| 1. |
- Kassebaum, Nicholas J., et al.
(author)
-
Global, regional, and national disability-adjusted life-years (DALYs) for 315 diseases and injuries and healthy life expectancy (HALE), 1990-2015 : a systematic analysis for the Global Burden of Disease Study 2015
- 2016
-
In: The Lancet. - 0140-6736 .- 1474-547X. ; 388:10053, s. 1603-1658
-
Journal article (peer-reviewed)abstract
- Background Healthy life expectancy (HALE) and disability-adjusted life-years (DALYs) provide summary measures of health across geographies and time that can inform assessments of epidemiological patterns and health system performance, help to prioritise investments in research and development, and monitor progress toward the Sustainable Development Goals (SDGs). We aimed to provide updated HALE and DALYs for geographies worldwide and evaluate how disease burden changes with development. Methods We used results from the Global Burden of Diseases, Injuries, and Risk Factors Study 2015 (GBD 2015) for all-cause mortality, cause-specific mortality, and non-fatal disease burden to derive HALE and DALYs by sex for 195 countries and territories from 1990 to 2015. We calculated DALYs by summing years of life lost (YLLs) and years of life lived with disability (YLDs) for each geography, age group, sex, and year. We estimated HALE using the Sullivan method, which draws from age-specific death rates and YLDs per capita. We then assessed how observed levels of DALYs and HALE differed from expected trends calculated with the Socio-demographic Index (SDI), a composite indicator constructed from measures of income per capita, average years of schooling, and total fertility rate. Findings Total global DALYs remained largely unchanged from 1990 to 2015, with decreases in communicable, neonatal, maternal, and nutritional (Group 1) disease DALYs off set by increased DALYs due to non-communicable diseases (NCDs). Much of this epidemiological transition was caused by changes in population growth and ageing, but it was accelerated by widespread improvements in SDI that also correlated strongly with the increasing importance of NCDs. Both total DALYs and age-standardised DALY rates due to most Group 1 causes significantly decreased by 2015, and although total burden climbed for the majority of NCDs, age-standardised DALY rates due to NCDs declined. Nonetheless, age-standardised DALY rates due to several high-burden NCDs (including osteoarthritis, drug use disorders, depression, diabetes, congenital birth defects, and skin, oral, and sense organ diseases) either increased or remained unchanged, leading to increases in their relative ranking in many geographies. From 2005 to 2015, HALE at birth increased by an average of 2.9 years (95% uncertainty interval 2.9-3.0) for men and 3.5 years (3.4-3.7) for women, while HALE at age 65 years improved by 0.85 years (0.78-0.92) and 1.2 years (1.1-1.3), respectively. Rising SDI was associated with consistently higher HALE and a somewhat smaller proportion of life spent with functional health loss; however, rising SDI was related to increases in total disability. Many countries and territories in central America and eastern sub-Saharan Africa had increasingly lower rates of disease burden than expected given their SDI. At the same time, a subset of geographies recorded a growing gap between observed and expected levels of DALYs, a trend driven mainly by rising burden due to war, interpersonal violence, and various NCDs. Interpretation Health is improving globally, but this means more populations are spending more time with functional health loss, an absolute expansion of morbidity. The proportion of life spent in ill health decreases somewhat with increasing SDI, a relative compression of morbidity, which supports continued efforts to elevate personal income, improve education, and limit fertility. Our analysis of DALYs and HALE and their relationship to SDI represents a robust framework on which to benchmark geography-specific health performance and SDG progress. Country-specific drivers of disease burden, particularly for causes with higher-than-expected DALYs, should inform financial and research investments, prevention efforts, health policies, and health system improvement initiatives for all countries along the development continuum.
|
|
| 2. |
- Burstein, R., et al.
(author)
-
Mapping 123 million neonatal, infant and child deaths between 2000 and 2017
- 2019
-
In: Nature. - : Nature Publishing Group. - 0028-0836 .- 1476-4687. ; 574:7778, s. 353-358
-
Journal article (peer-reviewed)abstract
- Since 2000, many countries have achieved considerable success in improving child survival, but localized progress remains unclear. To inform efforts towards United Nations Sustainable Development Goal 3.2—to end preventable child deaths by 2030—we need consistently estimated data at the subnational level regarding child mortality rates and trends. Here we quantified, for the period 2000–2017, the subnational variation in mortality rates and number of deaths of neonates, infants and children under 5 years of age within 99 low- and middle-income countries using a geostatistical survival model. We estimated that 32% of children under 5 in these countries lived in districts that had attained rates of 25 or fewer child deaths per 1,000 live births by 2017, and that 58% of child deaths between 2000 and 2017 in these countries could have been averted in the absence of geographical inequality. This study enables the identification of high-mortality clusters, patterns of progress and geographical inequalities to inform appropriate investments and implementations that will help to improve the health of all populations. © 2019, The Author(s).
|
|
| 3. |
|
|
| 4. |
|
|
| 5. |
- Kinyoki, DK, et al.
(author)
-
Mapping local patterns of childhood overweight and wasting in low- and middle-income countries between 2000 and 2017
- 2020
-
In: Nature medicine. - : Springer Science and Business Media LLC. - 1546-170X .- 1078-8956. ; 26:5, s. 750-759
-
Journal article (peer-reviewed)abstract
- A double burden of malnutrition occurs when individuals, household members or communities experience both undernutrition and overweight. Here, we show geospatial estimates of overweight and wasting prevalence among children under 5 years of age in 105 low- and middle-income countries (LMICs) from 2000 to 2017 and aggregate these to policy-relevant administrative units. Wasting decreased overall across LMICs between 2000 and 2017, from 8.4% (62.3 (55.1–70.8) million) to 6.4% (58.3 (47.6–70.7) million), but is predicted to remain above the World Health Organization’s Global Nutrition Target of <5% in over half of LMICs by 2025. Prevalence of overweight increased from 5.2% (30 (22.8–38.5) million) in 2000 to 6.0% (55.5 (44.8–67.9) million) children aged under 5 years in 2017. Areas most affected by double burden of malnutrition were located in Indonesia, Thailand, southeastern China, Botswana, Cameroon and central Nigeria. Our estimates provide a new perspective to researchers, policy makers and public health agencies in their efforts to address this global childhood syndemic.
|
|
| 6. |
- Pal, Shashank, et al.
(author)
-
Recent Advances in Catalytic Pyrolysis of Municipal Plastic Waste for the Production of Hydrocarbon Fuels
- 2022
-
In: Processes. - : MDPI. - 2227-9717. ; 10:8
-
Journal article (peer-reviewed)abstract
- Currently, the resources of fossil fuels, such as crude oil, natural gas, and coal, are depleting day by day due to increasing energy demands. Nowadays, plastic items have witnessed a substantial surge in manufacturing due to their wide range of applications and low cost. Therefore, the amount of plastic waste is increasing rapidly. Hence, the proper management of plastic wastes for sustainable technologies is the need of the hour. Chemical recycling technologies based on pyrolysis are emerging as the best waste management approaches due to their robustness and better economics. However, research on converting plastic waste into fuels and other value-added goods has yet to be undertaken, and more R&D is required to make waste-plastic-based fuels economically viable. In this review article, the current status of the plastic waste pyrolysis process is discussed in detail. Processcontrolling parameters such as temperature, pressure, residence time, reactor type, and catalyst dose are also investigated in this review paper. In addition, the application of reaction products is also described in brief. For example, plasto-oil obtained by catalytic pyrolysis may be utilized in various sectors, e.g., transportation, industrial boilers, and power generation. On the other hand, byproducts, such as solid residue (plasto-char), could be used as a road construction material or to make activated carbon or graphenes, while the non-condensable gases have a good potential to be utilized as heating/energy source.
|
|
| 7. |
- Rajendran, Krishna Moorthy, et al.
(author)
-
Effect of Plasto-Oil Blended with Diesel Fuel on the Performance and Emission Characteristics of Partly Premixed Charge Compression Ignition Engines with and without Exhaust Gas Recirculation (EGR)
- 2023
-
In: Energies. - : MDPI. - 1996-1073. ; 16:9
-
Journal article (peer-reviewed)abstract
- Municipal mixed plastic waste (MMPW) recycling is an innovative way to turn environmental waste into energy fuels. In the present study, a thermochemical process was applied to depolymerize MMPW to produce hydrocarbon fuels known as plasto-oil. The obtained plasto-oil was blended with conventional diesel to test the performance of the PCCI-mode single-cylinder, four-stroke, direct-injection diesel engine. The PCCI combustion mixture was tested with 15% and 30% fuel vapor to ensure homogeneity with and without exhaust gas recirculation. The modified engine findings were compared to a standard conventional engine. At higher loads, PCCI combustion showed reduced emission of carbon monoxide and nitrogen oxides. While the thermal braking efficiency was marginally reduced at all engine loads while using the blends. The results showed that with and without 10% exhaust gas recirculation, an increase in air mix reduced NOx emissions; however, in the case of smoke emissions, an opposite trend was observed. A blend of plasto-oils also decreased CO and unburned hydrocarbon (HC) emissions at higher loads. In conclusion, it was shown that plasto-oils combined with conventional diesel fuel outperformed diesel fuel alone.
|
|
| 8. |
- Sharma, Amit Kumar, et al.
(author)
-
Environment-Friendly Biodiesel/Diesel Blends for Improving the Exhaust Emission and Engine Performance to Reduce the Pollutants Emitted from Transportation Fleets
- 2020
-
In: International Journal of Environmental Research and Public Health. - : MDPI. - 1661-7827 .- 1660-4601. ; 17:11
-
Journal article (peer-reviewed)abstract
- Biodiesel derived from biomass is a renewable source of fuel, and global application of biodiesel in the transport sector has rapidly expanded over the last decade. However, effort has been made to overcome its main shortcoming, i.e., efficiency and exhaust emission characteristics (NOx emissions) in unmodified diesel engines. Biodiesel combustion generally results in lower unburned hydrocarbons (HC), carbon monoxide (CO), and particulate matter (PM) in exhaust emissions compared to fossil diesel. In this study, various biodiesel blends (Chlorella vulgaris, Jatropha curcus, and Calophyllum inophyllum) were investigated for fuel characteristics, and engine performance with exhaust emission compared to diesel. Chlorella vulgaris, Jatropha curcus, and Calophyllum inophyllum biodiesel were synthesized by the acid–base transesterification approach in a microwave reactor and blended with conventional diesel fuel by volume. The fuel blends were denoted as MB10 (90% diesel + 10% microalgae biodiesel), MB20 (80% diesel + 20% microalgae biodiesel), JB10 (90% diesel + 10% jatropha biodiesel), JB20 (80% diesel + 20% jatropha biodiesel), PB10 (90% diesel + 10% polanga biodiesel) and PB20 (80% diesel + 20% polanga biodiesel). Experiments were performed using these fuel blends with a single-cylinder four-stroke diesel engine at different loads. It was shown in the results that, at rated load, thermal efficiency of the engine decreased from 34.6% with diesel to 34.1%, 33.7%, 34.1%, 34.0%, 33.9%, and 33.5% with MB10, MB20, JB10, JB20, PB10, and PB20 fuels, respectively. Unburned hydrocarbon, carbon monoxide and smoke emissions improved with third-generation fuels (MB10, MB20) in comparison to base diesel fuel and second-generation fuels (JB10, JB20, PB10 and PB20). Oxides of nitrogen emissions were slightly increased with both the third- and second-generation fuels as compared to the base diesel. The combustion behavior of microalgae biodiesel was also very close to diesel fuels. In the context of comparable engine performance, emissions, and combustion characteristics, along with biofuel production yield (per year per acre), microalgae biodiesel could have a great potential as a next-generation sustainable fuel in compression engine (CI) engines compared to jatropha and polanga biodiesel fuels.
|
|
| 9. |
|
|
| 10. |
- Aggarwal, Ruchi, et al.
(author)
-
Nitrogen-Doped Carbon Nanoflakes by Acidic Charring of Microcrystalline Cellulose and Urea for the Rapid Removal of Imidacloprid from Water
- 2024
-
In: ACS Applied Nano Materials. - 2574-0970. ; 7:1, s. 1-10
-
Research review (peer-reviewed)abstract
- Herein, cellulose as a natural biomass along with urea was acid-charred to synthesize nitrogen-doped carbon nanoflakes (N-CNF). The as-prepared N-CNF was used to rapidly remove the effluent of agricultural waste containing an Imidacloprid (IMD) insecticide. The adsorption data fit well to nonlinearly in the Sips adsorption model, which is a mixed Langmuir-Freundlich model with an adsorption capacity of ∼104.9 mg g-1. The adsorption follows pseudo-second-order kinetics linearly and nonlinearly, and thermodynamic parameters reveal that the adsorption process was spontaneous and endothermic. The effect of pH and the interference of ions was also checked. Further, spiking of IMD in different soil, lake, and tap wastewater samples was also done to enhance the practical applicability of removing IMD by N-CNF. The antibacterial properties of N-CNF were checked on both Gram-negative and Gram-positive bacterial strains as Escherichia coli and Bacillus subtilus, respectively, where they showed nontoxic behavior up to the concentration of 2 mg mL-1
|
|
