| 1. |
- Andrén, Thomas, 1954-, et al.
(författare)
-
IODP expedition 347 : Baltic Sea basin paleoenvironment and biosphere
- 2015
-
Ingår i: Scientific Drilling. - : Copernicus GmbH. - 1816-8957 .- 1816-3459. ; 20, s. 1-12
-
Tidskriftsartikel (refereegranskat)abstract
- The Integrated Ocean Drilling Program (IODP) expedition 347 cored sediments from different settings of the Baltic Sea covering the last glacial–interglacial cycle. The main aim was to study the geological development of the Baltic Sea in relation to the extreme climate variability of the region with changing ice cover and major shifts in temperature, salinity, and biological communities. Using the Greatship Manisha as a European Consortium for Ocean Research Drilling (ECORD) mission-specific platform, we recovered 1.6 km of core from nine sites of which four were additionally cored for microbiology. The sites covered the gateway to the North Sea and Atlantic Ocean, several sub-basins in the southern Baltic Sea, a deep basin in the central Baltic Sea, and a river estuary in the north.The waxing and waning of the Scandinavian ice sheet has profoundly affected the Baltic Sea sediments. During theWeichselian, progressing glaciers reshaped the submarine landscape and displaced sedimentary deposits from earlier Quaternary time. As the glaciers retreated they left a complex pattern of till, sand, and lacustrine clay, which in the basins has since been covered by a thick deposit of Holocene, organic-rich clay. Due to the stratified water column of the brackish Baltic Sea and the recurrent and widespread anoxia, the deeper basins harbor laminated sediments that provide a unique opportunity for high-resolution chronological studies.The Baltic Sea is a eutrophic intra-continental sea that is strongly impacted by terrestrial runoff and nutrient fluxes. The Holocene deposits are recorded today to be up to 50m deep and geochemically affected by diagenetic alterations driven by organic matter degradation. Many of the cored sequences were highly supersaturated with respect to methane, which caused strong degassing upon core recovery. The depth distributions of conservative sea water ions still reflected the transition at the end of the last glaciation from fresh-water clays to Holocene brackish mud. High-resolution sampling and analyses of interstitial water chemistry revealed the intensive mineralization and zonation of the predominant biogeochemical processes. Quantification of microbial cells in the sediments yielded some of the highest cell densities yet recorded by scientific drilling.
|
|
| 2. |
- Apler, Anna, 1980-, et al.
(författare)
-
Dispersal of cellulose fibers and metals from contaminated sediments of industrial origin in an estuary
- 2020
-
Ingår i: Environmental Pollution. - : Elsevier BV. - 0269-7491 .- 1873-6424. ; 266:3
-
Tidskriftsartikel (refereegranskat)abstract
- The boreal forest’s pulp and paper industry plays a major role in economic prosperity but, historically, caused an environmental burden. Remnants of discharges of contaminated suspended solids (fiberbanks) are continuously being discovered on the beds of shallow seas, rivers and lakes in the northern hemisphere. We investigated the dispersion of Cd, Cr, Cu, Hg, Ni, Pb and Zn from deeper to surficial layers in fiberbanks in a Swedish estuary and the larger-scale transport of the same metals to distal areas of sediment accumulation. We also tested the C:N ratio as a common denominator for these anthropogenic, cellulose-rich deposits. Sampling and analyses of three fiberbanks located in the inner part of the estuary and from sediment accumulation sites outside and along the estuary reveals that metal concentrations are regressing to background levels towards the surface at the accumulation sites. The fiberbanks show a higher degree of contamination and C:N ratios demonstrate inclusion of cellulose fibers. C:N ratios also indicate that there is currently no significant transport of fiberbank material into the distal areas. A ∼10 cm natural cap of recently settled fine-grained sediment covering one of the fiberbanks seems to prevent metals dispersing into overlying water whereas the other two fiberbanks show signs of metal enrichment and potential mercury methylation in surficial layers. Although the estuarine system seems to recover from the impact of industrial waste, there is no evidence that the fiberbanks will be remediated naturally but instead will continue to threaten the aquatic environment.
|
|
| 3. |
- Apler, Anna, 1980-, et al.
(författare)
-
Distribution and dispersal of metals in contaminated fibrous sediments of industrial origin
- 2019
-
Ingår i: Chemosphere. - : Elsevier BV. - 0045-6535 .- 1879-1298. ; 215, s. 470-481
-
Tidskriftsartikel (refereegranskat)abstract
- Industrial emissions can impact aquatic environments and unregulated discharges from pulp and paper factories have resulted in deposits of cellulose fiber along the Swedish coast. These deposits are contaminated by metals, but due to their unique fibrous character the extent of sorption and dispersal of the metals is unclear. Fibrous sediments were sampled at two sites in the Ångermanälven river estuary, Sweden. The partitioning of metals between the sediment, pore water and bottom water was investigated and the degree of bioavailability was evaluated. The levels of metals in the sediment were high in fibrous or offshore samples, depending on the metal, whereas the levels of dissolved metals in pore water were low or below the limit of quantification. Partition coefficients (KD) showed that sorption to the sediment was stronger at one of the fibrous sites, possibly related to the type and size of organic matter. Undisturbed bottom water samples contained low levels of both dissolved and particle bound metals, but when comparing measured metal concentrations to threshold values of ecological status and ecotoxicological assessment criteria, both sediments and bottom water may be detrimental to living organisms. In-situ re-suspension experiments showed that the concentrations of particle bound metals increased whereas the dissolved concentrations decreased. The analyzed metals are probably retained by the solid phases of the fibrous sediment or adsorbed to particles in the water, reducing their bioavailability.
|
|
| 4. |
- Dahlberg, Anna-Karin, et al.
(författare)
-
Capping fiberbank sediments to reduce persistent organic pollutants (POPs) fluxes : A large-scale laboratory column experiment
- 2023
-
Ingår i: Environmental Pollution. - : Elsevier BV. - 0269-7491 .- 1873-6424. ; 333
-
Tidskriftsartikel (refereegranskat)abstract
- Deposits of contaminated wood fiber waste (fiberbanks), originating from sawmills and pulp and paper industries, have been found in the aquatic environment in boreal countries. In-situ isolation capping has been proposed as a remediation solution because it has the potential to prevent dispersal of persistent organic pollutants (POPs) from this type of sediment. However, knowledge about the performance of such caps when placed on very soft (un-consolidated), gaseous organic rich sediment is scarce. We investigated the effectiveness of conventional in-situ capping to limit POPs fluxes to the water column from contaminated fibrous sediments that produce gas. A controlled, large-scale laboratory column (40 cm diameter, 2 m height) experiment was performed over 8 months to study changes in sediment-to-water fluxes of POPs and particle resuspension before and after capping the sediment with crushed stones (& GE;4 mm grain size). Two different cap thicknesses were tested (20 and 45 cm) on two types of fiberbank sediment with different fiber type composition. Results showed that capping fiberbank sediment with a 45 cm gravel cap reduced the sediment-to-water flux by 91-95% for p,p'-DDD, o,p'-DDD, by 39-82% for CB-101, CB-118, CB-138, CB-153, CB-180 and by 12-18% for HCB, whereas for less hydrophobic PCBs, capping was largely ineffective (i.e. CB-28 and CB-52). Although cap application caused particle resus-pension, the long-term effect of the cap was reduced particle resuspension. On the other hand, substantial sediment consolidation released large volumes of contaminated pore water into the overlying water body. Importantly, both sediment types produced large amount of gas, observed as gas voids forming inside the sediment and gas ebullition events, which increased pore water advection and affected the structural integrity of the cap. This may limit the practical applicability of this method on fiberbank sediments.
|
|
| 5. |
- Dahlberg, Anna-Karin, et al.
(författare)
-
Dispersal of persistent organic pollutants from fiber-contaminated sediments : biotic and abiotic pathways
- 2021
-
Ingår i: Journal of Soils and Sediments. - : Springer Science and Business Media LLC. - 1439-0108 .- 1614-7480. ; 21:4, s. 1852-1865
-
Tidskriftsartikel (refereegranskat)abstract
- PurposeNumerous sites contaminated with fiber emissions from pulp and paper industries are found in coastal areas of the Baltic Sea, but there is limited knowledge about the magnitude of dispersal of persistent organic pollutants (POPs) from these anthropogenic, organic-rich sediments called fiberbanks. The aim of this study was to quantify and compare different POP dispersal pathways from such fiberbanks. Dispersal mechanisms studied included abiotic and biotic routes (dissolved in water, particle-bound, and bioaccumulation).Materials and methodsContaminated fibrous sediments located in Ångermanälven River estuary in north-eastern Sweden were studied in sediment types representing different fiber content (i.e., fiberbanks, fiber-rich sediments, and less fiber impacted sediments). Sediment-to-water fluxes of dissolved contaminants (polychlorinated biphenyls (PCBs), hexachlorobenzene (HCB), and dichlorodiphenyltrichloroethane (DDT)) were measured in situ using benthic flux chambers. Particle resuspension was measured by sampling bottom water, before and after disturbing the sediment surface. Benthic biota was collected to determine the body burden of contaminants and to determine biota-pore water accumulation factors (BAFPW) and biota-sediment accumulation factors (BSAFs). In addition, concentrations of dissolved POPs in the water column were measured in field using passive samplers. Instrumental analysis was performed using gas chromatography coupled to a triple quadrupole mass spectrometer (GC-MS/MS).Results and discussionThe flux of dissolved Σ20PCBs was approximately two times higher from one of the investigated fiberbanks (3.4 ng m− 2 day− 1) compared to the other. The average particle burden of PCBs was also higher at this fiberbank after artificial disturbance (15 ng g−1 particle), which indicates that larger amounts of contaminants are likely to disperse via particle resuspension from this site compared to the other fiberbank (4.8 ng g− 1 particle). The difference might be associated with a layer of recently settled minerogenic material that covers one of the fiberbanks, which probably functions as a protective barrier. The lack of benthic biota implies that contaminant release by bioturbation is negligible in the studied fiberbanks. However, benthic biota from fiber-rich sediment showed bioaccumulation and biomagnification of contaminants.ConclusionsThe importance of diffusive flux from fiberbanks under undisturbed conditions became apparent when the different dispersal pathways were quantified. However, no dispersal pathway could be judged as irrelevant, since even under undisturbed conditions, advective particle transport was significant. Additionally, the uptake by biota and trophic transfer can be considerable. Quantification of dispersal routes and understanding of the relative importance of various pathways is critical for proper risk assessment and management of contaminated sediments.
|
|
| 6. |
- Frogner-Kockum, Paul, et al.
(författare)
-
Less metal fluxes than expected from fibrous marine sediments
- 2020
-
Ingår i: Marine Pollution Bulletin. - : Elsevier BV. - 0025-326X .- 1879-3363. ; 150
-
Tidskriftsartikel (refereegranskat)abstract
- © 2019 Deposits of fibrous sediment, which include fiberbanks and fiber-rich sediments, are known to exist on the Swedish seafloor adjacent to coastally located former pulp and paper industries. These deposits contain concentrations of hazardous substances that exceed national background levels and contravene national environmental quality objectives (EQOs). In this study of metal fluxes from fibrous sediments using benthic flux chamber measurements (BFC) in situ we obtained detected fluxes of Co, Mo, Ni and Zn, but no fluxes of Pb, Hg and Cr. The absence of fluxes of some of the analyzed metals indicates particle bound transport of Pb, Cr and Hg from fiberbanks even though Hg might become methylated under anoxic conditions and, in that case, may enter the food chain. We found less metal fluxes than expected and thus emphasize the importance of in-situ flux measurements as a compliment to sediment metal concentrations within risk assessments of contaminated sediments.
|
|
| 7. |
- Goransson, Gunnel, et al.
(författare)
-
Assessing the Risk of Contaminant Dispersion From Fibrous Sediments of Industrial Origin
- 2021
-
Ingår i: Frontiers in Marine Science. - : Frontiers Media S.A.. - 2296-7745. ; 8
-
Tidskriftsartikel (refereegranskat)abstract
- Unregulated discharges of wastewater from pulp and paper factories resulted in the formation of relatively thick organic (cellulose) rich sediments in shallow waters along the Swedish coast. These deposits are known as fiberbanks and are contaminated by persistent organic pollutants (POPs), metals and methylmercury, which can be dispersed by diffusion and advective processes coupled to propeller wash, high river discharges, strong wind waves and submarine landslides. Based on a case study of polychlorinated biphenyls (PCBs), one group of prevalent POPs in the fiberbanks, we present a probabilistic approach to estimate the potential risk of dispersion of fiberbank contaminants. The approach allows for estimation of the dispersal pathways that dominates the risk within a given time and provides more insight about the significance of various dispersion processes. We show that it is highly likely that chemical diffusion and advection triggered by ship-induced resuspension will disperse PCBs (sum of seven congeners; sigma 7PCB) above a threshold level for environmental impact, while the likelihood of river and wind-wave generated resuspension dispersion pathways are lower (similar to 20%, respectively). We further show that there is approximately 5% likelihood that a submarine landslide will disperse sigma 7PCB above the threshold level. The study implies that the governing parameters for risk assessment specifically should include reliable data on contaminant concentration, water depth above the fiberbank, estimation of concerned fiberbank areas, time duration of erosive fluid flows and measured diffusion. The approach provides insight into the importance of various dispersion processes. We suggest that it can be applied to support risk assessment, especially when there are limited available data and/or knowledge about the system under study.
|
|
| 8. |
- Hyttinen, O., et al.
(författare)
-
Deglaciation dynamics of the Fennoscandian Ice Sheet in the Kattegat, the gateway between the North Sea and the Baltic Sea Basin
- 2021
-
Ingår i: Boreas. - : John Wiley & Sons. - 0300-9483 .- 1502-3885. ; 50:2, s. 351-368
-
Tidskriftsartikel (refereegranskat)abstract
- This paper presents an age–depth model based on an ultra-high-resolution, 80-m-thick sedimentary succession from a marine continental shelf basin, the Kattegat. This is an area of dynamic deglaciation of the Fennoscandian Ice Sheet during the Late Pleistocene. The Kattegat is also a transitional area between the saline North Sea and the brackish Baltic Sea. As such, it records general development of currents and exchange between these two systems. Data for the succession were provided through the Integrated Ocean Drilling Program Site M0060. The site indicates onset of deglaciation at c. 18 ka BP and relatively continuous sedimentation until 13 ka BP. At this point, sediments record a hiatus until c. 9–7 ka BP. The uppermost sedimentary unit contains redeposited material, but it is estimated to represent only the last c. 9–7 ka BP. The age–depth model is based on 17 select, radiocarbon-dated samples and is integrated with a set of physical and chemical proxies. The integrated records provide novel constraints on the timing of major palaeoenvironmental changes, such as the transition from glaciomarine proximal to glaciomarine distal and marine conditions, and their connections to known major events and processes in the region and the North Atlantic. Depositional evidence specifically documents connections between the Fennoscandian Ice Sheet behaviour and atmospheric and oceanic warming. Glacial retreat may have also depended on topographic factors such as changes in basin width and depth, linked to relative sea level changes and land uplift. The results indicate an early response of the Fennoscandian Ice Sheet to changing climate, and the ice sheet's possible influence on oceanic circulation during the Late Pleistocene deglaciation.
|
|
| 9. |
- Hyttinen, O., et al.
(författare)
-
Holocene stratigraphy of the Ångermanälven River estuary, Bothnian Sea
- 2017
-
Ingår i: Geo-Marine Letters. - : Springer. - 0276-0460 .- 1432-1157. ; 37:3, s. 273-288
-
Tidskriftsartikel (refereegranskat)abstract
- This study explores the Holocene depositional succession at the IODP Expedition 347 sites M0061 and M0062 in the vicinity of the Ångermanälven River estuary in the Bothnian Sea sector of the Baltic Sea in northern Scandinavia. Site M0061 is located in a coastal offshore setting (87.9 m water depth), whereas site M0062 is fully estuarine (69.3 m water depth). The dataset comprises acoustic profiles and sediment cores collected in 2007 and late 2013 respectively. Three acoustic units (AUs) were recognized. Lowermost AU1 is interpreted as a poorly to discontinuous stratified glaciofluvial deposit, AU2 as a stratified conformable drape of glaciolacustrine origin, and AU3 as a poorly stratified to stratified mud drift. A strong truncating reflector separates AU2 and AU3. Three lithological units (LUs) were defined in the sediment cores. LU1 consists of glaciofluvial sand and silt gradating into LU2, which consists of glaciolacustrine varves. A sharp contact interpreted as a major unconformity separates LU2 from the overlying LU3 (brackish-water mud). In the basal part of LU3, one debrite (site M0061) or two debrites (site M0062) were recognized. Information yielded from sediment physical properties (magnetic susceptibility, natural gamma ray, dry bulk density), geochemistry (total carbon, total organic carbon, total inorganic carbon and nitrogen), and grain size support the LU division. The depositional succession was formally subdivided into two alloformations: the Utansjö Alloformation and overlying Hemsön Alloformation; the Utansjö Alloformation was further subdivided into two lithostratigraphic formations: the Storfjärden and Åbordsön formations. The Storfjärden (sandy outwash) and Åbordsön (glaciolacustrine rhythmite) formations represent a glacial retreat systems tract, which started at ca. 10.6 kyr BP. Their deposition was mainly controlled by meltwater from the retreating ice margin, glacio-isostatic land uplift and the regressive (glacial) lake level. The Hemsön Alloformation (organic-rich brackish-water mud) represents a period of forced regression, starting possibly at ca. 9.5 kyr BP. At about 7 kyr BP, brackish water reached the study area as a result of the mid-Holocene marine flooding of the Baltic Sea Basin, but the rapid land uplift soon surpassed the associated (Littorina) transgression. Changed near-bottom current patterns, caused by the establishment of a permanent halocline, and the reduced sediment consistency caused by increased organic deposition resulted in a sharp and erosional base of the brackish-water mud. Estuarine processes and salinity stratification at site M0062 started to play a more important role. This study applies a combined allostratigraphic and lithostratigraphic approach over the conventional Baltic Sea stages. This approach makes it more straightforward to study this Baltic Sea deglaciation–postglacial sequence and compare it to other formerly glaciated shallow sea estuaries.
|
|
| 10. |
- Hällberg, Lars Petter, et al.
(författare)
-
Magnetic susceptibility parameters as proxies for desert sediment provenance
- 2020
-
Ingår i: Aeolian Research. - : Elsevier BV. - 1875-9637 .- 2212-1684. ; 46
-
Tidskriftsartikel (refereegranskat)abstract
- Magnetic susceptibility in sediments has been thoroughly studied as a paleoenvironmental proxy over the last decades. However, it is unknown to what extent magnetic susceptibility variation is also a diagnostic of different sediment sources. Here we investigate if multiple magnetic susceptibility-based parameters can effectively be used as sediment source indicators. New magnetic property data from the Mu Us and Tengger Deserts in China are compared to previously known sediment provenance based on other well-established proxies. To assess the magnetic properties of these deserts, magnetic susceptibility and its out-of-phase component, its dependence on frequency, temperature and low-field amplitude are analyzed. Our results indicate similar sources for the western Mu Us Desert and the Tengger Desert and a distinct source for the eastern Mu Us, in-line with previously hypothesized provenance patterns. However, magnetic properties within the Tengger Desert sediments are homogenous, which may suggest a uniform provenance for the entire Tengger Desert, that the sediments are greatly reworked, or similar magnetic properties in potential multiple source regions. Magnetite is the major magnetic mineral in the study area and the dominant causes for divergence in magnetic properties are the magnetic mineral concentration and domain state. The results here, in particular from the Mu Us, suggest considerable promise for using magnetic susceptibility parameters in desert sediment provenance research.
|
|
