| 1. |
- Vinko, S. M., et al.
(författare)
-
Electronic Structure of an XUV Photogenerated Solid-Density Aluminum Plasma
- 2010
-
Ingår i: Physical Review Letters. - 0031-9007 .- 1079-7114. ; 104:22, s. 225001-
-
Tidskriftsartikel (refereegranskat)abstract
- By use of high intensity XUV radiation from the FLASH free-electron laser at DESY, we have created highly excited exotic states of matter in solid-density aluminum samples. The XUV intensity is sufficiently high to excite an inner-shell electron from a large fraction of the atoms in the focal region. We show that soft-x-ray emission spectroscopy measurements reveal the electronic temperature and density of this highly excited system immediately after the excitation pulse, with detailed calculations of the electronic structure, based on finite-temperature density functional theory, in good agreement with the experimental results.
|
|
| 2. |
- Hau-Riege, S. P., et al.
(författare)
-
Wavelength dependence of the damage threshold of inorganic materials under extreme-ultraviolet free-electron-laser irradiation
- 2009
-
Ingår i: Applied Physics Letters. - : AIP Publishing. - 0003-6951 .- 1077-3118. ; 95:11, s. 111104-111104-3
-
Tidskriftsartikel (refereegranskat)abstract
- We exposed bulk SiC and films of SiC and B4C to single 25 fs long free-electron-laser pulses with wavelengths between 13.5 and 32 nm. The materials are candidates for x-ray free-electron laser optics. We found that the threshold for surface-damage of the bulk SiC samples exceeds the fluence required for thermal melting at all wavelengths. The damage threshold of the film sample shows a strong wavelength dependence. For wavelengths of 13.5 and 21.7 nm, the damage threshold is equal to or exceeds the melting threshold, whereas at 32 nm the damage threshold falls below the melting threshold.
|
|
| 3. |
- Nelson, A. J., et al.
(författare)
-
Soft x-ray free electron laser microfocus for exploring matter under extreme conditions
- 2009
-
Ingår i: Optics Express. - 1094-4087. ; 17:20, s. 18271-18278
-
Tidskriftsartikel (refereegranskat)abstract
- We have focused a beam (BL3) of FLASH (Free-electron LASer in Hamburg: lambda = 13.5 nm, pulse length 15 fs, pulse energy 10-40 mu J, 5Hz) using a fine polished off-axis parabola having a focal length of 270 mm and coated with a Mo/Si multilayer with an initial reflectivity of 67% at 13.5 nm. The OAP was mounted and aligned with a picomotor controlled six-axis gimbal. Beam imprints on poly(methyl methacrylate) -PMMA were used to measure focus and the focused beam was used to create isochoric heating of various slab targets. Results show the focal spot has a diameter of <= 1 mu m. Observations were correlated with simulations of best focus to provide further relevant information.
|
|
| 4. |
- Chalupsky, J., et al.
(författare)
-
Characteristics of focused soft X-ray free-electron laser beam determined by ablation of organic molecular solids
- 2007
-
Ingår i: Optics Express. - 1094-4087. ; 15:10, s. 6036-6043
-
Tidskriftsartikel (refereegranskat)abstract
- A linear accelerator based source of coherent radiation, FLASH (Free-electron LASer in Hamburg) provides ultra-intense femtosecond radiation pulses at wavelengths from the extreme ultraviolet (XUV; lambda< 100nm) to the soft X-ray (SXR; lambda<30nm) spectral regions. 25-fs pulses of 32-nm FLASH radiation were used to determine the ablation parameters of PMMA - poly ( methyl methacrylate). Under these irradiation conditions the attenuation length and ablation threshold were found to be (56.9 +/- 7.5) nm and similar to 2 mJ center dot cm(-2), respectively. For a second wavelength of 21.7 nm, the PMMA ablation was utilized to image the transverse intensity distribution within the focused beam at mu m resolution by a method developed here.
|
|
| 5. |
- Hau-Riege, S. P., et al.
(författare)
-
Damage threshold of inorganic solids under free-electron-laser irradiation at 32.5 nm wavelength
- 2007
-
Ingår i: Applied Physics Letters. - : AIP Publishing. - 0003-6951 .- 1077-3118. ; 90:17, s. 173128-
-
Tidskriftsartikel (refereegranskat)abstract
- Samples of B4C, amorphous C, chemical-vapor-deposition-diamond C, Si, and SiC were exposed to single 25 fs long pulses of 32.5 nm free-electron-laser radiation at fluences of up to 2.2 J/cm(2). The samples were chosen as candidate materials for x-ray free-electron-laser optics. It was found that the threshold for surface damage is on the order of the fluence required for thermal melting. For larger fluences, the crater depths correspond to temperatures on the order of the critical temperature, suggesting that the craters are formed by two-phase vaporization.
|
|
| 6. |
- Hau-Riege, S. P., et al.
(författare)
-
Force Field Benchmark of Organic Liquids : Density, Enthalpy of Vaporization, Heat Capacities, Surface Tension, Isothermal Compressibility, Volumetric Expansion Coefficient, and Dielectric Constant
- 2007
-
Ingår i: Physical Review Letters. - 0031-9007 .- 1079-7114. ; 98:14, s. 145502-
-
Tidskriftsartikel (refereegranskat)abstract
- At the recently built FLASH x-ray free-electron laser, we studied the reflectivity of Si/C multilayers with fluxes up to 3×1014W/cm2. Even though the nanostructures were ultimately completely destroyed, we found that they maintained their integrity and reflectance characteristics during the 25-fs-long pulse, with no evidence for any structural changes over lengths greater than 3Å. This experiment demonstrates that with intense ultrafast pulses, structural damage does not occur during the pulse, giving credence to the concept of diffraction imaging of single macromolecules.
|
|
| 7. |
- Iwan, Bianca S, et al.
(författare)
-
TOF-OFF : A method for determining focal positions in tightly focused free-electron laser experiments by measurement of ejected ions
- 2011
-
Ingår i: High Energy Density Physics. - : Elsevier BV. - 1574-1818. ; 7:4, s. 336-342
-
Tidskriftsartikel (refereegranskat)abstract
- Pulse intensities greater than 1017 Watt/cm2 were reached at the FLASH soft X-ray laser in Hamburg, Germany, using an off-axis parabolic mirror to focus 15 fs pulses of 5–70 μJ energy at 13.5 nm wavelength to a micron-sized spot. We describe the interaction of such pulses with niobium and vanadium targets and their deuterides. The beam produced craters in the solid targets, and we measured the kinetic energy of ions ejected from these craters. Ions with several keV kinetic energy were observed from craters approaching 5 μm in depth when the sample was at best focus. We also observed the onset of saturation in both ion acceleration and ablation with pulse intensities exceeding 1016 W/cm2, when the highest detected ion energies and the crater depths tend to saturate with increasing intensity. A general difficulty in working with micron and sub-micron focusing optics is finding the exact focus of the beam inside a vacuum chamber. Here we propose a direct method to measure the focal position to a resolution better than the Rayleigh length. The method is based on the correlation between the energies of ejected ions and the physical dimensions of the craters. We find that the focus position can be quickly determined from the ion time-of-flight (TOF) data as the target is scanned through the expected focal region. The method does not require external access to the sample or venting the vacuum chamber. Profile fitting employed to analyze the TOF data can extend resolution beyond the actual scanning step size.
|
|
| 8. |
- Hajkova, V., et al.
(författare)
-
X-ray laser-induced ablation of lead compounds
- 2011
-
Ingår i: DAMAGE TO VUV, EUV, AND X-RAY OPTICS III. - : SPIE.
-
Konferensbidrag (refereegranskat)abstract
- The recent commissioning of a X-ray free-electron laser triggered an extensive research in the area of X-ray ablation of high-Z, high-density materials. Such compounds should be used to shorten an effective attenuation length for obtaining clean ablation imprints required for the focused beam analysis. Compounds of lead (Z=82) represent the materials of first choice. In this contribution, single-shot ablation thresholds are reported for PbWO(4) and PbI(2) exposed to ultra-short pulses of extreme ultraviolet radiation and X-rays at FLASH and LCLS facilities, respectively. Interestingly, the threshold reaches only 0.11 J/cm(2) at 1.55 nm in lead tungstate although a value of 0.4 J/cm(2) is expected according to the wavelength dependence of an attenuation length and the threshold value determined in the XUV spectral region, i.e., 79 mJ/cm(2) at a FEL wavelength of 13.5 nm. Mechanisms of ablation processes are discussed to explain this discrepancy. Lead iodide shows at 1.55 nm significantly lower ablation threshold than tungstate although an attenuation length of the radiation is in both materials quite the same. Lower thermal and radiation stability of PbI(2) is responsible for this finding.
|
|
| 9. |
- Chalupsky, J, et al.
(författare)
-
Non-thermal desorption/ablation of molecular solids induced by ultra-short soft x-ray pulses
- 2009
-
Ingår i: Optics Express. - 1094-4087. ; 17:1, s. 208-217
-
Tidskriftsartikel (refereegranskat)abstract
- We report the first observation of single-shot soft x-ray laser induced desorption occurring below the ablation threshold in a thin layer of poly ( methyl methacrylate) - PMMA. Irradiated by the focused beam from the Free-electron LASer in Hamburg ( FLASH) at 21.7nm, the samples have been investigated by atomic-force microscope (AFM) enabling the visualization of mild surface modifications caused by the desorption. A model describing non-thermal desorption and ablation has been developed and used to analyze single-shot imprints in PMMA. An intermediate regime of materials removal has been found, confirming model predictions. We also report below-threshold multiple-shot desorption of PMMA induced by high-order harmonics (HOH) at 32nm. Short-time exposure imprints provide sufficient information about transverse beam profile in HOH's tight focus whereas long-time exposed PMMA exhibits radiation-initiated surface hardening making the beam profile measurement infeasible. (C) 2008 Optical Society of America
|
|
