| 1. |
- Bruzzi, M, et al.
(författare)
-
Radiation-hard semiconductor detectors for SuperLHC
- 2005
-
Ingår i: Nuclear Instruments & Methods in Physics Research. Section A: Accelerators, Spectrometers, Detectors, and Associated Equipment. - : Elsevier BV. - 0167-5087 .- 0168-9002. ; 541:1-2, s. 189-201
-
Tidskriftsartikel (refereegranskat)abstract
- An option of increasing the luminosity of the Large Hadron Collider (LHC) at CERN to 1035 cm-2 s-1 has been envisaged to extend the physics reach of the machine. An efficient tracking down to a few centimetres from the interaction point will be required to exploit the physics potential of the upgraded LHC. As a consequence, the semiconductor detectors close to the interaction region will receive severe doses of fast hadron irradiation and the inner tracker detectors will need to survive fast hadron fluences of up to above 1016cm-2. The CERN-RD50 project "Development of Radiation Hard Semiconductor Devices for Very High Luminosity Colliders" has been established in 2002 to explore detector materials and technologies that will allow to operate devices up to, or beyond, this limit. The strategies followed by RD50 to enhance the radiation tolerance include the development of new or defect engineered detector materials (SiC, GaN, Czochralski and epitaxial silicon, oxygen enriched Float Zone silicon), the improvement of present detector designs and the understanding of the microscopic defects causing the degradation of the irradiated detectors. The latest advancements within the RD50 collaboration on radiation hard semiconductor detectors will be reviewed and discussed in this work.
|
|
| 2. |
- Curbis, F., et al.
(författare)
-
Status of the soft X-ray laser (SXL) project at the Max IV laboratory
- 2019
-
Ingår i: Proceedings of the 39th International Free-Electron Laser Conference, FEL 2019. - : JACoW Publishing. - 9783954502103 ; , s. 749-752
-
Konferensbidrag (refereegranskat)abstract
- A Soft X-ray Laser project (the SXL) aiming to produce FEL radiation in the range of 1 to 5 nm is currently in a conceptual design phase and a report on the design is expected to be delivered by March 2021. The FEL will be driven by the existing 3 GeV linac at MAX IV laboratory, which also serves as injector for the two storage rings. The science case has been pushed by a large group of mainly Swedish users and consists of experiments ranging from AMO physics to condensed matter, chemistry and imaging in life science. In this contribution, we will present the current conceptual design of the accelerator and the FEL operation modes together with a general overview of the beamline and experimental station. In particular design options for the FEL will be discussed in conjunction with the features of the electron beam from the MAX IV linac and the connection with the proposed experiments.
|
|
| 3. |
- Johannsson, Oscar Thor, et al.
(författare)
-
Founding BRCA1 Mutations in Hereditary Breast and Ovarian Cancer in Southern Sweden
- 1996
-
Ingår i: American Journal of Human Genetics. - 0002-9297. ; 58:3, s. 441-450
-
Tidskriftsartikel (refereegranskat)abstract
- Nine different germ-line mutations in the BRCA1 breast and ovarian cancer susceptibility gene were identified in 15 of 47 kindreds from southern Sweden, by use of SSCP and heteroduplex analysis of all exons and flanking intron region and by a protein-truncation test for exon 11, followed by direct sequencing. All but one of the mutations are predicted to give rise to premature translation termination and include seven frameshift insertions or deletions, a nonsense mutation, and a splice acceptor site mutation. The remaining mutation is a missense mutation (Cys61Gly) in the zinc-binding motif. Four novel Swedish founding mutations were identified: the nucleotide 2595 deletion A was found in five families, the C 1806 T nonsense mutation in three families, the 3166 insertion TGAGA in three families, and the nucleotide 1201 deletion 11 in two families. Analysis of the intragenic polymorphism D17S855 supports common origins of the mutations. Eleven of the 15 kindreds manifesting BRCA1 mutations were breast-ovarian cancer families, several of them with a predominant ovarian cancer phenotype. The set of 32 families in which no BRCA1 alterations were detected included 1 breast-ovarian cancer kindred manifesting clear linkage to the BRCA1 region and loss of the wild-type chromosome in associated tumors. Other tumor types found in BRCA1 mutation/haplotype carriers included prostatic, pancreas, skin, and lung cancer, a malignant melanoma, an oligodendroglioma, and a carcinosarcoma. In all, 12 of 16 kindreds manifesting BRCA1 mutation or linkage contained ovarian cancer, as compared with only 6 of the remaining 31 families (P < .001). The present study confirms the involvement of BRCA1 in disease predisposition for a subset of hereditary breast cancer families often characterized by ovarian cancers.
|
|
| 4. |
- Wang, Damao, et al.
(författare)
-
Production of functionalised chitins assisted by fungal lytic polysaccharide monooxygenase
- 2018
-
Ingår i: Green Chemistry. - : Royal Society of Chemistry. - 1463-9262 .- 1463-9270. ; 20:9, s. 2091-2100
-
Tidskriftsartikel (refereegranskat)abstract
- The gene CCT67099 from Fusarium fujikuroi was shown to encode a novel enzyme from the Lytic Polysaccharide Monooxygenase (LPMO) Family AA11. The gene was expressed and a truncated version of the enzyme, designated as FfAA11, was purified from the periplasmic space of Escherichia coli cells at high yield. FfAA11 exhibited oxidative activity against α- and β-chitins, as well as lobster shells. Under optimised conditions, FfAA11 introduced 35 nmol of carboxylate (COO−) moieties per milligram of α-chitin. These carboxylate groups were introduced onto the chitin surface under mild enzymatic oxidation conditions in an aqueous solution without changes to the crystallinity of the chitin fibres. FfAA11 was also combined with a simple and environmentally friendly chemical method that transforms recalcitrant chitins into desirable functionalised (nano)materials. The use of ethyl(hydroxyimino)cyanoacetate (Oxyma)-assisted click chemistry allowed the rapid modification of the surface of FfAA11-oxidized chitins, with a fluorescent probe, a peptide, and gold nanoparticles. The chemical steps performed, including the FfAA11 oxidase treatment and surface chemical modification, were achieved without the production of any toxic by-products or waste organic solvents. This approach represents a novel method for the greener production of chitin-based biomaterials.
|
|
| 5. |
|
|
| 6. |
- Watanabe, M., et al.
(författare)
-
Ex Vivo Generation of Donor Antigen-Specific Immunomodulatory Cells A Comparison Study of Anti-CD80/86 mAbs and CTLA4-lg Costimulatory Blockade
- 2018
-
Ingår i: Cell Transplantation. - : SAGE Publications. - 0963-6897 .- 1555-3892. ; 27:11, s. 1692-1704
-
Tidskriftsartikel (refereegranskat)abstract
- Adoptive transfer of alloantigen-specific immunomodulatory cells generated ex vivo with anti-CD80/CD86 mAbs (2D10.4/IT2.2) holds promise for operational tolerance after transplantation. However, good manufacturing practice is required to allow widespread clinical application. Belatacept, a clinically approved cytotoxic T-lymphocyte antigen 4-immunoglobulin that also binds CD80/CD86, could be an alternative agent for 2D10.4/IT2.2. With the goal of generating an optimal cell treatment with clinically approved reagents, we evaluated the donor-specific immunomodulatory effects of belatacept- and 2D10.4/IT2.2-generated immunomodulatory cells. Immunomodulatory cells were generated by coculturing responder human peripheral blood mononuclear cells (PBMCs) (50 x 10(6) cells) with irradiated donor PBMCs (20 x 10(6) cells) from eight human leukocyte antigen-mismatched responder-donor pairs in the presence of either 2D10.4/IT2.2 (3 mu g/10(6) cells) or belatacept (40 mu g/10(6) cells). After 14 days of coculture, the frequencies of CD4(+) T cells, CD8(+) T cells, and natural killer cells as well as interferon gamma (IFN-gamma) production in the 2D10.4/IT2.2- and belatacept-treated groups were lower than those in the control group. The percentage of CD19(+) B cells was higher in the 2D10.4/IT2.2- and belatacept-treated groups than in the control group. The frequency of CD4(+)CD25(+)CD127(low)FOXP3(+) T cells increased from 4.1 +/- 1.0% (preculture) to 7.1 +/- 2.6% and 7.3 +/- 2.6% (day 14) in the 2D10.4/IT2.2- and belatacept-treated groups, respectively (p<0.05). Concurrently, delta-2 FOXP3 mRNA expression increased significantly. Compared with cells derived from the no-antibody treated control group, cells generated from both the 2D10.4/IT2.2- and belatacept-treated groups produced lower IFN-gamma and higher interleukin-10 levels in response to donor-antigens, as detected by enzyme-linked immunospot. Most importantly, 2D10.4/IT2.2- and belatacept-generated cells effectively impeded the proliferative responses of freshly isolated responder PBMCs against donor-antigens. Our results indicate that belatacept-generated donor-specific immunomodulatory cells possess comparable phenotypes and immunomodulatory efficacies to those generated with 2D10.4/IT2.2. We suggest that belatacept could be used for ex vivo generation of clinical grade alloantigen-specific immunomodulatory cells for tolerance induction after transplantation.
|
|
| 7. |
- Östrom, Henrik, et al.
(författare)
-
Probing the transition state region in catalytic CO oxidation on Ru
- 2015
-
Ingår i: Science. - : American Association for the Advancement of Science (AAAS). - 0036-8075 .- 1095-9203. ; 347:6225, s. 978-982
-
Tidskriftsartikel (refereegranskat)abstract
- Femtosecond x-ray laser pulses are used to probe the carbon monoxide (CO) oxidation reaction on ruthenium (Ru) initiated by an optical laser pulse. On a time scale of a few hundred femtoseconds, the optical laser pulse excites motions of CO and oxygen (O) on the surface, allowing the reactants to collide, and, with a transient close to a picosecond (ps), new electronic states appear in the OK-edge x-ray absorption spectrum. Density functional theory calculations indicate that these result from changes in the adsorption site and bond formation between CO and O with a distribution of OC-O bond lengths close to the transition state (TS). After 1 ps, 10% of the CO populate the TS region, which is consistent with predictions based on a quantum oscillator model.
|
|
| 8. |
- Beye, M., et al.
(författare)
-
Selective Ultrafast Probing of Transient Hot Chemisorbed and Precursor States of CO on Ru(0001)
- 2013
-
Ingår i: Physical Review Letters. - 0031-9007 .- 1079-7114. ; 110:18
-
Tidskriftsartikel (refereegranskat)abstract
- We have studied the femtosecond dynamics following optical laser excitation of CO adsorbed on a Ru surface by monitoring changes in the occupied and unoccupied electronic structure using ultrafast soft x-ray absorption and emission. We recently reported [M. Dell'Angela et al. Science 339, 1302 (2013)] a phonon-mediated transition into a weakly adsorbed precursor state occurring on a time scale of >2 ps prior to desorption. Here we focus on processes within the first picosecond after laser excitation and show that the metal-adsorbate coordination is initially increased due to hot-electron-driven vibrational excitations. This process is faster than, but occurs in parallel with, the transition into the precursor state. With resonant x-ray emission spectroscopy, we probe each of these states selectively and determine the respective transient populations depending on optical laser fluence. Ab initio molecular dynamics simulations of CO adsorbed on Ru(0001) were performed at 1500 and 3000 K providing insight into the desorption process.
|
|
| 9. |
- Bielecki, Johan, 1982, et al.
(författare)
-
Electrospray sample injection for single-particle imaging with x-ray lasers
- 2019
-
Ingår i: Science advances. - : American Association for the Advancement of Science (AAAS). - 2375-2548. ; 5:5
-
Tidskriftsartikel (refereegranskat)abstract
- The possibility of imaging single proteins constitutes an exciting challenge for x-ray lasers. Despite encouraging results on large particles, imaging small particles has proven to be difficult for two reasons: not quite high enough pulse intensity from currently available x-ray lasers and, as we demonstrate here, contamination of the aerosolized molecules by nonvolatile contaminants in the solution. The amount of contamination on the sample depends on the initial droplet size during aerosolization. Here, we show that, with our electrospray injector, we can decrease the size of aerosol droplets and demonstrate virtually contaminant-free sample delivery of organelles, small virions, and proteins. The results presented here, together with the increased performance of next-generation x-ray lasers, constitute an important stepping stone toward the ultimate goal of protein structure determination from imaging at room temperature and high temporal resolution.
|
|
| 10. |
|
|
