| 1. |
- Ali, Abdullah, 1985-, et al.
(författare)
-
Relationship between sensorial and physical characteristics of topical creams : A comparative study on effects of excipients
- 2022
-
Ingår i: International Journal of Pharmaceutics. - : Elsevier B.V.. - 0378-5173 .- 1873-3476. ; 613
-
Tidskriftsartikel (refereegranskat)abstract
- Rising consumer demands for safer, more natural, and sustainable topical products have led to increased interest in finding alternative excipients, while retaining functionality and cosmetic appeal. Particle-stabilized Pickering creams have emerged as possible alternatives to replace traditional surfactant-stabilized creams and are thus one of the focuses in this study. The aim of this paper was to study relationships between sensorial characteristics and physical properties to understand how different excipients affect these aspects, comparing one starch particle–stabilized and three surfactant-stabilized formulations. A human panel was used to evaluate sensorial perception, while physical properties were deduced by rheology and tactile friction, together with in vivo and ex vivo skin hydration measurements. The results show that sensorial attributes related to the application phase can be predicted with rheology, while afterfeel attributes can be predicted with tactile friction studies. Differences in rheological and sensory properties among surfactant-based creams could mainly be attributed to the type of emollients used, presence of thickeners and surfactant composition. Differences between surfactant-based creams and a Pickering cream were more evident in relation to the afterfeel perception. Presence of starch particles in the residual film on skin results in high tactile friction and low perception of residual coating, stickiness, greasiness, and slipperiness in sensorial afterfeel. © 2021 The Authors
|
|
| 2. |
- Ali, Abdullah, 1985-, et al.
(författare)
-
Tactile friction of topical creams and emulsions : Friction measurements on excised skin and VitroSkin® using ForceBoard™
- 2022
-
Ingår i: International Journal of Pharmaceutics. - : Elsevier B.V.. - 0378-5173 .- 1873-3476. ; 615
-
Tidskriftsartikel (refereegranskat)abstract
- Tactile perception can be investigated through ex vivo friction measurements using a so–called ForceBoard™, providing objective assessments and savings in time and money, compared to a subjective human panel. In this work we aim to compare excised skin versus VitroSkin® as model substrates for tactile friction measurements. A further aim is to detect possible differences between traditional surfactant-based creams, and a particle-stabilized (Pickering) cream and investigate how the different substrates affect the results obtained. It was found that the difference in tactile friction between excised skin and VitroSkin® was small on untreated substrates. When topical creams were applied, the same trends were observed for both substrates, although the frictional variation over time relates to the difference in surface structure between the two substrates. The results also confirmed that there is a difference between starch-based Pickering formulations and surfactant-based creams after application, indicating that the latter is greasier than Pickering cream. It was also shown that the tactile friction of Pickering emulsions was consistently high even with high amounts of oil, indicating a non-greasy, and non-sticky formulation. The characteristics of starch-stabilized Pickering formulations make them promising candidates in the development of surfactant-free topical formulations with unique tactile properties. © 2022 The Authors
|
|
| 3. |
- Arvidsson, M., et al.
(författare)
-
Feeling fine - the effect of topography and friction on perceived roughness and slipperiness
- 2017
-
Ingår i: Biotribology. - : Elsevier Ltd. - 2352-5738. ; 11, s. 92-101
-
Tidskriftsartikel (refereegranskat)abstract
- (1) Background. To design materials with specific haptic qualities, it is important to understand both the contribution of physical attributes from the surfaces of the materials and the perceptions that are involved in the haptic interaction. (2) Methods. A series of 16 wrinkled surfaces consisting of two similar materials of different elastic modulus and 8 different wrinkle wavelengths were characterized in terms of surface roughness and tactile friction coefficient. Sixteen participants scaled the perceived Roughness and Slipperiness of the surfaces using free magnitude estimation. Friction experiments were performed both by participants and by a trained experimenter with higher control. (3) Results and discussion. The trends in friction properties were similar for the group of participants performing the friction measurements in an uncontrolled way and the experiments performed under well-defined conditions, showing that the latter type of measurements represent the general friction properties well. The results point to slipperiness as the key perception dimension for textures below 100 μm and roughness above 100 μm. Furthermore, it is apparent that roughness and slipperiness perception of these types of structures are not independent. The friction is related to contact area between finger and material. Somewhat surprising was that the material with the higher elastic modulus was perceived as more slippery. A concluding finding was that the flat (high friction) reference surfaces were scaled as rough, supporting the theory that perceived roughness itself is a multidimensional construct with both surface roughness and friction components.
|
|
| 4. |
- Arvidsson, Martin, et al.
(författare)
-
Multidimensional psychophysics : Surface feel of printing paper as a function of physical properties
- 2009
-
Ingår i: Fechner Day 2009. - Galway, Irland : International Society for Psychophysics. ; , s. 215-220
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- The aim of this experiment was to explore the perception of tactile surface-feel of 21 printing papers. A multidimensional scaling (MDS) experiment was conducted with 20 women. They scaled similarity among all possible pairs of the papers. Similarity measurements were mapped by INDSCAL and modeled with PREFMAP. Test-retest and concordance coefficients were high. It is not yet established what physical properties best determine tactile feel. It seems likely though that finger friction and surface roughness are strong contenders. Finger friction for the papers was measured as a ratio of friction force to normal force;(while stroking a human finger on the surface. Average surface roughness was measured with a profilometer. Physical properties were rotated into the 3D INDSCAL solution. This solution identified and mapped the tactile surface feel of the papers in an interpretable way with regard to i.e. friction, surface roughness and weight.
|
|
| 5. |
- Harris, Kathryn L, et al.
(författare)
-
A Sticky Situation or Rough Going? : Influencing Haptic Perception of Wood Coatings Through Frictional and Topographical Design
- 2021
-
Ingår i: Tribology letters. - : Springer. - 1023-8883 .- 1573-2711. ; 69:3
-
Tidskriftsartikel (refereegranskat)abstract
- Improving the tactile aesthetics of products that can be described as touch intensive is an increasing priority within many sectors, including the furniture industry. Understanding which physical characteristics contribute to the haptic experience of a surface, and how, is therefore highly topical. It has earlier been shown that both friction and topography affect tactile perception. Thus, two series of stimuli have been produced using standard coating techniques, with systematic variation in (physical) friction and roughness properties. This was achieved through appropriate selection of matting agents and resins. The stimuli sets were then evaluated perceptually to determine the extent to which discrimination between pairs of surfaces followed the systematic materials variation. In addition to investigating the role of the physical properties in discrimination of the surfaces, their influence on perceived pleasantness and naturalness was also studied. The results indicate that changes in tactile perception can be understood in terms of friction and roughness, and that varying the matting agents (topography) and resins (material properties) in the coatings provide the controlling factors for furniture applications. Perceived pleasantness is associated with low friction and smoother topography, whilst perceived naturalness is found to be described by an interaction between tactile friction and the average maximum peak height of the surface features. Graphic Abstract: [Figure not available: see fulltext.] © 2021, The Author(s).
|
|
| 6. |
- Skedung, Lisa, et al.
(författare)
-
A Curly Q : Is Frizz a Matter of Friction?
- 2021
-
Ingår i: Perception. - : SAGE Publications. - 0301-0066 .- 1468-4233. ; 50:8, s. 728-732
-
Tidskriftsartikel (refereegranskat)abstract
- The oft discussed and fretted over environmental influences on hair have led to a popular consensus which suggests that elevated temperature and humidity lead to frizzier, wilder hair. However, few attempts at actually quantifying these effects have been made. Although frizziness is usually perceived visually, here the influence of variations in temperature and humidity on the tactile perception and friction of curly and straight hair were investigated. It is shown that changes in humidity may disproportionately affect perceived frizziness of curly hair by touch due to concurrent changes in the tactile friction.
|
|
| 7. |
- Skedung, Lisa, et al.
(författare)
-
Feeling smooth : Psychotribological probing of molecular composition
- 2018
-
Ingår i: Tribology letters. - : Springer. - 1023-8883 .- 1573-2711. ; 66:4, s. 1-10
-
Tidskriftsartikel (refereegranskat)abstract
- The aim of this study was to evaluate whether smooth surfaces varying in surface chemistry could be perceptually distinguished with the sense of touch. A set of ten glass surfaces was prepared which varied systematically in terms of the molecular composition of a thin coating of low topography. The contact angle, contact angle hysteresis, and surface energy were evaluated as objective physical parameters characterizing each coating. Additionally, the interaction forces between a human finger and the different coatings were quantified and compared in terms of tactile friction coefficients. The surfaces were evaluated psychophysically in terms of perceived similarities and were then ranked according to pleasantness. The participants could perceptually distinguish between surfaces varying in surface chemistry and a primary and secondary perceptual dimension were identified as sufficient to distinguish them. The primary dimension correlates with surface free energy, but both tactile friction and surface energy contribute to this dimension depending on whether the coatings are organic or inorganic. The secondary dimension could not be identified explicitly in terms of a physical quantity but is discussed in terms of recent developments in the literature. Coated glass is characterized by high friction coefficient upon interaction with a human finger as well as significant hysteresis in the stroking directions (lower applied load and higher friction in the backward stroke). Despite the complexity of the tribology, pleasantness can be clearly linked to it, where low friction (high contact angle) materials receive a higher ranking. © The Author(s) 2018.
|
|
| 8. |
- Skedung, Lisa, et al.
(författare)
-
FINE-TUNING THE TACTILE PERCEPTION OF COATINGS
- 2021
-
Ingår i: European Coatings Journal. - 0930-3847. ; 6, s. 32-37
-
Tidskriftsartikel (övrigt vetenskapligt/konstnärligt)abstract
- Human tactile evaluations were combined with tactile friction measurements to quantify the perceptual experience of touching coated panels. Monosized beads of nine different polymer compositions were added to a soft-touch waterborne two-component PUR coating. Introducing beads of different composition affected tactile perception.
|
|
| 9. |
- Skedung, Lisa, et al.
(författare)
-
The finishing touches : the role of friction and roughness in haptic perception of surface coatings
- 2020
-
Ingår i: Experimental Brain Research. - : Springer Nature. - 0014-4819 .- 1432-1106. ; 238:6, s. 1511-1524
-
Tidskriftsartikel (refereegranskat)abstract
- Humans are extraordinarily skilled in the tactile evaluation of, and differentiation between, surfaces. The chemical and mechanical properties of these surfaces are translated into tactile signals during haptic exploration by mechanoreceptors in our skin, which are specialized to respond to different types of temporal and mechanical stimulation. Describing the effects of measurable physical characteristics on the human response to tactile exploration of surfaces is of great interest to manufacturers of household materials so that the haptic experience can be considered during design, product development and quality control. In this study, methods from psychophysics and materials science are combined to advance current understanding of which physical properties affect tactile perception of a range of furniture surfaces, i.e., foils and coatings, thus creating a tactile map of the furniture product landscape. Participants' responses in a similarity scaling task were analyzed using INDSCAL from which three haptic dimensions were identified. Results show that specific roughness parameters, tactile friction and vibrational information, as characterized by a stylus profilometer, a Forceboard, and a biomimetic synthetic finger, are important for tactile differentiation and preferences of these surface treatments. The obtained dimensions are described as distinct combinations of the surface properties characterized, rather than as 'roughness' or 'friction' independently. Preferences by touch were related to the roughness, friction and thermal properties of the surfaces. The results both complement and advance current understanding of how roughness and friction relate to tactile perception of surfaces.
|
|
