| 1. |
- Rasmussen, Robert Otto, et al.
(författare)
-
The Little Book of Quieter Pavements
- 2007
-
Rapport (övrigt vetenskapligt/konstnärligt)abstract
- The idea of designing and building quieter pavements is not new, but in recent years there has been a groundswell of interest in making this a higher priority. Various State Highway Agencies and the Federal Highway Administration have responded accordingly with both research and implementation activities that both educate on the state-of-the-practice, and advance the state-of-the-art. The Little Book of Quieter Pavements was developed with this purpose in mind to help educate the transportation industry, and in some cases the general public, about the numerous principles behind quieter pavements, and how they connect together.
|
|
| 2. |
- Adrian-Martinez, S., et al.
(författare)
-
A first search for coincident gravitational waves and high energy neutrinos using LIGO, Virgo and ANTARES data from 2007
- 2013
-
Ingår i: Journal of Cosmology and Astroparticle Physics. - : IOP Publishing. - 1475-7516. ; :6
-
Tidskriftsartikel (refereegranskat)abstract
- We present the results of the first search for gravitational wave bursts associated with high energy neutrinos. Together, these messengers could reveal new, hidden sources that are not observed by conventional photon astronomy, particularly at high energy. Our search uses neutrinos detected by the underwater neutrino telescope ANTARES in its 5 line configuration during the period January - September 2007, which coincided with the fifth and first science runs of LIGO and Virgo, respectively. The LIGO-Virgo data were analysed for candidate gravitational-wave signals coincident in time and direction with the neutrino events. No significant coincident events were observed. We place limits on the density of joint high energy neutrino - gravitational wave emission events in the local universe, and compare them with densities of merger and core-collapse events.
|
|
| 3. |
|
|
| 4. |
- Andersson Ersman, Peter, et al.
(författare)
-
Screen printed digital circuits based on vertical organicelectrochemical transistors
- 2017
-
Ingår i: Flexible and Printed Electronics. - : IOP Publishing. - 2058-8585. ; 2
-
Tidskriftsartikel (refereegranskat)abstract
- Vertical organic electrochemical transistors (OECTs) have been manufactured solely using screenprinting. The OECTs are based on PEDOT:PSS (poly(3,4-ethylenedioxythiophene) doped with poly(styrene sulfonic acid)), which defines the active material for both the transistor channel and the gateelectrode. The resulting vertical OECT devices and circuits exhibit low-voltage operation, relativelyfast switching, small footprint and high manufacturing yield; the last three parameters are explainedby the reliance of the transistor configuration on a robust structure in which the electrolyte verticallybridges the bottom channel and the top gate electrode. Two different architectures of the verticalOECT have been manufactured, characterized and evaluated in parallel throughout this report. Inaddition to the experimental work, SPICE models enabling simulations of standalone OECTs andOECT-based circuits have been developed. Our findings may pave the way for fully integrated, lowvoltageoperating and printed signal processing systems integrated with e.g. printed batteries, solarcells, sensors and communication interfaces. Such technology can then serve a low-cost basetechnology for the internet of things, smart packaging and home diagnostics applications.
|
|
| 5. |
- Báder, Mátyás, et al.
(författare)
-
Wood densification processing for newly engineered materials
- 2018
-
Ingår i: Proceedings of the 5th International Conference on Processing Technologies for the Forest and Bio-based Products Industries (PTF BPI 2018), Freising/Münich, September 20-21. - Kuchl. ; , s. 255-263
-
Konferensbidrag (refereegranskat)abstract
- Wood is a renewable, bio-based material with a mixture of different properties and qualities, used in numerous applications. Beside many species with high wood qualities several species suffer due to a number of disadvantages, where low hardness and abrasive resistance are characteristic for low-density species. This paper presents examples of on-going European research projects and industrial processes mostly related to wood densification methods. Wood densification is a classical thermohydro-mechanical (THM) wood treatment process, through which density is increased by mechanical compression of wood perpendicular to the grain, by impregnation of cell lumens or cell walls with solutions or melted substances (resins, waxes), or by a combination of both. The purpose is to produce newly designed and engineered materials and products with new property profiles, which would potentially find new markets. In general, the THM processes consist of three stages: plasticization of the wood cells, followed by the actualcompression, and finally solidification of the compressed wood in order to prevent elastic spring-back and the moisture-induced set-recovery. The wood densification process refers but is not limited to solid wood and might apply to whole wood pieces, or to local areas within given pieces only. Another THM method is the mechanical compression of wood parallel to the grain, which leads to a product with high flexibility. A European wood research network, represented by the authors of this contribution, has extended experience in many wood modification processes, as demonstrated through ongoing researches and case studies in this paper
|
|
| 6. |
- Barman, Malin, 1983, et al.
(författare)
-
Short-chain fatty acids (SCFA) in infants’ plasma and corresponding mother's milk and plasma in relation to subsequent sensitisation and atopic disease
- 2024
-
Ingår i: EBioMedicine. - 2352-3964. ; 101
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Short-chain fatty acids (SCFAs) in intestinal contents may influence immune function, while less is known about SCFAs in blood plasma. The aims were to investigate the relation between infants’ and maternal plasma SCFAs, as well as SCFAs in mother's milk, and relate SCFA concentrations in infant plasma to subsequent sensitisation and atopic disease. Methods: Infant plasma (N = 148) and corresponding mother's milk and plasma were collected four months postpartum. Nine SCFA (formic, acetic, propionic, isobutyric, butyric, succinic, valeric, isovaleric, and caproic acid) were analysed by UPLC-MS. At 12 months of age, atopic disease was diagnosed by a pediatric allergologist, and sensitisation was measured by skin prick test. All families participated in the Swedish birth cohort NICE (Nutritional impact on Immunological maturation during Childhood in relation to the Environment). Findings: Infants with sensitisation, atopic eczema, or food allergy had significantly lower concentrations of five, three, and two SCFAs, respectively, in plasma at four months. Logistic regressions models showed significant negative associations between formic, succinic, and caproic acid and sensitisation [ORadj (95% CI) per SD: 0.41 (0.19–0.91); 0.19 (0.05–0.75); 0.25 (0.09–0.66)], and between acetic acid and atopic eczema [0.42 (0.18–0.95)], after adjusting for maternal allergy. Infants’ and maternal plasma SCFA concentrations correlated strongly, while milk SCFA concentrations were unrelated to both. Butyric and caproic acid concentrations were enriched around 100-fold, and iso-butyric and valeric acid around 3-5-fold in mother's milk, while other SCFAs were less prevalent in milk than in plasma. Interpretation: Butyric and caproic acid might be actively transported into breast milk to meet the needs of the infant, although mechanistic studies are needed to confirm this. The negative associations between certain SCFAs on sensitisation and atopic disease adds to prior evidence regarding their immunoregulatory potential. Funding: Swedish Research Council (Nr. 2013-3145 and 2019-0137 to A-S.S.), Swedish Research Council for Health, Working Life and Welfare FORTE, Nr 2018-00485 to A.W.), The Swedish Asthma and Allergy Association's Research Fund (2020-0020 to A.S.).
|
|
| 7. |
|
|
| 8. |
- Bonagas, Nadilly, et al.
(författare)
-
Pharmacological targeting of MTHFD2 suppresses acute myeloid leukemia by inducing thymidine depletion and replication stress
- 2022
-
Ingår i: NATURE CANCER. - : Springer Science and Business Media LLC. - 2662-1347. ; 3:2, s. 156-
-
Tidskriftsartikel (refereegranskat)abstract
- The folate metabolism enzyme MTHFD2 (methylenetetrahydrofolate dehydrogenase/cyclohydrolase) is consistently overexpressed in cancer but its roles are not fully characterized, and current candidate inhibitors have limited potency for clinical development. In the present study, we demonstrate a role for MTHFD2 in DNA replication and genomic stability in cancer cells, and perform a drug screen to identify potent and selective nanomolar MTHFD2 inhibitors; protein cocrystal structures demonstrated binding to the active site of MTHFD2 and target engagement. MTHFD2 inhibitors reduced replication fork speed and induced replication stress followed by S-phase arrest and apoptosis of acute myeloid leukemia cells in vitro and in vivo, with a therapeutic window spanning four orders of magnitude compared with nontumorigenic cells. Mechanistically, MTHFD2 inhibitors prevented thymidine production leading to misincorporation of uracil into DNA and replication stress. Overall, these results demonstrate a functional link between MTHFD2-dependent cancer metabolism and replication stress that can be exploited therapeutically with this new class of inhibitors. Helleday and colleagues describe a nanomolar MTHFD2 inhibitor that causes replication stress and DNA damage accumulation in cancer cells via thymidine depletion, demonstrating a potential therapeutic strategy in AML tumors in vivo.
|
|
| 9. |
- Brooke, Robert, et al.
(författare)
-
Infrared electrochromic conducting polymer devices
- 2017
-
Ingår i: Journal of Materials Chemistry C. - : The Royal Society of Chemistry. - 2050-7526 .- 2050-7534. ; 5:23, s. 5824-5830
-
Tidskriftsartikel (refereegranskat)abstract
- The conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) is well known for its electrochromic properties in the visible region. Less focus has been devoted to the infrared (IR) wavelength range, although tunable IR properties could enable a wide range of novel applications. As an example, modern day vehicles have thermal cameras to identify pedestrians and animals in total darkness, but road and speed signs cannot be easily visualized by these imaging systems. IR electrochromism could enable a new generation of dynamic road signs that are compatible with thermal imaging, while simultaneously providing contrast also in the visible region. Here, we present the first metal-free flexible IR electrochromic devices, based on PEDOT:Tosylate as both the electrochromic material and electrodes. Lateral electrochromic devices enabled a detailed investigation of the IR electrochromism of thin PEDOT:Tosylate films, revealing large changes in their thermal signature, with effective temperature changes up to 10 [degree]C between the oxidized (1.5 V) and reduced (-1.5 V) states of the polymer. Larger scale (7 [times] 7 cm) vertical electrochromic devices demonstrate practical suitability and showed effective temperature changes of approximately 7 [degree]C, with good optical memory and fast switching (1.9 s from the oxidized state to the reduced state and 3.3 s for the reversed switching). The results are highly encouraging for using PEDOT:Tosylate for IR electrochromic applications.
|
|
| 10. |
- Brooke, Robert, 1989-, et al.
(författare)
-
Infrared electrochromic conducting polymer devices
- 2017
-
Ingår i: Journal of Materials Chemistry C. - : Royal Society of Chemistry (RSC). - 2050-7526 .- 2050-7534. ; 5:23, s. 5824-5830
-
Tidskriftsartikel (refereegranskat)abstract
- The conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) is well known for its electrochromic properties in the visible region. Less focus has been devoted to the infrared (IR) wavelength range, although tunable IR properties could enable a wide range of novel applications. As an example, modern day vehicles have thermal cameras to identify pedestrians and animals in total darkness, but road and speed signs cannot be easily visualized by these imaging systems. IR electrochromism could enable a new generation of dynamic road signs that are compatible with thermal imaging, while simultaneously providing contrast also in the visible region. Here, we present the first metal-free flexible IR electrochromic devices, based on PEDOT:Tosylate as both the electrochromic material and electrodes. Lateral electrochromic devices enabled a detailed investigation of the IR electrochromism of thin PEDOT:Tosylate films, revealing large changes in their thermal signature, with effective temperature changes up to 10 °C between the oxidized (1.5 V) and reduced (-1.5 V) states of the polymer. Larger scale (7 × 7 cm) vertical electrochromic devices demonstrate practical suitability and showed effective temperature changes of approximately 7 °C, with good optical memory and fast switching (1.9 s from the oxidized state to the reduced state and 3.3 s for the reversed switching). The results are highly encouraging for using PEDOT:Tosylate for IR electrochromic applications.
|
|
