| 1. |
- Bentham, James, et al.
(författare)
-
A century of trends in adult human height
- 2016
-
Ingår i: eLIFE. - 2050-084X. ; 5
-
Tidskriftsartikel (refereegranskat)abstract
- Being taller is associated with enhanced longevity, and higher education and earnings. We reanalysed 1472 population-based studies, with measurement of height on more than 18.6 million participants to estimate mean height for people born between 1896 and 1996 in 200 countries. The largest gain in adult height over the past century has occurred in South Korean women and Iranian men, who became 20.2 cm (95% credible interval 17.522.7) and 16.5 cm (13.319.7) taller, respectively. In contrast, there was little change in adult height in some sub-Saharan African countries and in South Asia over the century of analysis. The tallest people over these 100 years are men born in the Netherlands in the last quarter of 20th century, whose average heights surpassed 182.5 cm, and the shortest were women born in Guatemala in 1896 (140.3 cm; 135.8144.8). The height differential between the tallest and shortest populations was 19-20 cm a century ago, and has remained the same for women and increased for men a century later despite substantial changes in the ranking of countries.
|
|
| 2. |
- Bentham, James, et al.
(författare)
-
A century of trends in adult human height
- 2016
-
Ingår i: eLIFE. - : eLife Sciences Publications Ltd. - 2050-084X. ; 5
-
Tidskriftsartikel (refereegranskat)abstract
- Being taller is associated with enhanced longevity, and higher education and earnings. We reanalysed 1472 population-based studies, with measurement of height on more than 18.6 million participants to estimate mean height for people born between 1896 and 1996 in 200 countries. The largest gain in adult height over the past century has occurred in South Korean women and Iranian men, who became 20.2 cm (95% credible interval 17.5–22.7) and 16.5 cm (13.3– 19.7) taller, respectively. In contrast, there was little change in adult height in some sub-Saharan African countries and in South Asia over the century of analysis. The tallest people over these 100 years are men born in the Netherlands in the last quarter of 20th century, whose average heights surpassed 182.5 cm, and the shortest were women born in Guatemala in 1896 (140.3 cm; 135.8– 144.8). The height differential between the tallest and shortest populations was 19-20 cm a century ago, and has remained the same for women and increased for men a century later despite substantial changes in the ranking of countries.
|
|
| 3. |
|
|
| 4. |
- Chen, H.Y., et al.
(författare)
-
Dyslipidemia, inflammation, calcification, and adiposity in aortic stenosis: a genome-wide study
- 2023
-
Ingår i: European Heart Journal. - : Oxford University Press. - 0195-668X .- 1522-9645. ; 44:21, s. 1927-1939
-
Tidskriftsartikel (refereegranskat)abstract
- Aims Although highly heritable, the genetic etiology of calcific aortic stenosis (AS) remains incompletely understood. The aim of this study was to discover novel genetic contributors to AS and to integrate functional, expression, and cross-phenotype data to identify mechanisms of AS. Methods and results A genome-wide meta-analysis of 11.6 million variants in 10 cohorts involving 653 867 European ancestry participants (13 765 cases) was performed. Seventeen loci were associated with AS at P ≤ 5 × 10−8, of which 15 replicated in an independent cohort of 90 828 participants (7111 cases), including CELSR2–SORT1, NLRP6, and SMC2. A genetic risk score comprised of the index variants was associated with AS [odds ratio (OR) per standard deviation, 1.31; 95% confidence interval (CI), 1.26–1.35; P = 2.7 × 10−51] and aortic valve calcium (OR per standard deviation, 1.22; 95% CI, 1.08–1.37; P = 1.4 × 10−3), after adjustment for known risk factors. A phenome-wide association study indicated multiple associations with coronary artery disease, apolipoprotein B, and triglycerides. Mendelian randomization supported a causal role for apolipoprotein B-containing lipoprotein particles in AS (OR per g/L of apolipoprotein B, 3.85; 95% CI, 2.90–5.12; P = 2.1 × 10−20) and replicated previous findings of causality for lipoprotein(a) (OR per natural logarithm, 1.20; 95% CI, 1.17–1.23; P = 4.8 × 10−73) and body mass index (OR per kg/m2, 1.07; 95% CI, 1.05–1.9; P = 1.9 × 10−12). Colocalization analyses using the GTEx database identified a role for differential expression of the genes LPA, SORT1, ACTR2, NOTCH4, IL6R, and FADS. Conclusion Dyslipidemia, inflammation, calcification, and adiposity play important roles in the etiology of AS, implicating novel treatments and prevention strategies. © The Author(s) 2023. Published by Oxford University Press on behalf of the European Society of Cardiology.
|
|
| 5. |
- Ingelsson, Björn, 1983-, et al.
(författare)
-
Lymphocytes eject interferogenic mitochondrial DNA webs in response to CpG and non-CpG oligodeoxynucleotides of class C
- 2018
-
Ingår i: Proceedings of the National Academy of Sciences of the United States of America. - Washington, DC, United States : National Academy of Sciences. - 0027-8424 .- 1091-6490. ; 115:3, s. E478-E487
-
Tidskriftsartikel (refereegranskat)abstract
- Circulating mitochondrial DNA (mtDNA) is receiving increasing attention as a danger-associated molecular pattern in conditions such as autoimmunity, cancer, and trauma. We report here that human lymphocytes [B cells, T cells, natural killer (NK) cells], monocytes, and neutrophils derived from healthy blood donors, as well as B cells from chronic lymphocytic leukemia patients, rapidly eject mtDNA as web filament structures upon recognition of CpG and non-CpG oligodeoxynucleotides of class C. The release was quenched by ZnCl2, independent of cell death (apoptosis, necrosis, necroptosis, autophagy), and continued in the presence of TLR9 signaling inhibitors. B-cell mtDNA webs were distinct from neutrophil extracellular traps concerning structure, reactive oxygen species (ROS) dependence, and were devoid of antibacterial proteins. mtDNA webs acted as rapid (within minutes) messengers, priming antiviral type I IFN production. In summary, our findings point at a previously unrecognized role for lymphocytes in antimicrobial defense, utilizing mtDNA webs as signals in synergy with cytokines and natural antibodies, and cast light on the interplay between mitochondria and the immune system.
|
|
| 6. |
- Adolfo, Eldridge Vigil, et al.
(författare)
-
Electoral Violence in Africa
- 2012
-
Rapport (övrigt vetenskapligt/konstnärligt)abstract
- In the time period 2012–2013, over 20 national elections and two constitutional referendums are scheduled in Africa. In several of these elections, violence is anticipated to play a prominent role. There is great urgency to support the establishment of effective and legitimate electoral institutions and electoral frameworks; institute reforms aimed at lowering the stakes of elections; encourage the devolution of powers; improve the socio-economic standing of the populace; and devise strategies to prevent and manage electoral violence.
|
|
| 7. |
- Ahlberg, Charlotte, 1974-
(författare)
-
An experimental study of fiber suspensions between counter-rotating discs
- 2009
-
Licentiatavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The behavior of fibers suspended in a flow between two counter-rotating discs has been studied experimentally. This is inspired by the refining process in the papermaking process where cellulose fibers are ground between discs in order to change performance in the papermaking process and/or qualities of the final paper product. To study the fiber behavior in a counter-rotating flow, an experimental set-up with two glass discs was built. A CCD-camera was used to capture images of the fibers in the flow. Image analysis based on the concept of steerable filters extracted the position and orientation of the fibers in the plane of the discs. Experiments were performed for gaps of 0.1-0.9 fiber lengths, and for equal absolute values of the angular velocities for the upper and lower disc. The aspect ratios of the fibers were 7, 14 and 28. Depending on the angular velocity of the discs and the gap between them, the fibers were found to organize themselves in fiber trains. A fiber train is a set of fibers positioned one after another in the tangential direction with a close to constant fiber-to-fiber distance. In the fiber trains, each individual fiber is aligned in the radial direction (i.e. normal to the main direction of the train). The experiments show that the number of fibers in a train increases as the gap between the discs decreases. Also, the distance between the fibers in a train decreases as the length of the train increases, and the results for short trains are in accordance with previous numerical results in two dimensions.Furthermore, the results of different aspect ratios imply that there are three-dimensional fiber end-effects that are important for the forming of fiber trains.
|
|
| 8. |
- Ankerfors, Mikael, et al.
(författare)
-
The use of microfibrillated cellulose in fine paper manufacturing : Results from a pilot scale papermaking trial
- 2014
-
Ingår i: Nordic Pulp & Paper Research Journal. - 0283-2631 .- 2000-0669. ; 29:3, s. 476-483
-
Tidskriftsartikel (refereegranskat)abstract
- In this work the strength enhancing capabilities of microfibrillated cellulose (MFC) in highly filled papers was studied. Both the MFC production and the paper making were done in pilot scale under realistic industrial conditions. The results clearly show that MFC (2.5 - 5.0wt-%) could improve the mechanical properties of highly filled papers (20 - 35 wt-% filler contents). All studied dry mechanical properties were improved and the improvements were most pronounced for Z-strength and fracture toughness. By combining the MFC with a C-starch dosage further improvements in mechanical properties could be achieved. The improvements in mechanical properties enabled increased filler content with retained properties. The filler increase could be achieved at the same time as the sheet formation and the dry content after pressing were improved.
|
|
| 9. |
- Ankerfors, Mikael, et al.
(författare)
-
The use of microfibrillated cellulose in fine paper manufacturing : Results from a pilot scale papermaking trial
- 2014
-
Ingår i: Nordic Pulp & Paper Research Journal. - : Walter de Gruyter GmbH. - 0283-2631 .- 2000-0669. ; 29:3, s. 476-483
-
Tidskriftsartikel (refereegranskat)abstract
- In this work the strength enhancing capabilities of microfibrillated cellulose (MFC) in highly filled papers was studied. Both the MFC production and the paper making were done in pilot scale under realistic industrial conditions. The results clearly show that MFC (2.5-5.0 wt-%) could improve the mechanical properties of highly filled papers (20-35 wt-% filler contents). All studied dry mechanical properties were improved and the improvements were most pronounced for Z-strength and fracture toughness. By combining the MFC with a C-starch dosage further improvements in mechanical properties could be achieved. The improvements in mechanical properties enabled increased filler content with retained properties. The filler increase could be achieved at the same time as the sheet formation and the dry content after pressing were improved.
|
|
| 10. |
- Ankerfors, M., et al.
(författare)
-
The use of microfibrillated cellulose in high filler fine papers
- 2013
-
Ingår i: Pap. Conf. Trade Show, PaperCon. - 9781627489669 ; , s. 1129-1132
-
Konferensbidrag (refereegranskat)abstract
- The field of communication, printing and writing papers has become an increasingly competitive field during the latest years as the market demand of printing and writing papers and newsprint has finally started to decline in the developed economies. One obvious approach to stay competitive is to increase the filler content of such papers. High filler paper is not a new idea and numerous approaches have been tested over the years to produce such papers. In order to reach industrial implementation, pilot-scale research and development under industrial conditions is necessary as a step after laboratory studies. Therefore an environment has been developed in order to perform projects targeting existing technologies for high filler applications as well as the new possibilities incurred by e.g. microfibrillated cellulose.
|
|
