time-of-flight elastic recoil detection analysis and Rutherford backscattering spectrometry as a function of deposition temperature (T-s = 25-900 degrees C) and Ar pressure (p(Ar) = 0.67-2.67 Pa, 5-20 mTorr). For reference, films are also grown by direct current magnetron sputtering (dcMS) under similar conditions. The HiPIMS waveform, average target power P-T, and resulting film compositions are strongly dependent not only on P-Ar, but also on T-s. At high pressures the effect of varying T-s on P-T is minimal, while at lower P-Ar the effect of T-s is more pronounced, due to substrate-temperature-induced gas rarefaction. Films grown by HiPIMS at 0.67 Pa are understoichiometric, with B/Ti = 1.4-1.5, while at 2.67 Pa, B/Ti decreases from 2.4 to 1.4 as T-s increases from 25 to 900 degrees C. dcMS-deposited films are overstoichiometric (B/Ti similar or equal to 3) when grown at low pressures, and near-stoichiometric (B/Ti similar or equal to r 1.9-2.2) for higher P-Ar. All experimental results are explained by differences in the ionization potentials of sputtered Ti and B atoms, together with P-Ar- and T-s-dependent gas-phase scattering.
|
|
| 7. |
- Meshkian, Rahele, et al.
(författare)
-
Theoretical Analysis, Synthesis, and Characterization of 2D W1.33C (MXene) with Ordered Vacancies
- 2019
-
Ingår i: ACS APPLIED NANO MATERIALS. - : AMER CHEMICAL SOC. - 2574-0970. ; 2:10, s. 6209-6219
-
Tidskriftsartikel (refereegranskat)abstract
- Synthesis of delaminated 2D W1.33C (MXene) has been performed by selectively etching Al as well as Sc/Y from the recently discovered nanolaminated i-MAX phases (W2/3Sc1/3)(2)AlC and (W2/3Y1/3)(2)AlC. Both quaternary phases produce MXenes with similar flake morphology and with a skeletal structure due to formation of ordered vacancies. The measured O, OH, and F terminations, however, differ in amount as well as in relative ratios, depending on parent material, evident from X-ray photoelectron spectroscopy. These findings are correlated to theoretical simulations based on first-principles, investigating the W1.33C, and the effect of termination configurations on structure, formation energy, stability, and electronic structure. The theoretical results indicate a favored F-rich surface composition, though with a system going from insulating/semiconducting to metallic for different termination configurations, suggesting a high tuning potential of these materials. Additionally, free-standing W1.33C films of 2-4 mu m thickness and with up to 10 wt % polymer (PEDOT:PSS) were tested as electrodes in supercapacitors, showing capacitances up to 600 F cm(-3) in 1 M H2SO4 and high capacitance retention for at least 10000 cycles at 10 A g(-1). This is highly promising results compared to other W-based materials to date.
|
|
| 8. |
- Meshkian, Rahele, et al.
(författare)
-
W-Based Atomic Laminates and Their 2D Derivative W1.33C MXene with Vacancy Ordering
- 2018
-
Ingår i: Advanced Materials. - : Wiley. - 0935-9648 .- 1521-4095. ; 30:21
-
Tidskriftsartikel (refereegranskat)abstract
- Structural design on the atomic level can provide novel chemistries of hybrid MAX phases and their MXenes. Herein, density functional theory is used to predict phase stability of quaternary i-MAX phases with in-plane chemical order and a general chemistry (W 2/3 M 2 1/3 ) 2 AC, where M 2 = Sc, Y (W), and A = Al, Si, Ga, Ge, In, and Sn. Of over 18 compositions probed, only two—with a monoclinic C2/c structure—are predicted to be stable: (W 2/3 Sc 1/3 ) 2 AlC and (W 2/3 Y 1/3 ) 2 AlC and indeed found to exist. Selectively etching the Al and Sc/Y atoms from these 3D laminates results in W 1.33 C-based MXene sheets with ordered metal divacancies. Using electrochemical experiments, this MXene is shown to be a new, promising catalyst for the hydrogen evolution reaction. The addition of yet one more element, W, to the stable of M elements known to form MAX phases, and the synthesis of a pure W-based MXene establishes that the etching of i-MAX phases is a fruitful path for creating new MXene chemistries that has hitherto been not possible, a fact that perforce increases the potential of tuning MXene properties for myriad applications.
|
|
| 9. |
- Nygård, K., et al.
(författare)
-
ForMAX – a beamline for multiscale and multimodal structural characterization of hierarchical materials
- 2024
-
Ingår i: Journal of Synchrotron Radiation. - : International Union of Crystallography (IUCr). - 0909-0495 .- 1600-5775. ; 31:Pt 2, s. 363-377
-
Tidskriftsartikel (refereegranskat)abstract
- The ForMAX beamline at the MAX IV Laboratory provides multiscale and multimodal structural characterization of hierarchical materials in the nanometre to millimetre range by combining small- and wide-angle X-ray scattering with full-field microtomography. The modular design of the beamline is optimized for easy switching between different experimental modalities. The beamline has a special focus on the development of novel fibrous materials from forest resources, but it is also well suited for studies within, for example, food science and biomedical research.
|
|
| 10. |
- Nyholm, Per-Georg, 1958, et al.
(författare)
-
The use of a genetic algorithm search for molecular mechanics (MM3)-based conformational analysis of oligosaccharides.
- 2005
-
Ingår i: Carbohydrate Research. - : Elsevier BV. - 0008-6215 .- 1873-426X. ; 340:5, s. 1059-1064
-
Tidskriftsartikel (refereegranskat)abstract
- We have implemented a system called glygal that can perform conformational searches on oligosaccharides using several different genetic algorithm (GA) search methods. The searches are performed in the torsion angle conformational space, considering both the primary glycosidic linkages as well as the pendant groups (C-5–C-6 and hydroxyl groups) where energy calculations are performed using the MM3(96) force field. The system includes a graphical user interface for setting calculation parameters and incorporates a 3D molecular viewer. The system was tested using dozens of structures and we present two case studies for two previously investigated O-specific oligosaccharides of the Shigella dysenteriae type 2 and 4. The results obtained using glygal show a significant reduction in the number of structures that need to be sampled in order to find the best conformation, as compared to filtered systematic search.
|
|
