| 1. |
- Botella Mascarell, Carmen, 1979, et al.
(författare)
-
EU FP7 INFSO-ICT-247223 ARTIST4G, D1.3 Innovative scheduling and cross-layer design techniques for interference avoidance
- 2011
-
Rapport (övrigt vetenskapligt/konstnärligt)abstract
- This document provides an overview of the proposed innovations and activities in Task 1.2 of Work Package 1 (WP1) of the ARTIST4G project, related to interference avoidance. Focus is on the technical approaches applicable at layer 2, which are grouped into five different classes of innovations related to clustering & user grouping, inter-cell interference coordination, coordinated scheduling, scheduling for joint processing and gametheory based scheduling. Descriptions of the proposed innovations are given including basic ideas, potential of performance, simulation results, realization options and possible implementation restrictions.
|
|
| 2. |
- Cordes, Kai, et al.
(författare)
-
Radio-Based Positioning and Video-Based Positioning
- 2021
-
Ingår i: Cellular V2X for Connected Automated Driving. - : Wiley. ; , s. 223-249
-
Bokkapitel (övrigt vetenskapligt/konstnärligt)abstract
- This chapter provides an overview of state-of-art radio- and image-based positioning tailored to the localization of connected autonomous vehicles. It evaluates the achievable accuracy of video-based vehicle positioning. Therefore, the accuracy achieved in the 5GCAR Lane Merge Coordination use case, using a set of monocular cameras for vehicle positioning, is compared to the accuracy achieved in literature. The chapter addresses the technology and performance requirements of legacy solutions along with the details of time-based, angular-based, and video-based positioning. Some of the proposed methods closely follow the long term evolution and the new radio standards; others show more innovative solutions that can achieve a high level of accuracy. Video-based positioning requires additional infrastructure (camera installation), but the camera locations are flexible. In the 5GCAR project, a mast with 10 m height is chosen for installation. Finally, the chapter concludes with a comprehensive set of simulations highlighting the pros and cons of each solution.
|
|
| 3. |
- Coustenis, A., et al.
(författare)
-
TandEM : Titan and Enceladus mission
- 2009
-
Ingår i: Experimental astronomy. - : Springer Science and Business Media LLC. - 0922-6435 .- 1572-9508. ; 23:3, s. 893-946
-
Tidskriftsartikel (refereegranskat)abstract
- TandEM was proposed as an L-class (large) mission in response to ESA's Cosmic Vision 2015-2025 Call, and accepted for further studies, with the goal of exploring Titan and Enceladus. The mission concept is to perform in situ investigations of two worlds tied together by location and properties, whose remarkable natures have been partly revealed by the ongoing Cassini-Huygens mission. These bodies still hold mysteries requiring a complete exploration using a variety of vehicles and instruments. TandEM is an ambitious mission because its targets are two of the most exciting and challenging bodies in the Solar System. It is designed to build on but exceed the scientific and technological accomplishments of the Cassini-Huygens mission, exploring Titan and Enceladus in ways that are not currently possible (full close-up and in situ coverage over long periods of time). In the current mission architecture, TandEM proposes to deliver two medium-sized spacecraft to the Saturnian system. One spacecraft would be an orbiter with a large host of instruments which would perform several Enceladus flybys and deliver penetrators to its surface before going into a dedicated orbit around Titan alone, while the other spacecraft would carry the Titan in situ investigation components, i.e. a hot-air balloon (MontgolfiSre) and possibly several landing probes to be delivered through the atmosphere.
|
|
| 4. |
- D'Amico, Valeria, et al.
(författare)
-
Advanced interference management in ARTIST4G: Interference Avoidance
- 2010
-
Ingår i: European Wireless Technology Conference, Paris, France, September 2010. - 9782874870187 ; , s. 21-24
-
Konferensbidrag (refereegranskat)abstract
- This paper gives an overview of the objectives and current research activities on interference avoidance in the EC funded research project ARTIST4G. It is the main objective of the ARTIST4G Work Package 1 (WP1), to build forward on the 3GPP LTE Release 8 baseline, proposing a novel fair mobile broadband technological framework in which to design innovative, practical, scalable and cost-effective interference avoidance solutions. This paper provides an overview of the fundamental classes of innovations studied in ARTIST4G Work Package 1 (WP1) and presents some performance results obtained by means of numerical simulations and test-bed measurements run in the field.
|
|
| 5. |
- D’Amico, Valeria, et al.
(författare)
-
EU FP7 INFSO-ICT-247223 ARTIST4G, D1.1 Definitions and architecture requirements for supporting interference avoidance techniques
- 2010
-
Rapport (övrigt vetenskapligt/konstnärligt)abstract
- It is the main objective of the ARTIST4G Work Package 1 (WP1), to design innovative interference avoidance solutions by means of transmitter signal processing, scheduling and/or cross layer techniques. Such an approach will enable to identify optimal strategies also taking into account the practical implications on the real system. The major impacts of the WP1 innovations on the radio access network and on the mobile system interfaces, together with constraints due to practical implementations, will be analyzed in this deliverable. This deliverable will be a reference for the work in ARTIST4G Work Package 4 (WP4).A set of guiding questions used to precise the requirements for WP4 has been considered for each new cooperation/coordination functionality. Answers to these questions are provided in this deliverable by grouping the different classes of WP1 innovations into 4 categories with similar requirements on the radio access architecture. For each question, current, expected, minimum and maximum targets of the requirement will be given, helping to ensure that the range of all possible values for all the innovations are taken into account.
|
|
| 6. |
- D’Amico, Valeria, et al.
(författare)
-
EU FP7 INFSO-ICT-247223 ARTIST4G, D1.2 Innovative advanced signal processing algorithms for interference avoidance
- 2010
-
Rapport (övrigt vetenskapligt/konstnärligt)abstract
- This document provides an overview of the proposed innovations and activities in Task 1.1 of Work Package 1 (WP1) of the ARTIST4G project, related to interference avoidance. Focus is on the technical approaches applicable at the physical layer, which are grouped into four different classes of innovations related to single-cell multi-user MIMO schemes, multi-cell multi-user MIMOschemes, advanced 3D beamforming and enabling functionalities. Descriptions of the proposed innovations are given including basic ideas, potential of performance, simulation results, realization options and possible implementation restrictions.
|
|
| 7. |
- D’Amico, Valeria, et al.
(författare)
-
EU FP7 INFSO-ICT-247223 ARTIST4G, D1.4 Interference Avoidance Techniques and System Design
- 2012
-
Rapport (övrigt vetenskapligt/konstnärligt)abstract
- In this document we provide performance assessments of the most promising techniques that were studied within Work Package 1 (WP1) of the ARTIST4G project related to interference avoidance. The results are based on evolved techniques that were identified and classified in deliverable D1.1 and investigated in deliverable D1.2 and D1.3, as well as novel alternative techniques that are introduced and assessed in this document.Based on the insights from these performance results we provide a synthetic perspective over the most promising solutions for interference avoidance. We argue that these solutions can reach a satisfactory trade-off in terms of performance benefits vs complexity of implementation. Some of these techniques are also identified as complementary techniques towards an integrated interference avoidance concept.
|
|
| 8. |
- Giono, Gabriel, et al.
(författare)
-
An Analysis of the Statistics and Systematics of Limb Anomaly Detections in HST/STIS Transit Images of Europa
- 2020
-
Ingår i: Astronomical Journal. - : IOP PUBLISHING LTD. - 0004-6256 .- 1538-3881. ; 159:4
-
Tidskriftsartikel (refereegranskat)abstract
- Several recent studies derived the existence of plumes on Jupiter's moon Europa. The only technique that provided multiple detections is the far-ultraviolet imaging observations of Europa in transit of Jupiter taken by the Space Telescope Imaging Spectrograph (STIS) on the Hubble Space Telescope (HST). In this study, we reanalyze the three HST/STIS transit images in which Sparks et al. identified limb anomalies as evidence for Europa's plume activity. After reproducing the results of Sparks et al., we find that positive outliers are similarly present in the images as the negative outliers that were attributed to plume absorption. A physical explanation for the positive outliers is missing. We then investigate the systematic uncertainties and statistics in the images and identify two factors that are crucial when searching for anomalies around the limb. One factor is the alignment between the actual and assumed locations of Europa on the detector. A misalignment introduces distorted statistics, most strongly affecting the limb above the darker trailing hemisphere where the plumes were detected. The second factor is a discrepancy between the observation and the model used for comparison, adding uncertainty in the statistics. When accounting for these two factors, the limb minima (and maxima) are consistent with random statistical occurrence in a sample size given by the number of pixels in the analyzed limb region. The plume candidate features in the three analyzed images can be explained by purely statistical fluctuations and do not provide evidence for absorption by plumes.
|
|
| 9. |
|
|
| 10. |
- Li, Zexian, et al.
(författare)
-
5GCAR project D3.1 Intermediate 5G V2X Radio
- 2018
-
Rapport (övrigt vetenskapligt/konstnärligt)abstract
- The 5GCAR project aims to contribute to 5G network design, and specifically to design V2X technology components for V2X use case classes identified in the project. The requirements on reliability, latency, data rates, spectral and energy efficiency cannot be fully supported by today’s wireless networks and V2X solutions and call for novel and innovative approaches, including the design of a new radio interface.
|
|
