1. |
- Araoz, Joseph Adhemar, 1982-, et al.
(författare)
-
Non-ideal Stirling engine thermodynamic model suitable for the integration into overall energy systems
- 2014
-
Ingår i: Applied Thermal Engineering. - : Elsevier. - 1359-4311 .- 1873-5606. ; 73:1, s. 203-219
-
Tidskriftsartikel (refereegranskat)abstract
- The reliability of modelling and simulation of energy systems strongly depends on the prediction accuracy of each system component. This is the case of Stirling engine-based systems, where an accurate modelling of the engine performance is very important to understand the overall system behaviour. In this sense, many Stirling engine analyses with different approaches have been already developed. However, there is a lack of Stirling engine models suitable for the integration into overall system simulations. In this context, this paper aims to develop a rigorous Stirling engine model that could be easily integrated into combined heat and power schemes for the overall techno-economic analysis of these systems. The model developed considers a Stirling engine with adiabatic working spaces, isothermal heat exchangers, dead volumes, and imperfect regeneration. Additionally, it considers mechanical pumping losses due to friction, limited heat transfer and thermal losses on the heat exchangers. The predicted efficiency and power output were compared with the numerical model and the experimental work reported by the NASA Lewis Research Centre for the GPU-3 Stirling engine. This showed average absolute errors around ±4% for the brake power, and ±5% for the brake efficiency at different frequencies. However, the model also showed large errors (±15%) for these calculations at higher frequencies and low pressures. Additional results include the calculation of the cyclic expansion and compression work; the pressure drop and heat flow through the heat exchangers; the conductive, shuttle effect and regenerator thermal losses; the temperature and mass flow distribution along the system; and the power output and efficiency of the engine.
|
|
2. |
- Araoz Ramos, Joseph Adhemar, 1982-, et al.
(författare)
-
Development and validation of a thermodynamic model for the performance analysis of a gamma Stirling engine prototype
- 2015
-
Ingår i: Applied Thermal Engineering. - : Elsevier BV. - 1359-4311 .- 1873-5606. ; 83, s. 16-30
-
Tidskriftsartikel (refereegranskat)abstract
- This work presents the development and validation of a numerical model that represents the performance of a gamma Stirling engine prototype. The model follows a modular approach considering ideal adiabatic working spaces; limited internal and external heat transfer through the heat exchangers; and mechanical and thermal losses during the cycle. In addition, it includes the calculation of the mechanical efficiency taking into account the crank mechanism effectiveness and the forced work during the cycle. Consequently, the model aims to predict the work that can be effectively taken from the shaft. The model was compared with experimental data obtained in an experimental rig built for the engine prototype. The results showed an acceptable degree of accuracy when comparing with the experimental data, with errors ranging from +/- 1% to +/- 8% for the temperature in the heater side, less than +/- 1% error for the cooler temperatures, and +/- 1 to +/- 8% for the brake power calculations. Therefore, the model was probed adequate for study of the prototype performance. In addition, the results of the simulation reflected the limited performance obtained during the prototype experiments, and a first analysis of the results attributed this to the forced work during the cycle. The implemented model is the basis for a subsequent parametric analysis that will complement the results presented.
|
|
3. |
- Araoz Ramos, Joseph Adhemar, 1982-, et al.
(författare)
-
Integration of Stirling engines into residential boilers for combined heat and power services: Thermodynamic modelling and analysis
-
Annan publikation (övrigt vetenskapligt/konstnärligt)abstract
- The use of simulation techniques for the study of Combined Heat and Power systems based on Stirling Engines (CHP-SE) has been focused on dynamic simulations that guide the sizing of the system components. These are valuable tools for the performance evaluation of determined designs. However, there is a need to complement these studies with additional analysis that could permit to assess the design improvement and the integration of the system components. For this reason, the present work developed a model that coupled the design equations of each component with the equations that describe the thermal interactions presented in the overall system.This integration allowed to obtain a deeper insight into the thermodynamic characteristics of the overall system, and thus was used for the study of a micro CHP-SE experimental rig. The results for this case study allowed to quantify the main energy outputs, the energy losses, and the influence of different parameters on the system. The overall efficiency under the original conditions presented values ranging from 60%-64% with very low exergy efficiencies ranging from 5%-7%. The simulation analysis permitted to identify design and operational parameters that would increase the overall efficiency to values closer to 80% and the exergy to values closer to 14%. These increments would correspond to the reduction of the energy losses, improvements on the conditions for the biomass combustion, and the use of engines with higher electrical outputs.
|
|
4. |
- Araoz Ramos, Joseph A., et al.
(författare)
-
Numerical simulation for the design analysis of kinematic Stirling engines
- 2015
-
Ingår i: Applied Energy. - : Elsevier BV. - 0306-2619 .- 1872-9118. ; 159, s. 633-650
-
Tidskriftsartikel (refereegranskat)abstract
- The Stirling engine is a closed-cycle regenerative system that presents good theoretical properties. These include a high thermodynamic efficiency, low emissions levels thanks to a controlled external heat source, and multi-fuel capability among others. However, the performance of actual prototypes largely differs from the mentioned theoretical potential. Actual engine prototypes present low electrical power outputs and high energy losses. These are mainly attributed to the complex interaction between the different components of the engine, and the challenging heat transfer and fluid dynamics requirements. Furthermore, the integration of the engine into decentralized energy systems such as the Combined Heat and Power systems (CHP) entails additional complications. These has increased the need for engineering tools that could assess design improvements, considering a broader range of parameters that would influence the engine performance when integrated within overall systems. Following this trend, the current work aimed to implement an analysis that could integrate the thermodynamics, and the thermal and mechanical interactions that influence the performance of kinematic Stirling engines. In particular for their use in Combined Heat and Power systems. The mentioned analysis was applied for the study of an engine prototype that presented very low experimental performance. The numerical methodology was selected for the identification of possible causes that limited the performance. This analysis is based on a second order Stirling engine model that was previously developed and validated. The simulation allowed to evaluate the effect that different design and operational parameters have on the engine performance, and consequently different performance curves were obtained. These curves allowed to identify ranges for the charged pressure, temperature ratio, heat exchangers dimensions, crank phase angle and crank mechanical effectiveness, where the engine performance was improved. In addition, the curves also permitted to recognise ranges were the design parameters could drastically reduce the brake power and efficiency. The results also showed that the design of the engine is affected by the conditions imposed by the CHP interactions, and that the engine could reach a brake power closer to 832 W with a corresponding brake efficiency of 26% when the adequate design parameters were considered. On the other hand, the performance could also be very low; as the reported in experimental tests, with brake power measurements ranging 52-120W.
|
|
5. |
- Araoz Ramos, Joseph Adhemar, 1982-, et al.
(författare)
-
Numerical simulation for the performance analysis of a gamma Stirling engine prototype
-
Annan publikation (övrigt vetenskapligt/konstnärligt)abstract
- Computer assisted modelling and simulation of energy systems asses the performance and suggest improvements to achieve energy efficient solutions. This is the case of the Stirling engine technology, where computer simulations combined with experimental work have helped to the development of different prototypes. Following this trend, the current work aims to study possible improvements towards the design of a gamma Stirling engine prototype through numerical simulations. The prototype was first experimentally studied and presented low performances. For this reason and considering a lack of reports for this prototype, the numerical simulation was the approach to identify the possible problems that limited the performance. In this regard, this paper presents the development and validation of a numerical model that represent the performance of the Stirling prototype. The model follows a modular approach considering ideal adiabatic working spaces; limited internal and external heat transfer through the heat exchangers; and mechanical and thermal losses during the cycle. In addition, it includes the calculation of the mechanical efficiency taking into account the crank mechanism effectiveness and the forced work during the cycle. Consequently, the model aims to predict the work that can be effectively taken from the shaft. The model was compared with experimental data obtained in an experimental rig built for the engine prototype. The results showed an acceptable degree of accuracy when comparing with the experimental data, with errors ranging from 1%-8% for the temperature in the heater side, less than 1% error for the cooler temperatures, and 1-8% for the brake power calculations. Therefore, the model was probed adequate for study the prototype performance. In addition, the results of the simulation reflected the limited performance obtained during the prototype experiments, and a first analysis of the results attributed this to the forced work during the cycle. The implemented model is the basis for a subsequent parametric analysis that will complement the results presented.
|
|
6. |
- Erlich, Catharina, et al.
(författare)
-
An Extensive Technical, Economical and Environmental Assessment of Energy Recovery from Palm-Oil Residues : SWE-2005-386
- 2009
-
Rapport (övrigt vetenskapligt/konstnärligt)abstract
- The Dept. of Energy Technology at KTH, together with Universidad Autónoma de Bucaramanga, Colombia, studied the different possibilities for increasing the usage of palm oil residues for energy production in an optimized way. The main purpose was to maximize the use of the solid residues coming from palm oil extraction, substitute fossil fuels in cooking, reduce emissions and environmental impacts and improve the social/economic conditions of the region. The emphasis was in introducing the discarded solid residues – EFB - as a fuel and the effective use of fibres and shells. The study was based on several innovative and unique approaches that include the pelletization of EFB for gasification purposes, densification of fibres and shells for their use in different energy applications, anaerobic digestion of EFB for biogas production and a complete optimization of the energy system considering efficiency, technology availability, environmental issues and economic factors.
|
|
7. |
|
|
8. |
- Fridh, Jens, et al.
(författare)
-
Småskalig kraftvärme i framtiden
- 2002
-
Ingår i: Svenska Mekanisters Riksförening 2002:2, sid 14-17.
-
Tidskriftsartikel (refereegranskat)
|
|
9. |
|
|
10. |
|
|