| 1. |
|
|
| 2. |
- Basaiawmoit, R V, et al.
(författare)
-
SAXS Models of TGFBIp Reveal a Trimeric Structure and Show That the Overall Shape Is Not Affected by the Arg124His Mutation
- 2011
-
Ingår i: JOURNAL OF MOLECULAR BIOLOGY. - : Elsevier Science B.V., Amsterdam. - 0022-2836. ; 408:3, s. 503-513
-
Tidskriftsartikel (refereegranskat)abstract
- Human transforming growth factor beta induced protein (TGFBIp) is composed of 683 residues, including an N-terminal cysteine-rich (EMI) domain, four homologous fasciclin domains, and an Arg-Gly-Asp (RGD) motif near the C-terminus. The protein is of interest because mutations in the TGFBI gene encoding TGFBIp lead to corneal dystrophy (CD), a condition where protein aggregates within the cornea compromise transparency. The complete three-dimensional structure of TGFBIp is not yet available, with the exception of a partial X-ray structure of the archetype FAS1 domain derived from Drosophila fasciclin-1. In this study, small-angle X-ray scattering (SAXS) models of intact wild-type (WT) human TGFBIp and a mutant (R124H) are presented. The mutation R124H leads to a variant of granular CD. The deduced structure of the TGFBIp monomer consists of four FAS1 domains in a simple "beads-on-a-string" arrangement, constructed by the superimposition of four consecutive Drosophila fasciclin domains. The SAXS-based model of the TGFBIp R124H mutant displayed no structural differences from WT. Both WT TGFBIp and the R124H mutant formed trimers at higher protein concentrations. The similar association properties and three-dimensional shape of the two proteins suggest that the mutation does not induce any major structural rearrangements, but points towards the role of other corneal-specific factors in the formation of corneal R124H deposits.
|
|
| 3. |
- Sahin, Cagla, et al.
(författare)
-
Structural Basis for Dityrosine-Mediated Inhibition of α-Synuclein Fibrillization
- 2022
-
Ingår i: Journal of the American Chemical Society. - : American Chemical Society (ACS). - 0002-7863 .- 1520-5126. ; 144:27, s. 11949-11954
-
Tidskriftsartikel (refereegranskat)abstract
- α-Synuclein (α-Syn) is an intrinsically disordered protein which self-assembles into highly organized β-sheet structures that accumulate in plaques in brains of Parkinson’s disease patients. Oxidative stress influences α-Syn structure and self-assembly; however, the basis for this remains unclear. Here we characterize the chemical and physical effects of mild oxidation on monomeric α-Syn and its aggregation. Using a combination of biophysical methods, small-angle X-ray scattering, and native ion mobility mass spectrometry, we find that oxidation leads to formation of intramolecular dityrosine cross-linkages and a compaction of the α-Syn monomer by a factor of √2. Oxidation-induced compaction is shown to inhibit ordered self-assembly and amyloid formation by steric hindrance, suggesting an important role of mild oxidation in preventing amyloid formation.
|
|
| 4. |
- Sörensen, MH, et al.
(författare)
-
Expansion of the F127-templated mesostructure in aerosol-generated particles by using polypropylene glycol as a swelling agent
- 2008
-
Ingår i: Microporous and Mesoporous Materials. - 1387-1811 .- 1873-3093. ; 113, s. 1-13
-
Tidskriftsartikel (refereegranskat)abstract
- Expansion of the mesostructure in aerosol generated particles was performed through incorporation of polypropylene glycol (PPG), a non-volatile swelling agent. TEOS was used as silica source and the Pluronic block copolymer, F127, as template. The ratio of TEOS to F127 was kept constant during synthesis, while varying the weight ratio of PPG to F127 systematically. The impact of the PPG on the expansion of the structure was characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and nitrogen adsorption. Different methods were used to calculate the pore size distributions, the BJH, the BdB-FHH, the KJS and the NLDFT method. Simple geometrical models of the expansion were derived to interpret the experimental data and establish their accuracy. Experimental data showed a roughly linear expansion of the unit cell and pore size, consistent with that expected by modelling the swelling of a hexagonal (p6mm) structure assuming constant wall thickness. The expansion is increasing as a function of increasing PPG/F127 ratio by about 25 Å. An expression of the density of the silica wall was calculated from the models resulting in a density of 1.95±0.2 g/cm3. At a PPG/F127 ratio of approximately 0.31, the p6mm structure (found at lower PPG/F127 ratios) transforms to a microemulsion-templated foam structure. At an even higher PPG/F127 ratio (0.63-1.56), phase separation of the oil from the swollen template occurred, yielding a two-phase system of coexisting foam and large vesicles.
|
|
| 5. |
- Claesson, Per M., et al.
(författare)
-
Bottle-brush polymers : Adsorption at surfaces and interactions with surfactants
- 2010
-
Ingår i: Advances in Colloid and Interface Science. - : Elsevier BV. - 0001-8686 .- 1873-3727. ; 155:1-2, s. 50-57
-
Tidskriftsartikel (refereegranskat)abstract
- Solution and adsorption properties of both charged and uncharged bottle-brush polymers have been investigated. The solution conformation and interactions in solution have been investigated by small-angle scattering techniques. The association of the bottle-brush polymers with anionic surfactants has also been studied. Surfactant binding isotherm measurements, NMR, surface tension measurements, as well as SAXS, SANS and light scattering techniques were utilized for understanding the association behaviour in bulk solutions. The adsorption of the bottle-brush polymers onto oppositely charged surfaces has been explored using a battery of techniques, including reflectometry, ellipsometry, quartz crystal microbalance, and neutron reflectivity. The combination of these techniques allowed determination of adsorbed mass, layer thickness, water content, and structural changes occurring during layer formation. The adsorption onto mica was found to be very different to that on silica, and an explanation for this was sought by employing a lattice mean-field theory. The model was able to reproduce a number of salient experimental features characterizing the adsorption of the bottle-brush polymers over a wide range of compositions, spanning from uncharged bottle-brushes to linear polyelectrolytes. This allowed us to shed light on the importance of electrostatic surface properties and non-electrostatic surface-polymer affinity for the adsorption. The interactions between bottle-brush polymers and anionic surfactants in adsorbed layers have also been elucidated using ellipsometry, neutron reflectivity and surface force measurements.
|
|
| 6. |
|
|
| 7. |
- Pedersen, S. S., et al.
(författare)
-
Internet-Delivered, Therapist-Assisted Treatment for Anxiety and Depression in Patients with Cardiovascular Disease : Evidence-Base and Challenges
- 2023
-
Ingår i: Current Cardiology Reports. - : Springer Nature. - 1523-3782 .- 1534-3170. ; 25:6, s. 443-453
-
Tidskriftsartikel (refereegranskat)abstract
- Purpose of Review: This review focuses on the efficacy of internet-based psychological interventions for patients with cardiovascular disease (CVD) and comorbid anxiety and depression. Anxiety and depression comprise barriers for treatment adherence and are associated with poorer patient-reported and clinical outcomes, and greater health care costs.Recent Findings: Internet-based, therapist-assisted interventions targeting anxiety and depression can be as efficacious as face-to-face therapy and may have some advantages, as patients can do it from their own laptop/smartphone at home at a time of their convenience, which may facilitate a better integration in their lives.Summary: To enhance the field of internet-based therapy for patients with CVD, we need to involve patients in the development of interventions, focus on developing standards for adherence and assessment of fidelity, and assess and augment health literacy in patients to safeguard equality in health care.
|
|
| 8. |
- Schmitt, Julien, et al.
(författare)
-
Outset of the Morphology of Nanostructured Silica Particles during Nucleation Followed by Ultrasmall-Angle X-ray Scattering
- 2016
-
Ingår i: Langmuir. - : American Chemical Society (ACS). - 0743-7463 .- 1520-5827. ; 32:20, s. 5162-5172
-
Tidskriftsartikel (refereegranskat)abstract
- Nucleation and growth of SBA-15 silica nanostructured particles with well-defined morphologies has been followed with time by small-angle X-ray scattering (SAXS) and ultrasmall-angle X-ray scattering (USAXS), using synchrotron radiation. Three different morphologies have been compared: platelets, toroids, and rods. SEM observations of the particles confirm that two key physical parameters control the morphology: the temperature and the stirring of the solution. USAXS curves demonstrate that primary particles with a defined shape are present very early in the reaction mixture, immediately after a very fast nucleation step. This nucleation step is detected at 10 min (56 degrees C) or 15 min (50 degrees C) after the addition of the silica precursor. The main finding is that the USAXS signal is different for each type of morphology, and we demonstrate that the difference is related to the shape of the particles, showing characteristic form factors for the different morphologies (platelet, toroid, and rod). Moreover, the size of the mesocrystal domains is correlated directly with the particle dimensions and shape. When stirred, aggregation between primary particles is detected even after 12 min (56 degrees C). The platelet morphology is promoted by constant stirring of the solution, through an oriented aggregation step between primary particles. In contrast, toroids and rods are only stabilized under static conditions. However, for toroids, aggregation is detected almost immediately after nucleation.
|
|
