| 1. |
- Svirskiy, G. I., et al.
(författare)
-
Comparative X-Ray Absorption Analysis of the Spectrum of Vacant Electronic States in Cobalt and Nickel Tetraphenylporphyrin Complexes
- 2018
-
Ingår i: Physics of the solid state. - 1063-7834 .- 1090-6460. ; 60:3, s. 581-591
-
Tidskriftsartikel (refereegranskat)abstract
- The energy distributions and the properties of the lower vacant electronic states in cobalt and nickel tetraphenylporphyrin complexes CoTPP and NiTPP are studied by X-ray absorption spectroscopy. Quasimolecular analysis of the experimental absorption spectra measured in the region of the 2p and 1s ionization thresholds of complexing metal atoms, as well as the 1s thresholds of ligand atoms (nitrogen and carbon), is based on the comparison of the corresponding spectra with each other and with the spectra of the simplest nickel porphyrin NiP. It has been established that, despite a general similarity of the spectra of nitrogen and carbon in CoTPP and NiTPP, the fine structure of the 2p and 1s absorption spectra of cobalt and nickel atoms are radically different. The observed differences in the spectra of cobalt and nickel are associated with the features of the energy distribution of vacant 3d electron states. The presence in CoTPP of the partially filled valence 3db2g molecular orbital (MO) results in the appearance in the cobalt spectra of a low-energy band, which is absent in the spectrum of nickel in NiTPP and leads to a doublet structure of transitions to b1g and e g MOs due to the exchange interaction between 3d electrons in partially filled 3db2g and 3db1g or 3de g MOs. The spectrum of vacant states in CoTPP differs from that in NiTPP also due to the smaller energy distance between 3db1g and e g MOs and the different positions of nonbonding MOs with the C2p character of the porphine ligand.
|
|
| 2. |
- Simonov, Konstantin, 1988-, et al.
(författare)
-
Effect of Substrate Chemistry on the Bottom-Up Fabrication of Graphene Nanoribbons : Combined Core-Level Spectroscopy and STM Study
- 2014
-
Ingår i: The Journal of Physical Chemistry C. - : American Chemical Society (ACS). - 1932-7447 .- 1932-7455. ; 118:23, s. 12532-12540
-
Tidskriftsartikel (refereegranskat)abstract
- Atomically precise graphene nanoribbons (GNRs) can be fabricated via thermally induced polymerization of halogen containing molecular precursors on metal surfaces. In this paper the effect of substrate reactivity on the growth and structure of armchair GNRs (AGNRs) grown on inert Au(111) and active Cu(111) surfaces has been systematically studied by a combination of core-level X-ray spectroscopies and scanning tunneling microscopy. It is demonstrated that the activation threshold for the dehalogenation process decreases with increasing catalytic activity of the substrate. At room temperature the 10,10'-dibromo-9,9'-bianthracene (DBBA) precursor molecules on Au(111) remain intact, while on Cu(111) a complete surface-assisted dehalogenation takes place. Dehalogenation of precursor molecules on Au(111) only starts at around 80 degrees C and completes at 200 degrees C, leading to the formation of linear polymer chains. On Cu(111) tilted polymer chains appear readily at room temperature or slightly elevated temperatures. Annealing of the DBBA/Cu(111) above 100 degrees C leads to intramolecular cyclodehydrogenation and formation of flat AGNRs at 200 degrees C, while on the Au(111) surface the formation of GNRs takes place only at around 400 degrees C. In STM, nanoribbons have significantly reduced apparent height on Cu(111) as compared to Au(111), 70 +/- 11 pm versus 172 +/- 14 pm, independently of the bias voltage. Moreover, an alignment of GNRs along low-index crystallographic directions of the substrate is evident for Cu(111), while on Au(111) it is more random. Elevating the Cu(111) substrate temperature above 400 degrees C results in a dehydrogenation and subsequent decomposition of GNRs; at 750 degrees C the dehydrogenated carbon species self-organize in graphene islands. In general, our data provide evidence for a significant influence of substrate reactivity on the growth dynamics of GNRs.
|
|
| 3. |
- Jacobse, Peter H., et al.
(författare)
-
One Precursor but Two Types of Graphene Nanoribbons : On-Surface Transformations of 10,10'-Dichloro-9,9'-bianthryl on Ag(111)
- 2019
-
Ingår i: The Journal of Physical Chemistry C. - : American Chemical Society (ACS). - 1932-7447 .- 1932-7455. ; 123:14, s. 8892-8901
-
Tidskriftsartikel (refereegranskat)abstract
- On-surface synthesis has emerged in the last decade as a method to create graphene nanoribbons (GNRs) with atomic precision. The underlying premise of this bottom-up strategy is that precursor molecules undergo a well-defined sequence of inter- and intramolecular reactions, leading to the formation of a single product. As such, the structure of the GNR is encoded in the precursors. However, recent examples have shown that not only the molecule, but also the coinage metal surface on which the reaction takes place, plays a decisive role in dictating the nanoribbon structure. In this work, we use scanning probe microscopy and X-ray photoelectron spectroscopy to investigate the behavior of 10,10'-dichloro-9,9'-bianthryl (DCBA) on Ag(111). Our study shows that Ag(111) can induce the formation of both seven-atom wide armchair GNRs (7-acGNRs) and 3,1-chiral GNRs (3,1-cGNRs), demonstrating that a single molecule on a single surface can react to different nanoribbon products. We additionally show that coadsorbed dibromoperylene can promote surface-assisted dehydrogenative coupling in DCBA, leading to the exclusive formation of 3,1-cGNRs.
|
|
| 4. |
- Martin, Natalia M., et al.
(författare)
-
Surface/Interface Effects by Alkali Postdeposition Treatments of (Ag,Cu)(In,Ga)Se2 Thin Film Solar Cells
- 2022
-
Ingår i: ACS Applied Energy Materials. - : American Chemical Society (ACS). - 2574-0962. ; 5:1, s. 461-468
-
Tidskriftsartikel (refereegranskat)abstract
- Ag alloying and the introduction of alkali elements through a postdeposition treatment are two approaches to improve the performance of Cu(In,Ga)Se2 (CIGS) thin film solar cells. In particular, a postdeposition treatment of an alkali metal fluoride of the absorber has shown a beneficial effect on the solar cells performance due to an increase in the open circuit voltage (VOC) for both (Ag,Cu)(In,Ga)Se2 (ACIGS) and CIGS based solar cells. Several reasons have been suggested for the improved VOC in CIGS solar cells including absorber surface and interface effects. Less works investigated how the applied postdeposition treatment influences the ACIGS absorber surface and interface properties and the subsequent buffer layer growth. In this work we employed hard X-ray photoelectron spectroscopy to study the chemical and electronic properties at the real functional interface between a CdS buffer and ACIGS absorbers that have been exposed to different alkali metal fluoride treatments during preparation. All samples show an enhanced Ag content at the CdS/ACIGS interface as compared to ACIGS bulk-like composition, and it is also shown that this enhanced Ag content anticorrelates with Ga content. The results indicate that the absorber composition at the near-surface region changes depending on the applied alkali postdeposition treatment. The Cu and Ga decrease and the Ag increase are stronger for the RbF treatment as compared to the CsF treatment, which correlates with the observed device characteristics. This suggests that a selective alkali postdeposition treatment could change the ACIGS absorber surface composition, which can influence the solar cell behavior.
|
|
| 5. |
- Sterling, Cody M., et al.
(författare)
-
Sensitivity of Nitrogen K-Edge X-ray Absorption to Halide Substitution and Thermal Fluctuations in Methylammonium Lead-Halide Perovskites
- 2021
-
Ingår i: The Journal of Physical Chemistry C. - : American Chemical Society (ACS). - 1932-7447 .- 1932-7455. ; 125:15, s. 8360-8368
-
Tidskriftsartikel (refereegranskat)abstract
- The performance of hybrid perovskite materials in solar cells crucially depends on their electronic properties, and it is important to investigate contributions to the total electronic structure from specific components in the material. In a combined theoretical and experimental study of CH3NH3PbI3-methylammonium lead triiodide (MAPI)-and its bromide cousin CH3NH3PbBr3 (MAPB), we analyze nitrogen K-edge (N Is-to-2p*) X-ray absorption (XA) spectra measured in MAPI and MAPB single crystals. This permits comparison of spectral features to the local character of unoccupied molecular orbitals on the CH3NH3+ (MA(+)) counterions and allows us to investigate how thermal fluctuations, hydrogen bonding, and halide-ion substitution influence the XA spectra as a measure of the local electronic structure. In agreement with the experiment, the simulated spectra for MAPI and MAPB show close similarity, except that the MAPB spectral features are blue-shifted by +0.31 eV. The shift is shown to arise from the intrinsic difference in the electronic structure of the two halide atoms rather than from structural differences between the materials. In addition, from the spectral sampling analysis of molecular dynamics simulations, clear correlations between geometric descriptors(N-C, N-H, and H center dot center dot center dot I/Br distances) and spectral features are identified and used to explain the spectral shapes.
|
|
