1. |
- Mensah, Rhoda Afriyie, et al.
(författare)
-
Biochar-Added Cementitious Materials—A Review on Mechanical, Thermal, and Environmental Properties
- 2021
-
Ingår i: Sustainability. - : MDPI. - 2071-1050. ; 13:16
-
Forskningsöversikt (refereegranskat)abstract
- The enhanced carbon footprint of the construction sector has created the need for CO2 emission control and mitigation. CO2 emissions in the construction sector are influenced by a variety of factors, including raw material preparation, cement production, and, most notably, the construction process. Thus, using biobased constituents in cement could reduce CO2 emissions. However, biobased constituents can degrade and have a negative impact on cement performance. Recently, carbonised biomass known as biochar has been found to be an effective partial replacement for cement. Various studies have reported improved mechanical strength and thermal properties with the inclusion of biochar in concrete. To comprehend the properties of biochar-added cementitious materials, the properties of biochar and their effect on concrete need to be examined. This review provides a critical examination of the mechanical and thermal properties of biochar and biochar-added cementitious materials. The study also covers biochar’s life cycle assessment and economic benefits. Overall, the purpose of this review article is to provide a means for researchers in the relevant field to gain a deeper understanding of the innate properties of biochar imparted into biochar-added cementitious materials for property enhancement and reduction of CO2 emissions.
|
|
2. |
- Agredo Chávez, Angélica, et al.
(författare)
-
Assessment of residual prestress in existing concrete bridges: The Kalix bridge
- 2024
-
Ingår i: Engineering structures. - : Elsevier. - 0141-0296 .- 1873-7323. ; 311
-
Tidskriftsartikel (refereegranskat)abstract
- The direct socio-economic consequences of the deterioration of aging infrastructure systems have triggered a continuous process of revising and updating current design standards and guidelines for critical network components. Specifically, long-term degradation processes demand the analysis and evaluation of vital structural assets such as prestressed concrete bridges. It is crucial to develop theoretically consistent, user-friendly, and non-destructive methodologies that engineering professionals can employ to prevent and mitigate potential catastrophic outcomes during the service life of these bridges. This study provides a thorough review of the available testing methods employed over the years for prestressed concrete bridges and introduces a comprehensive framework for evaluating existing methods for residual prestress force assessment. Through a multi-criteria selection process, the three most feasible tests were designed and carried out on an existing 66-year-old balanced cantilever box girder bridge exposed to freezing temperatures that affected the instrumentation plan and test execution. Finally, predictive models compliant with standard codes were calibrated based on the experimental results and the life cycle loss of prestress forces was evaluated to assess relevant bounding intervals. Findings reveal limited on-site testing and discrepancies between calculated residual forces and predictions by standard codes. The saw cut method showed a 18% difference from the initial applied prestress according to the prestress protocol, suggesting the use of a cover meter and concrete modulus evaluation for improved accuracy. The strand cutting method resulted in a 14% difference, emphasizing the need for stress redistribution assessment. The second-order deflection method showed a 6% difference, indicating a focus on enhanced boundary conditions and thorough sensitivity analysis for future investigations.
|
|
3. |
- Agredo Chavez, Angelica Maria, et al.
(författare)
-
Available Tests to evaluate Residual Prestressing Forces in Concrete Bridges
- 2022
-
Ingår i: IABSE Symposium Prague 2022: Challenges for Existing and Oncoming Structures - Report, International Association for Bridge and Structural Engineering. - Zurich, Switzerland : International Association for Bridge and Structural Engineering. ; , s. 1123-1131
-
Konferensbidrag (refereegranskat)abstract
- The reduction of the structural capacity and eventual collapse of existing concrete bridges is often related to the loss of the initial prestressing forces. This loss can be associated to immediate or time dependent factors such as elastic shortening, creep, relaxation, loading, and cracking, among others. In addition, environmental factors can lead to corrosion of the strands with the subsequent reduction of their area, loss of bond with the concrete and additional cracking which in turn will influence the value of the residual prestress force and the bridge capacity. Therefore, the evaluation of such losses is critical in the decision-making process of defining a financial and environmental cost optimized intervention strategies (e.g., strengthening or replacement). In this paper, a detailed literature review regarding destructive and non-destructive methods for measuring the residual force in prestressed concrete bridges is carried out and used to develop a database of existing experimental tests.
|
|
4. |
- Agredo Chavez, Angelica Maria, et al.
(författare)
-
Cracking and Fatigue of Heavy Loaded Prestressed Concrete Bridge in Sweden
- 2022
-
Ingår i: IABSE Symposium Prague 2022: Challenges for Existing and Oncoming Structures - Report, International Association for Bridge and Structural Engineering. - Zürich : International Association for Bridge and Structural Engineering. ; , s. 792-799
-
Konferensbidrag (refereegranskat)abstract
- A prestressed concrete bridge was built in 1963 with BBRV cables. It has three spans and a total length of 134.8 m. Due to mining activities the bridge was loaded with trucks with a total weight of 90 ton during 2012-2014 and from 2019. Crack development has been monitored manually and from 2020 with strain gauges and LVDTs.Cracks normally vary between 0.1 to 0.3 mm in width and grow in length with time. In November 2020 some of the strain gauges on the concrete showed alarming growth and the bridge was closed for traffic. Additional strain gauges were installed on vertical reinforcement bars and an assessment was carried out of the fatigue capacity of the bridge. It was found that the new strain gauges did not indicate any growth in strain and that the fatigue capacity was sufficient. The bridge could be opened again for traffic after being closed for five weeks. Monitoring drift in the strain gauges and fatigue are discussed.
|
|
5. |
- Agredo Chavez, Angelica Maria, et al.
(författare)
-
Data Validation of Strain-Based Monitoring Systems in Low Temperature Conditions, Case Study : The Kalix Bridge
- 2023
-
Ingår i: Building for the Future: Durable, Sustainable, Resilient - Proceedings of the fib Symposium 2023 - Volume 2. - : Springer. - 9783031325106 - 9783031325113 ; , s. 986-995
-
Konferensbidrag (refereegranskat)abstract
- Over the last decades, economic growth and sustained development have enforced the need to ensure reliable and long-lasting infrastructure network to guarantee serviceability and safety. Nevertheless, detrimental effects can lead over time to insufficient structural performance under increasing service loadings and extreme events. Hence, Structural Health Monitoring (SHM) arises as a solution to cope with the need of having timely and continuous data to assess the state of crucial structural assets, such as prestressed concrete bridges. On this matter, the validation of the retrieved data becomes essential for the risk-based decision making in the assessment of bridges, where selecting the most suitable monitoring system could allow to addressed main causes to the right phenomena of deterioration during the service life of the bridge. Consistently with these efforts, this paper deals with a comparative study between the data acquired by different strain-based sensors such as Fiber optic systems (FOS) and strain gauges that were installed to monitor a proof loading test developed on a 65-year-old balanced cantilever prestressed concrete bridge located in Northern Sweden. The monitored data led to establish main differences between emerging types of monitoring systems such as FOS to the well-based strain gauges when exposed to low temperature conditions. Conclusions regarding the influencing parameters between both retrieved data are drawn when evaluating the structural response under serviceability loading conditions is performed, supporting decision makers when different levels of structural assessment are required.
|
|
6. |
- Agredo Chavez, Angelica Maria, et al.
(författare)
-
Structural model updating of an existing concrete bridge based on load testing and monitoring data
- 2023
-
Ingår i: Life-Cycle of Structures and Infrastructure Systems. - : Taylor & Francis Group. - 9781003323020 ; , s. 3999-4006
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- The backbone of European infrastructure was built after the end of the second World War and has reached, or is near to, the end of its nominal design life. This issue urges the development of structural assessment procedures that can provide infrastructure managers the information to make decisions for repairing, upgrading, or replacement. In this paper, a methodology based on load testing and Structural Health Monitoring (SHM) for the assessment of a 65- year-old prestressed concrete bridge located in Northern Sweden is presented. The retrieved data is used to develop and calibrate structural models with different levels of data completeness. The SHM procedure includes the evaluation of material properties by diagnostics, definition of the layout and installation of the instrumentation, test execution, and data analysis. A preliminary structural model is developed based only on the original design parameters, and it is sequentially updated with monitoring data retrieved during a performed proof loading test of the bridge.
|
|
7. |
- Al-Gburi, Majid, et al.
(författare)
-
Quantifying the Environmental Impact of Railway Bridges Using Life Cycle Assessment: A Case Study
- 2022
-
Ingår i: IABSE Symposium Prague 2022: Challenges for Existing and Oncoming Structures - Report. - : International Association for Bridge and Structural Engineering.
-
Konferensbidrag (refereegranskat)abstract
- As emission regulations in the EU are becoming stricter, the reduction of greenhouse gas emissions from the construction industry has become a pressing need. As part of the efforts related to this issue, it has been found that Environmental Life Cycle Analysis (LCA) approaches are required to optimize the design, construction, operation, and maintenance of buildings and infrastructure assets. In this paper, The Institution of Structural Engineers guidance on how to calculate the embodied carbon in structures is used as LCA model and evaluated in a case study. The guidance divides the structure´s life cycle into five stages (A1-A3: Product, A4-A5: Construction process, B1-B7: Use, C1-C4: End of live and D: Benefits and loads beyond the system boundary) and the environmental impact is measured in terms of carbon dioxide equivalent emissions (kgCo2e) or global warming potential (GWP). The model was applied to an existing reinforced concrete trough bridge, which is a structure type commonly used in Swedish railways. Results show that that the model was effective and simple for investigating the environmental impact of the studied structure.
|
|
8. |
- Alagumalai, Vasudevan, et al.
(författare)
-
Impact response and damage tolerance of hybrid glass/kevlar-fibre epoxy structural composites
- 2021
-
Ingår i: Polymers. - : MDPI. - 2073-4360. ; 13:16
-
Tidskriftsartikel (refereegranskat)abstract
- The present study is aimed at investigating the effect of hybridisation on Kevlar/E-Glass based epoxy composite laminate structures. Composites with 4 mm thickness and 16 layers of fibre (14 layers of E-glass centred and 2 outer layers of Kevlar) were fabricated using compression moulding technique. The fibre orientation of the Kevlar layers had 3 variations (0, 45 and 60°), whereas the E-glass fibre layers were maintained at 0° orientation. Tensile, flexural, impact (Charpy and Izod), interlaminar shear strength and ballistic impact tests were conducted. The ballistic test was performed using a gas gun with spherical hard body projectiles at the projectile velocity of 170 m/s. The pre-and post-impact velocities of the projectiles were measured using a high-speed camera. The energy absorbed by the composite laminates was further reported during the ballistic test, and a computerised tomographic scan was used to analyse the impact damage. The composites with 45° fibre orientation of Kevlar fibres showed better tensile strength, flexural strength, Charpy impact strength, and energy absorption. The energy absorbed by the composites with 45° fibre orientation was 58.68 J, which was 14% and 22% higher than the 0° and 60° oriented composites. © 2021 by the authors. Licensee MDPI, Basel, Switzerland.
|
|
9. |
- Andrade, Pedro, et al.
(författare)
-
On global and local buckling response of structural angle sandwich panels
- 2022
-
Ingår i: Thin-walled structures. - : Elsevier. - 0263-8231 .- 1879-3223. ; 180
-
Tidskriftsartikel (refereegranskat)abstract
- Having in mind the topic of industrialised construction and the benefits of modular construction, sandwich panels are investigated to be utilised as load-bearing wall elements. To assess its full potential, the present paper tackles the linear elastic buckling response of axially loaded angle sandwich panels, by means of numerical and analytical calculations, as the upper bound of its load bearing capacity. The failures modes are obtained and framed for concentrically loaded angle panels with fixed and pin-ended supports. A parametric study of the angle panel comprising a series of finite element models is undertaken where responses are compared with analytical calculations based on the theory of sandwich panels. Boundaries for local and global buckling are identified and framed.
|
|
10. |
- Babu, Karthik, et al.
(författare)
-
Fire Behavior of 3D-Printed Polymeric Composites
- 2021
-
Ingår i: Journal of materials engineering and performance (Print). - : Springer. - 1059-9495 .- 1544-1024. ; 30:7, s. 4745-4755
-
Tidskriftsartikel (refereegranskat)abstract
- 3D printing or additive manufacturing (AM) is considered as a flexible manufacturing method with the potential for substantial innovations in fabricating geometrically complicated structured polymers, metals, and ceramics parts. Among them, polymeric composites show versatility for applications in various fields, such as constructions, microelectronics and biomedical. However, the poor resistance of these materials against fire must be considered due to their direct relation to human life conservation and safety. In this article, the recent advances in the fire behavior of 3D-printed polymeric composites are reviewed. The article describes the recently developed methods for improving the flame retardancy of 3D-printed polymeric composites. Consequently, the improvements in the fire behavior of 3D-printed polymeric materials through the change in formulation of the composites are discussed. The article is novel in the sense that it is one of the first studies to provide an overview regarding the flammability characteristics of 3D-printed polymeric materials, which will further incite research interests to render AM-based materials fire-resistant.
|
|