| 1. |
- Abrikossova, Natalia, 1965-
(författare)
-
Investigation of nanoparticle-cell interactions for development of next generation of biocompatible MRI contrast agents
- 2018
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Progress in synthesis technologies and advances in fundamental understanding of materials with low dimensionality has led to the birth of a new scientific field, nanoscience, and to strong expectations of multiple applications of nanomaterials. The physical properties of small particles are unique, bridging the gap between atoms and molecules, on one side, and bulk materials on the other side. The work presented in this thesis investigates the potential of using magnetic nanoparticles as the next generation of contrast agents for biomedical imaging. The focus is on gadolinium-based nanoparticles and cellular activity including the uptake, morphology and production of reactive oxygen species.Gd ion complexes, like Gd chelates, are used today in the clinic, world-wide. However, there is a need for novel agents, with improved contrast capabilities and increased biocompatibility. One avenue in their design is based on crystalline nanoparticles. It allows to reduce the total number of Gd ions needed for an examination. This can be done by nanotechnology, which allows one to improve and fine tune the physico- chemical properties on the nanomaterial in use, and to increase the number of Gd atoms at a specific site that interact with protons and thereby locally increase the signal. In the present work, synthesis, purification and surface modification of crystalline Gd2O3-based nanoparticles have been performed. The nanoparticles are selected on the basis of their physical properties, that is they show enhanced magnetic properties and therefore may be of high potential interest for applications as contrast agents.The main synthesis method of Gd2O3 nanoparticles in this work was the modified “polyol” route, followed by purification of as-synthesized DEG-Gd2O3 nanoparticles suspensions. In most cases the purification step involved dialysis of the nanoparticle samples. In this thesis, organosilane were chosen as an exchange agent for further functionalization. Moreover, several paths have been explored for modification of the nanoparticles, including Tb3+ doping and capping with sorbitol.Biocompatibility of the newly designed nanoparticles is a prerequisite for their use in medical applications. Its evaluation is a complex process involving a wide range of biological phenomena. A promising path adopted in this work is to study of nanoparticle interactions with isolated blood cells. In this way one could screen nanomaterial prior to animal studies.The primary cell type considered in the thesis are polymorphonuclear neutrophils (PMN) which represent a type of the cells of human blood belonging to the granulocyte family of leukocytes. PMNs act as the first defense of the immune system against invading pathogens, which makes them valuable for studies of biocompatibility of newly synthesized nanoparticles. In addition, an immortalized murine alveolar macrophage cell line (MH-S), THP-1 cell line, and Ba/F3 murine bone marrow-derived cell line were considered to investigate the optimization of the cell uptake and to examine the potential of new intracellular contrast agent for magnetic resonance imaging. In paper I, the nanoparticles were investigated in a cellular system, as potential probes for visualization and targeting intended for bioimaging applications. The production of reactive oxygen species (ROS) by means of luminol-dependent chemiluminescence from human neutrophils was studied in presence of Gd2O3 nanoparticles. In paper II, a new design of functionalized ultra-small rare earth-based nanoparticles was reported. The synthesis was done using polyol method followed by PEGylation, and dialysis. Supersmall gadolinium oxide (DEG-Gd2O3) nanoparticles, in the range of 3-5 nm were obtained and carefully characterized. Neutrophil activation after exposure to this nanomaterial was studied by means of fluorescence microscopy. In paper III, cell labeling with Gd2O3 nanoparticles in hematopoietic cells was monitored by magnetic resonance imaging (MRI). In paper IV, ultra-small gadolinium oxide nanoparticles doped with terbium ions were synthesized as a potentially bifunctional material with both fluorescent and magnetic contrast agent properties. Paramagnetic behavior was studied. MRI contrast enhancement was received, and the luminescent/ fluorescent property of the particles was attributable to the Tb3+ ion located on the crystal lattice of the Gd2O3 host. Fluorescent labeling of living cells was obtained. In manuscript V, neutrophil granulocytes were investigated with rapid cell signaling communicative processes in time frame of minutes, and their response to cerium-oxide based nanoparticles were monitored using capacitive sensors based on Lab-on-a-chip technology. This showed the potential of label free method used to measure oxidative stress of neutrophil granulocytes. In manuscript VI, investigations of cell-(DEGGd2O3) nanoparticle interactions were carried out. Plain (DEG-Gd2O3) nanoparticles, (DEG-Gd2O3) nanoparticles in presence of sorbitol and (DEG-Gd2O3) nanoparticles capped with sorbitol were studied. Relaxation studies and measurements of the reactive oxygen species production by neutrophils were based on chemiluminescence. Cell morphology was evaluated as a parameter of the nanoparticle induced inflammatory response by means of the fluorescence microscopy.The thesis demonstrates high potential of novel Gd2O3-based nanoparticles for development of the next generation contrast agents, that is to find biocompatible compounds with high relaxivity that can be detected at lower doses, and in the future enable targeting to provide great local contrast.
|
|
| 2. |
- Alijagic, Andi, 1992-, et al.
(författare)
-
A Novel Nanosafety Approach Using Cell Painting, Metabolomics, and Lipidomics Captures the Cellular and Molecular Phenotypes Induced by the Unintentionally Formed Metal-Based (Nano)Particles
- 2023
-
Ingår i: Cells. - : MDPI. - 2073-4409. ; 12:2
-
Tidskriftsartikel (refereegranskat)abstract
- Additive manufacturing (AM) or industrial 3D printing uses cutting-edge technologies and materials to produce a variety of complex products. However, the effects of the unintentionally emitted AM (nano)particles (AMPs) on human cells following inhalation, require further investigations. The physicochemical characterization of the AMPs, extracted from the filter of a Laser Powder Bed Fusion (L-PBF) 3D printer of iron-based materials, disclosed their complexity, in terms of size, shape, and chemistry. Cell Painting, a high-content screening (HCS) assay, was used to detect the subtle morphological changes elicited by the AMPs at the single cell resolution. The profiling of the cell morphological phenotypes, disclosed prominent concentration-dependent effects on the cytoskeleton, mitochondria, and the membranous structures of the cell. Furthermore, lipidomics confirmed that the AMPs induced the extensive membrane remodeling in the lung epithelial and macrophage co-culture cell model. To further elucidate the biological mechanisms of action, the targeted metabolomics unveiled several inflammation-related metabolites regulating the cell response to the AMP exposure. Overall, the AMP exposure led to the internalization, oxidative stress, cytoskeleton disruption, mitochondrial activation, membrane remodeling, and metabolic reprogramming of the lung epithelial cells and macrophages. We propose the approach of integrating Cell Painting with metabolomics and lipidomics, as an advanced nanosafety methodology, increasing the ability to capture the cellular and molecular phenotypes and the relevant biological mechanisms to the (nano)particle exposure.
|
|
| 3. |
|
|
| 4. |
- Alijagic, Andi, 1992-, et al.
(författare)
-
Characteristics and health risks of the inhalable fraction of metal additive manufacturing powders
- 2024
-
Ingår i: Nano Select. - : Wiley-VCH Verlagsgesellschaft. - 2688-4011. ; 5:4
-
Tidskriftsartikel (refereegranskat)abstract
- Metal additive manufacturing (AM) is gaining traction but raises worker health concerns due to micron-sized powders, including fine inhalable particles. This study explored particle and surface characteristics, electrochemical properties, metal release in artificial lysosomal fluid (ALF), and potential toxicity of virgin and sieved virgin Fe-based powders, stainless steel (316L), Fe, and two tooling steels. Virgin particles ranged in size from 1 to 100μm, while sieved particles were within the respirable size range (<5–10μm). Surface oxide composition differed from bulk composition. The Fe powder showed low corrosion resistance and high metal release due to a lack of protective surface oxide. Sieved particles of 316L, Fe, and one tooling steel released more metals into ALF than virgin particles, with the opposite was observed for the other tooling steel. Sieved particles had no notable impact on cell viability or micronuclei formation in human bronchial epithelial cells. Inflammatory response in human macrophages was generally low, except for the Fe powder and one tooling steel, which induced increased interleukin-8 (IL-8/CXCL-8) and monocyte chemoattractant protein-1 (MCP-1/CCL-2) secretion. This study underscores distinctions between virgin and sieved Fe-based powders and suggests relatively low acute toxicity.
|
|
| 5. |
- Alijagic, Andi, 1992-, et al.
(författare)
-
Immunotoxic, genotoxic, and endocrine disrupting impacts of polyamide microplastic particles and chemicals
- 2024
-
Ingår i: Environment International. - : Elsevier. - 0160-4120 .- 1873-6750. ; 183
-
Tidskriftsartikel (refereegranskat)abstract
- Due to their exceptional properties and cost effectiveness, polyamides or nylons have emerged as widely used materials, revolutionizing diverse industries, including industrial 3D printing or additive manufacturing (AM). Powder-based AM technologies employ tonnes of polyamide microplastics to produce complex components every year. However, the lack of comprehensive toxicity assessment of particulate polyamides and polyamide-associated chemicals, especially in the light of the global microplastics crisis, calls for urgent action. This study investigated the physicochemical properties of polyamide-12 microplastics used in AM, and assessed a number of toxicity endpoints focusing on inflammation, immunometabolism, genotoxicity, aryl hydrocarbon receptor (AhR) activation, endocrine disruption, and cell morphology. Specifically, microplastics examination by means of field emission scanning electron microscopy revealed that work flow reuse of material created a fraction of smaller particles with an average size of 1-5 µm, a size range readily available for uptake by human cells. Moreover, chemical analysis by means of gas chromatography high-resolution mass spectrometry detected several polyamide-associated chemicals including starting material, plasticizer, thermal stabilizer/antioxidant, and migrating slip additive. Even if polyamide particles and chemicals did not induce an acute inflammatory response, repeated and prolonged exposure of human primary macrophages disclosed a steady increase in the levels of proinflammatory chemokine Interleukin-8 (IL-8/CXCL-8). Moreover, targeted metabolomics disclosed that polyamide particles modulated the kynurenine pathway and some of its key metabolites. The p53-responsive luciferase reporter gene assay showed that particles per se were able to activate p53, being indicative of a genotoxic stress. Polyamide-associated chemicals triggered moderate activation of AhR and elicited anti-androgenic activity. Finally, a high-throughput and non-targeted morphological profiling by Cell Painting assay outlined major sites of bioactivity of polyamide-associated chemicals and indicated putative mechanisms of toxicity in the cells. These findings reveal that the increasing use of polyamide microplastics may pose a potential health risk for the exposed individuals, and it merits more attention.
|
|
| 6. |
- Alijagic, Andi, 1992-, et al.
(författare)
-
NLRP3 inflammasome as a sensor of micro- and nanoplastics immunotoxicity
- 2023
-
Ingår i: Frontiers in Immunology. - : Frontiers Media S.A.. - 1664-3224. ; 14
-
Forskningsöversikt (refereegranskat)abstract
- Micro- and nanoplastics (MNPs) are emerging pollutants with scarcely investigated effects on human innate immunity. If they follow a similar course of action as other, more thoroughly investigated particulates, MNPs may penetrate epithelial barriers, potentially triggering a cascade of signaling events leading to cell damage and inflammation. Inflammasomes are intracellular multiprotein complexes and stimulus-induced sensors critical for mounting inflammatory responses upon recognition of pathogen- or damage-associated molecular patterns. Among these, the NLRP3 inflammasome is the most studied in terms of activation via particulates. However, studies delineating the ability of MNPs to affect NLRP3 inflammasome activation are still rare. In this review, we address the issue of MNPs source and fate, highlight the main concepts of inflammasome activation via particulates, and explore recent advances in using inflammasome activation for assessment of MNP immunotoxicity. We also discuss the impact of co-exposure and MNP complex chemistry in potential inflammasome activation. Development of robust biological sensors is crucial in order to maximize global efforts to effectively address and mitigate risks that MNPs pose for human health.
|
|
| 7. |
- Alijagic, Andi, 1992-, et al.
(författare)
-
Particle Safety Assessment in Additive Manufacturing : From Exposure Risks to Advanced Toxicology Testing.
- 2022
-
Ingår i: Frontiers in Toxicology. - : Frontiers Media S.A.. - 2673-3080. ; 4
-
Forskningsöversikt (refereegranskat)abstract
- Additive manufacturing (AM) or industrial three-dimensional (3D) printing drives a new spectrum of design and production possibilities; pushing the boundaries both in the application by production of sophisticated products as well as the development of next-generation materials. AM technologies apply a diversity of feedstocks, including plastic, metallic, and ceramic particle powders with distinct size, shape, and surface chemistry. In addition, powders are often reused, which may change the particles' physicochemical properties and by that alter their toxic potential. The AM production technology commonly relies on a laser or electron beam to selectively melt or sinter particle powders. Large energy input on feedstock powders generates several byproducts, including varying amounts of virgin microparticles, nanoparticles, spatter, and volatile chemicals that are emitted in the working environment; throughout the production and processing phases. The micro and nanoscale size may enable particles to interact with and to cross biological barriers, which could, in turn, give rise to unexpected adverse outcomes, including inflammation, oxidative stress, activation of signaling pathways, genotoxicity, and carcinogenicity. Another important aspect of AM-associated risks is emission/leakage of mono- and oligomers due to polymer breakdown and high temperature transformation of chemicals from polymeric particles, both during production, use, and in vivo, including in target cells. These chemicals are potential inducers of direct toxicity, genotoxicity, and endocrine disruption. Nevertheless, understanding whether AM particle powders and their byproducts may exert adverse effects in humans is largely lacking and urges comprehensive safety assessment across the entire AM lifecycle-spanning from virgin and reused to airborne particles. Therefore, this review will detail: 1) brief overview of the AM feedstock powders, impact of reuse on particle physicochemical properties, main exposure pathways and protective measures in AM industry, 2) role of particle biological identity and key toxicological endpoints in the particle safety assessment, and 3) next-generation toxicology approaches in nanosafety for safety assessment in AM. Altogether, the proposed testing approach will enable a deeper understanding of existing and emerging particle and chemical safety challenges and provide a strategy for the development of cutting-edge methodologies for hazard identification and risk assessment in the AM industry.
|
|
| 8. |
- Alijagic, Andi, 1992-, et al.
(författare)
-
The triple exposure nexus of microplastic particles, plastic-associated chemicals, and environmental pollutants from a human health perspective
- 2024
-
Ingår i: Environment International. - : Elsevier. - 0160-4120 .- 1873-6750. ; 188
-
Forskningsöversikt (refereegranskat)abstract
- The presence of microplastics (MPs) is increasing at a dramatic rate globally, posing risks for exposure and subsequent potential adverse effects on human health. Apart from being physical objects, MP particles contain thousands of plastic-associated chemicals (i.e., monomers, chemical additives, and non-intentionally added substances) captured within the polymer matrix. These chemicals are often migrating from MPs and can be found in various environmental matrices and human food chains; increasing the risks for exposure and health effects. In addition to the physical and chemical attributes of MPs, plastic surfaces effectively bind exogenous chemicals, including environmental pollutants (e.g., heavy metals, persistent organic pollutants). Therefore, MPs can act as vectors of environmental pollution across air, drinking water, and food, further amplifying health risks posed by MP exposure. Critically, fragmentation of plastics in the environment increases the risk for interactions with cells, increases the presence of available surfaces to leach plastic-associated chemicals, and adsorb and transfer environmental pollutants. Hence, this review proposes the so-called triple exposure nexus approach to comprehensively map existing knowledge on interconnected health effects of MP particles, plastic-associated chemicals, and environmental pollutants. Based on the available data, there is a large knowledge gap in regard to the interactions and cumulative health effects of the triple exposure nexus. Each component of the triple nexus is known to induce genotoxicity, inflammation, and endocrine disruption, but knowledge about long-term and inter-individual health effects is lacking. Furthermore, MPs are not readily excreted from organisms after ingestion and they have been found accumulated in human blood, cardiac tissue, placenta, etc. Even though the number of studies on MPs-associated health impacts is increasing rapidly, this review underscores that there is a pressing necessity to achieve an integrated assessment of MPs’ effects on human health in order to address existing and future knowledge gaps.
|
|
| 9. |
- Andersson, Lena, 1965-, et al.
(författare)
-
Inflammatory and coagulatory markers and exposure to different size fractions of particle mass, number and surface area air concentrations in the Swedish hard metal industry, in particular to cobalt
- 2021
-
Ingår i: Biomarkers. - : Taylor & Francis. - 1354-750X .- 1366-5804. ; 26:6, s. 557-569
-
Tidskriftsartikel (refereegranskat)abstract
- Purpose: To study the relationship between inhalation of airborne particles and cobalt in the Swedish hard metal industry and markers of inflammation and coagulation in blood.Methods: Personal sampling of inhalable cobalt and dust were performed for subjects in two Swedish hard metal plants. Stationary measurements were used to study concentrations of inhalable, respirable, and total dust and cobalt, PM10 and PM2.5, the particle surface area and the particle number concentrations. The inflammatory markers CC16, TNF, IL-6, IL-8, IL-10, SAA and CRP, and the coagulatory markers FVIII, vWF, fibrinogen, PAI-1 and D-dimer were measured. A complete sampling was performed on the second or third day of a working week following a work-free weekend, and additional sampling was taken on the fourth or fifth day. The mixed model analysis was used, including covariates.Results: The average air concentration of inhalable dust and cobalt were 0.11 mg/m3 and 0.003 mg/m3, respectively. For some mass-based exposure measures of cobalt and total dust, statistically significant increased levels of FVIII, vWF and CC16 were found.Conclusions: The observed relationships between particle exposure and coagulatory biomarkers may indicate an increased risk of cardiovascular disease.
|
|
| 10. |
- Andersson, Lena, 1965-, et al.
(författare)
-
Respiratory health and inflammatory markers : Exposure to respirable dust and quartz and chemical binders in Swedish iron foundries
- 2019
-
Ingår i: PLOS ONE. - : PLOS. - 1932-6203. ; 14:11
-
Tidskriftsartikel (refereegranskat)abstract
- PURPOSE: To study the relationship between respirable dust, quartz and chemical binders in Swedish iron foundries and respiratory symptoms, lung function (as forced expiratory volume FEV1 and vital capacity FVC), fraction of exhaled nitric oxide (FENO) and levels of club cell secretory protein 16 (CC16) and CRP.METHODS: Personal sampling of respirable dust and quartz was performed for 85 subjects in three Swedish iron foundries. Full shift sampling and examination were performed on the second or third day of a working week after a work free weekend, with additional sampling on the fourth or fifth day. Logistic, linear and mixed model analyses were performed including, gender, age, smoking, infections, sampling day, body mass index (BMI) and chemical binders as covariates.RESULTS: The adjusted average respirable quartz and dust concentrations were 0.038 and 0.66 mg/m3, respectively. Statistically significant increases in levels of CC16 were associated with exposure to chemical binders (p = 0.05; p = 0.01) in the regression analysis of quartz and respirable dust, respectively. Non-significant exposure-responses were identified for cumulative quartz and the symptoms asthma and breathlessness. For cumulative chemical years, non-significant exposure-response were observed for all but two symptoms. FENO also exhibited a non significant exposure-response for both quartz and respirable dust. No exposure-response was determined for FEV1 or FVC, CRP and respirable dust and quartz.CONCLUSIONS: Our findings suggest that early markers of pulmonary effect, such as increased levels of CC16 and FENO, are more strongly associated with chemical binder exposure than respirable quartz and dust in foundry environments.
|
|
