| 1. |
- Moriana-Torró, Rosana, et al.
(författare)
-
Thermal characterisation of photo-oxidized HDPE/Mater-Bi and LDPE/Mater-Bi blends buried in soil
- 2008
-
Ingår i: Journal of Applied Polymer Science. - : Wiley. - 0021-8995 .- 1097-4628. ; 109:2, s. 1177-1188
-
Tidskriftsartikel (refereegranskat)abstract
- Blends of high and low density polyethylene with a commercial biodegradable material (Mater-Bi) were subjected to an accelerated soil burial test. A set of samples was previously photo-oxidized to evaluate the effects of UV-irradiation on the degradation in soil process of these blends. Thermogravimetric as well as calorimetric analysis were performed to study the biodegradation, photo-degradation and their synergetic effects. Differential scanning calorimetry was carried out to analyze the morphological changes as a consequence of the photo-oxidation process. UV-irradiation slightly modifies the crystalline content of HDPE/Mater-Bi blends, increasing the heterogeneity of this blend. Criado master curves were plotted to analyses the degradation kinetic model. Broido and Coats-Redfern methods have been used for calculating the Ea of the thermal decomposition mechanisms. Thermogravimetric results reveal that noncomplexed starch is more affected by biodegradation than the polyethylene matrix and the starch/EVPH complexes chains from Mater-Bi. However, the effects of both photo-oxidation and biodegradation processes on the thermal decomposition of Mater-Bi is influenced by the polymeric matrix used. Previous photo-oxidation finds to slow down the degradative effects caused by the soil burial test on the HDPE/Mater-Bi blends. © 2008 Wiley Periodicals, Inc.
|
|
| 2. |
- Badía, J. D., et al.
(författare)
-
A thermogravimetric approach to study the influence of a biodegradation in soil test to a Poly(lactic acid)
- 2008
-
Ingår i: Macromolecular Symposia. - : Wiley. - 1022-1360 .- 1521-3900. ; 272:1, s. 93-99
-
Tidskriftsartikel (refereegranskat)abstract
- An amorphous grade Poly (lactic acid) (PLA) was selected for an accelerated burial in soil test during 450 days. Thermogravimetric analyses were carried out to study the effects of degradation in soil on the thermal stability and the thermal decomposition kinetics. A single stage decomposition process is observed for all degradation times. It is shown that the thermal stability of PLA is slightly affected by degradation in soil. Concerning the study of the thermal decomposition kinetics, Criado master curves were plotted from experimental data to focus the study of the thermodegradation kinetic model.The kinetic methods proposed by Broido and Chang were used to calculate the apparent activation energies (Ea) of the degradation mechanism. These results were compared to the Ea values obtained by the method developed by Coats and Redfern in order to prove the applicability of the former methods to the kinetic study. As expected, non-linear tendency is found out for Ea variation along the degradation times, which can be explained as an evolution by stages. Copyright © 2008 WILEY-VCH Verlag GmbH & Co. KGaA.
|
|
| 3. |
- Badia, J. D., et al.
(författare)
-
Water absorption and hydrothermal performance of PHBV/sisal biocomposites
- 2014
-
Ingår i: Polymer degradation and stability. - : Elsevier BV. - 0141-3910 .- 1873-2321. ; 108, s. 166-174
-
Tidskriftsartikel (refereegranskat)abstract
- The performance of biocomposites of poly(hydroxybutyrate-co-valerate) (PHBV) and sisal fibre subjected to hydrothermal tests at different temperatures above the glass transition of PHBV (T-H = 26, 36 and 46 degrees C) was evaluated in this study. The influences of both the fibre content and presence of coupling agent were focused. The water absorption capability and water diffusion rate were considered for a statistical factorial analysis. Afterwards, the physico-chemical properties of water-saturated biocomposites were assessed by Fourier-Transform Infrared Analysis, Size Exclusion Chromatography, Differential Scanning Calorimetry and Scanning Electron Microscopy. It was found that the water diffusion rate increased with both temperature and percentage of fibre, whereas the amount of absorbed water was only influenced by fibre content. The use of coupling agent was only relevant at the initial stages of the hydrothermal test, giving an increase in the diffusion rate. Although the chemical structure and thermal properties of water-saturated biocomposites remained practically intact, the physical performance was considerably affected, due to the swelling of fibres, which internally blew-up the PHBV matrix, provoking cracks and fibre detachment.
|
|
| 4. |
- Santonja-Blasco, L., et al.
(författare)
-
Thermal analysis applied to the characterization of degradation in soil of polylactide : I. Calorimetric and viscoelastic analyses
- 2010
-
Ingår i: Polymer degradation and stability. - : Elsevier. - 0141-3910 .- 1873-2321. ; 95:11, s. 2185-2191
-
Tidskriftsartikel (refereegranskat)abstract
- An accelerated soil burial test has been performed on a commercial polylactide (PLA) for simulating non-controlled disposal. Degradation in soil promotes physical and chemical changes in polylactide properties, which can be characterized by Thermal Analysis techniques. Physical changes occurred in polylactide due to the degradation in soil were evaluated by correlating their calorimetric and viscoelastic properties. It is highly remarkable that each calorimetric scan offers specific and enlightening information. Degradation in soil affects the polylactide chains reorganization. A multimodal melting behavior is observed for buried PLA, degradation in soil also promotes the enlarging the lamellar thickness distribution of the population with bigger average size. Morphological changes due to degradation in soil lead to an increase in the free volume of the polylactide chains in the amorphous phase that highly affected the bulk properties. Thermal Analysis techniques provide reliable indicators of the degradation stage of polylactide induced by degradation in soil, as corroborated by molecular weight analysis. © 2010 Elsevier Ltd. All rights reserved.
|
|
