| 1. |
- Alfredo Zambrano, José, et al.
(författare)
-
Characterization of high Arabinoxylan oat lines identified from a mutagenized oat population
- 2023
-
Ingår i: Food Chemistry. - : Elsevier BV. - 0308-8146. ; 404
-
Tidskriftsartikel (refereegranskat)abstract
- Oat (Avena sativa) is a nutritionally important cereal crop that is rich in health-promoting dietary fibers, favorable proteins and polar lipids. In this work, ca. 500 random lines of a mutagenized oat population of high genetic variation were screened for arabinoxylan (AX) content. This identified lines with up to 60% higher AX levels in flour from whole seed and up to 100% higher in flour from dehulled seeds, as compared to the original Belinda variety. In addition, the cellular localization of AX was determined in cross-sections of dehulled seeds from three high and one low AX line using a xylan-specific antibody. This revealed variations in the amount and localization of AX between high and low AX lines. The high AX lines will now serve as a starting point in the development of oat varieties with superior health-promoting and rheological properties.
|
|
| 2. |
- Allahgholi, Leila, et al.
(författare)
-
Composition analysis and minimal treatments to solubilize polysaccharides from the brown seaweed Laminaria digitata for microbial growth of thermophiles
- 2020
-
Ingår i: Journal of Applied Phycology. - : Springer Science and Business Media LLC. - 0921-8971 .- 1573-5176. ; 32:3, s. 1933-1947
-
Tidskriftsartikel (refereegranskat)abstract
- Brown macroalgae (Phaeophyta) hold high potential as feedstock for biorefineries due to high biomass productivity and carbohydrate content. They are, however, a challenging, unconventional feedstock for microbial refining and several processing problems need to be solved to make them a viable option. Pre-treatment is necessary to enhance accessibility and solubility of the biomass components but should be minimal and mild to assure sustainable and cost-effective processing. Here, two routes to pre-treatLaminaria digitata to release polysaccharides were investigated: hot water pre-treatment by autoclaving (121 °C, 20 min or 60 min) and a two-step extraction with mild acid (0.1 M HCl) followed by alkaline treatment. Hot water pre-treatment resulted in partial extraction of a mixture of polysaccharides consisting of alginate, fucoidan and laminarin. After mild acid pre-treatment, alginate was found in the remaining insoluble residues and was extracted in a second step via alkaline treatment using Na2CO3 (0.15 M) at 80 °C and CaCl2 (10%) for the precipitation. In addition to carbohydrates, a fraction of other components such as proteins, phenolic compounds, minerals and trace elements was detected in the extracts. Cultivation of the thermophilic bacterial strains Rhodothermus marinus DSM 16675 and Bacillus methanolicus MGA3 (ATCC 53907) in media supplemented with the respective extracts resulted in growth of both strains, indicating that they were able to utilize the available carbon source for growth. R. marinus displayed the highest cell density in the medium containing the extract from acid pre-treatment, whereas B. methanolicus growth was highest with the extract from hot water pre-treatment.
|
|
| 3. |
- Daugbjerg Christensen, Monica, et al.
(författare)
-
Cloning and Characterization of a Novel N-Acetyl-D-galactosamine-4-O-sulfate Sulfatase, SulA1, from a Marine Arthrobacter Strain
- 2024
-
Ingår i: Marine Drugs. - 1660-3397. ; 22:3
-
Tidskriftsartikel (refereegranskat)abstract
- Sulfation is gaining increased interest due to the role of sulfate in the bioactivity of many polysaccharides of marine origin. Hence, sulfatases, enzymes that control the degree of sulfation, are being more extensively researched. In this work, a novel sulfatase (SulA1) encoded by the gene sulA1 was characterized. The sulA1-gene is located upstream of a chondroitin lyase encoding gene in the genome of the marine Arthrobacter strain (MAT3885). The sulfatase was produced in Escherichia coli. Based on the primary sequence, the enzyme is classified under sulfatase family 1 and the two catalytic residues typical of the sulfatase 1 family—Cys57 (post-translationally modified to formyl glycine for function) and His190—were conserved. The enzyme showed increased activity, but not improved stability, in the presence of Ca2+, and conserved residues for Ca2+ binding were identified (Asp17, Asp18, Asp277, and Asn278) in a structural model of the enzyme. The temperature and pH activity profiles (screened using p-nitrocatechol sulfate) were narrow, with an activity optimum at 40–50 °C and a pH optimum at pH 5.5. The Tm was significantly higher (67 °C) than the activity optimum. Desulfation activity was not detected on polymeric substrates, but was found on GalNAc4S, which is a sulfated monomer in the repeated disaccharide unit (GlcA–GalNAc4S) of, e.g., chondroitin sulfate A. The position of the sulA1 gene upstream of a chondroitin lyase gene and combined with the activity on GalNAc4S suggests that there is an involvement of the enzyme in the chondroitin-degrading cascade reaction, which specifically removes sulfate from monomeric GalNAc4S from chondroitin sulfate degradation products.
|
|
| 4. |
- Huang, Fang, et al.
(författare)
-
Cultivation of the gut bacterium Prevotella copri DSM 18205T using glucose and xylose as carbon sources
- 2021
-
Ingår i: MicrobiologyOpen. - : Wiley. - 2045-8827. ; 10:3
-
Tidskriftsartikel (refereegranskat)abstract
- Prevotella copri DSM18205T is a human gut bacterium, suggested as a next-generation probiotic. To utilize it as such, it is, however, necessary to grow the species in a reproducible manner. Prevotella copri has previously been reported to be highly sensitive to oxygen, and hence difficult to isolate and cultivate. This study presents successful batch cultivation strategies for viable strain inoculations and growth in both serum bottles and a stirred tank bioreactor (STR), without the use of an anaerobic chamber, as long as the cells were kept in the exponential growth phase. A low headspace volume in the STR was important to reach high cell density. P. copri utilized xylose cultivated in Peptone Yeast Xylose medium (PYX medium), resulting in a comparable growth rate and metabolite production as in Peptone Yeast Glucose medium (PYG medium) in batch cultivations at pH 7.2.Up to 5 g/L of the carbon source was consumed, leading to the production of succinic acid, acetic acid, and formic acid, and cell densities (OD620 nm ) in the range 6-7.5. The highest yield of produced succinic acid was 0.63 ± 0.05 g/g glucose in PYG medium cultivations and 0.88 ± 0.06 g/g xylose in PYX medium cultivations.
|
|
| 5. |
- Khaleghipour, Leila, et al.
(författare)
-
Extraction of sugarcane bagasse arabinoxylan, integrated with enzymatic production of xylo-oligosaccharides and separation of cellulose
- 2021
-
Ingår i: Biotechnology for Biofuels. - : Springer Science and Business Media LLC. - 1754-6834. ; 14:1
-
Tidskriftsartikel (refereegranskat)abstract
- Sugarcane processing roughly generates 54 million tonnes sugarcane bagasse (SCB)/year, making SCB an important material for upgrading to value-added molecules. In this study, an integrated scheme was developed for separating xylan, lignin and cellulose, followed by production of xylo-oligosaccharides (XOS) from SCB. Xylan extraction conditions were screened in: (1) single extractions in NaOH (0.25, 0.5, or 1 M), 121 °C (1 bar), 30 and 60 min; (2) 3 × repeated extraction cycles in NaOH (1 or 2 M), 121 °C (1 bar), 30 and 60 min or (3) pressurized liquid extractions (PLE), 100 bar, at low alkalinity (0-0.1 M NaOH) in the time and temperature range 10-30 min and 50-150 °C. Higher concentration of alkali (2 M NaOH) increased the xylan yield and resulted in higher apparent molecular weight of the xylan polymer (212 kDa using 1 and 2 M NaOH, vs 47 kDa using 0.5 M NaOH), but decreased the substituent sugar content. Repeated extraction at 2 M NaOH, 121 °C, 60 min solubilized both xylan (85.6% of the SCB xylan), and lignin (84.1% of the lignin), and left cellulose of high purity (95.8%) in the residuals. Solubilized xylan was separated from lignin by precipitation, and a polymer with β-1,4-linked xylose backbone substituted by arabinose and glucuronic acids was confirmed by FT-IR and monosaccharide analysis. XOS yield in subsequent hydrolysis by endo-xylanases (from glycoside hydrolase family 10 or 11) was dependent on extraction conditions, and was highest using xylan extracted by 0.5 M NaOH, (42.3%, using Xyn10A from Bacillus halodurans), with xylobiose and xylotriose as main products. The present study shows successful separation of SCB xylan, lignin, and cellulose. High concentration of alkali, resulted in xylan with lower degree of substitution (especially reduced arabinosylation), while high pressure (using PLE), released more lignin than xylan. Enzymatic hydrolysis was more efficient using xylan extracted at lower alkaline strength and less efficient using xylan obtained by PLE and 2 M NaOH, which may be a consequence of polymer aggregation, via remaining lignin interactions.
|
|
| 6. |
- Linares-Pastén, Javier, et al.
(författare)
-
Efficient poly(3-hydroxypropionate) production from glycerol using Lactobacillus reuteri and recombinant Escherichia coli harboring L. reuteri propionaldehyde dehydrogenase and Chromobacterium sp. PHA synthase genes.
- 2015
-
Ingår i: Bioresource Technology. - : Elsevier BV. - 1873-2976 .- 0960-8524. ; 180, s. 172-176
-
Tidskriftsartikel (refereegranskat)abstract
- Poly(3-hydroxypropionate), P(3HP), is a polymer combining good biodegradability with favorable material properties. In the present study, a production system for P(3HP) was designed, comprising conversion of glycerol to 3-hydroxypropionaldehyde (3HPA) as equilibrium mixture with 3HPA-hydrate and -dimer in aqueous system (reuterin) using resting cells of native Lactobacillus reuteri in a first stage followed by transformation of the 3HPA to P(3HP) using recombinant Escherichia coli strain co-expressing highly active coenzyme A-acylating propionaldehyde dehydrogenase (PduP) from L. reuteri and polyhydroxyalkanoate synthase (PhaCcs) from Chromobacterium sp. P(3HP) content of up to 40% (w/w) cell dry weight was reached, and the yield with respect to the reuterin consumed by the cells was 78%. Short biotransformation period (4.5h), lack of additives or expensive cofactors, and use of a cheap medium for cultivation of the recombinant strain, provides a new efficient and potentially economical system for P(3HP) production.
|
|
| 7. |
- Majumdar, Abhinav, et al.
(författare)
-
Macromolecular characterization of high β-glucan oat lines
- 2024
-
Ingår i: Heliyon. - 2405-8440. ; 10:2
-
Tidskriftsartikel (refereegranskat)abstract
- Oat (Avena sativa) is a cereal grain rich in fibers, proteins, vitamins and minerals. Oats have been linked to several health benefits, such as lowering blood cholesterol levels, counteracting cardiovascular disease and regulating blood sugar levels. This study aimed to characterize two new oat lines with high β-glucan content emanating from ethyl methyl sulphonate mutagenesis on the Lantmännen elite variety Belinda. Two of the mutated lines, and the mother variety Belinda, were profiled for β-glucan, arabinoxylan, total dietary fiber and starch composition. In addition, total lipid and protein content, amino acid composition and β-glucan molecular weights were analyzed. The high levels of β-glucan resulted in a significant increase in total dietary fiber, but no correlation could be established between higher or lower levels of the assayed macromolecules, i.e., between arabinoxylan-, starch-, lipid- or protein levels in the mutated lines compared to the reference. The results indicate separate biosynthetic pathways for β-glucans and other macromolecules and an independent regulation of the different polysaccharides studied. Therefore, ethyl methyl sulphonate mutagenesis can be used to increase levels of multiple macromolecules in the same line.
|
|
| 8. |
- Mukti, Israt Jahan, et al.
(författare)
-
Medium development and production of carotenoids and exopolysaccharides by the extremophile Rhodothermus marinus DSM16675 in glucose-based defined media
- 2022
-
Ingår i: Microbial Cell Factories. - : Springer Science and Business Media LLC. - 1475-2859. ; 21
-
Tidskriftsartikel (refereegranskat)abstract
- Background: The marine thermophilic bacterium Rhodothermus marinus can degrade many polysaccharides which makes it interesting as a future cell factory. Progress using this bacterium has, however, been hampered by limited knowledge on media and conditions for biomass production, often resulting in low cell yields and low productivity, highlighting the need to develop conditions that allow studies of the microbe on molecular level. This study presents development of defined conditions that support growth, combined with evaluation of production of carotenoids and exopolysaccharides (EPSs) by R. marinus strain DSM 16675.Results: Two defined media were initially prepared: one including a low addition of yeast extract (modified Wolfe’s medium) and one based on specific components (defined medium base, DMB) to which two amino acids (N and Q), were added. Cultivation trials of R. marinus DSM 16675 in shake flasks, resulted in maximum cell densities (OD620 nm) of 2.36 ± 0.057, cell dry weight (CDW) 1.2 ± 0.14 mg/L, total carotenoids 0.59 × 10–3 mg/L, and EPSs 1.72 ± 0.03 mg/L using 2 g/L glucose in DMB. In Wolfe’s medium (supplemented by 0.05 g/L yeast extract and 2.5 g/L glucose), maximum OD620 nm was 2.07 ± 0.05, CDW 1.05 ± 0.07 mg/L, total carotenoids 0.39 × 10–3 mg/L, and EPSs 1.74 ± 0.2 mg/L. Growth trials at 5 g/L glucose in these media either failed or resulted in incomplete substrate utilization. To improve reproducibility and increase substrate utilization, a screening of macroelements (e.g. phosphate) in DMB, was combined with use of trace elements and vitamins of the modified Wolfe’s medium. The resulting defined minimal R. marinus medium, (DRM), allowed reproducible cultivations to a final OD620nm of 6.6 ± 0.05, CDW 2.85 ± 0.07 mg/L, a maximum specific growth rate (µmax) of 0.26 h−1, total carotenoids 0.77 × 10–3 mg/L and EPSs 3.4 ± 0.17 mg/L in cultivations supplemented with up to 5 g/L glucose.Conclusion: A minimal defined medium (DRM) was designed that resulted in reproducible growth and an almost doubled formation of both total carotenoids and EPSs. Such defined conditions, are necessary for systematic studies of metabolic pathways, to determine the specific requirements for growth and fully characterize metabolite production.
|
|
| 9. |
- Nordberg Karlsson, Eva, et al.
(författare)
-
Metabolic engineering of thermophilic bacteria for production of biotechnologically interesting compounds
- 2020
-
Ingår i: Biotechnological applications of extremophilic microorganisms. - : De Gruyter. - 9783110424331 ; , s. 73-96
-
Bokkapitel (refereegranskat)abstract
- Many thermophilic bacteria are efficient biomass degraders (producing polysaccharide degrading enzymes and utilizing a great variety of substrates, e.g. lignocellulosic polymers, pentoses, hexoses, as well sugar acids, and sugar alcohols). This makes them interesting organisms as potential cell factories in a circular bioeconomy. Lignocellulosic and marine macroalgal biomasses are regarded as sustainable biorefinery feedstocks for the production of energy carriers and platform and specialty chemicals, thereby meeting impending fossil fuel shortage and counteracting accumulation of greenhouse gasses. However, progress in using thermophilic bacteria that utilize these feedstocks as carbon sources has been hampered by the lack of suitable engineering tools to improve the production profiles of interesting target metabolites as specific synthetic production pathways need to be inserted/modified or existing pathways optimized by metabolic engineering. In this chapter, we review the progress on the use of thermophilic bacteria in metabolic engineering and the available engineering tools and give examples of species for which successful engineering has been accomplished. Today, the majority of thermophilic bacteria targeted for production of compounds of industrial interest by metabolic engineering belong to the phylum Firmicutes (e.g. Thermoanaerobacterium, Caldocellulosiruptor, Geobacillus, and Bacillus), taking advantage of anaerobic catabolic pathways producing organic acids and alcohols. However, there are additional and aerobic species gaining interest concerning biomass degradation and the ability of carbon dioxide fixation as well as production of molecules of interest, and some examples of this are also given.
|
|
| 10. |
- Norlander, Siri, et al.
(författare)
-
Effect of kilning on the macronutrient composition profile of three Swedish oat varieties
-
Ingår i: Cereal Chemistry. - 0009-0352.
-
Tidskriftsartikel (refereegranskat)abstract
- Background and ObjectivesKilning is crucial in oat processing, to prevent rancidity and extend shelf-life. This study examines kilning effects on the macronutrient composition in Swedish oat varieties Galant, Fatima, and Belinda. We compared two kilning methods: one mimicking industrial practice and a simplified version. We analyzed dietary fibers (arabinoxylan, β-glucan), protein and amino acids, lipid profile, lipase activity, and antioxidant capacity in these oat samples.FindingsDistinct compositional differences were found: Galant had low lipid content, Fatima had elevated lipid and protein levels with fewer carbohydrates, and Belinda was rich in β-glucan and dietary fibers. Both kilning procedures had similar impacts on all varieties, causing no major changes in dietary fiber or total protein content, but resulting in a 20% decrease in soluble proteins. Kilning decreased levels of several amino acids in Belinda, while the l-glutamate/glutamine ratio increased across all varieties. Lipid analysis showed minimal kilning-induced changes; yet, antioxidative capacity diminished. Both kilning methods effectively inactivated lipases.ConclusionsThese findings emphasize macronutrient variations among oat varieties and the effect of kilning on soluble proteins, amino acids, and antioxidative capacity.Significance and NoveltyThis study underscores the need for precise control in oat processing, crucial in plant-based protein and novel food development for optimal quality and yield.
|
|
