| 1. |
- Asplund, Maria, 1978-
(författare)
-
Conjugated Polymers for Neural Interfaces : Prospects, possibilities and future challenges
- 2009
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Within the field of neuroprosthetics the possibility to use implanted electrodes for communication with the nervous system is explored. Much effort is put into the material aspects of the electrode implant to increase charge injection capacity, suppress foreign body response and build micro sized electrode arrays allowing close contact with neurons. Conducting polymers, in particular poly(3,4-ethylene dioxythiophene) (PEDOT), have been suggested as materials highly interesting for such neural communication electrodes. The possibility to tailor the material both mechanically and biochemically to suit specific applications, is a substantial benefit with polymers when compared to metals. PEDOT also have hybrid charge transfer properties, including both electronic and ionic conduction, which allow for highly efficient charge injection. Part of this thesis describes a method of tailoring PEDOT through exchanging the counter ion used in electropolymerisation process. Commonly used surfactants can thereby be excluded and instead, different biomolecules can be incorporated into the polymer. The electrochemical characteristics of the polymer film depend on the ion. PEDOT electropolymerised with heparin was here determined to have the most advantageous properties. In vitro methods were applied to confirm non-cytotoxicity of the formed PEDOT:biomolecular composites. In addition, biocompatibility was affirmed for PEDOT:heparin by evaluation of inflammatory response and neuron density when implanted in rodent cortex. One advantage with PEDOT often stated, is its high stability compared to other conducting polymers. A battery of tests simulating the biological environment was therefore applied to investigate this stability, and especially the influence of the incorporated heparin. These tests showed that there was a decline in the electroactivity of PEDOT over time. This also applied in phosphate buffered saline at body temperature and in the absence of other stressors. The time course of degradation also differed depending on whether the counter ion was the surfactant polystyrene sulphonate or heparin, with a slightly better stability for the former. One possibility with PEDOT, often overlooked for biological applications, is the use of its semi conducting properties in order to include logic functions in the implant. This thesis presents the concept of using PEDOT electrochemical transistors to construct textile electrode arrays with in-built multiplexing. Using the electrolyte mediated interaction between adjacent PEDOT coated fibres to switch the polymer coat between conducting and non conducting states, then transistor function can be included in the conducting textile. Analogue circuit simulations based on experimentally found transistor characteristics proved the feasibility of these textile arrays. Developments of better polymer coatings, electrolytes and encapsulation techniques for this technology, were also identified to be essential steps in order to make these devices truly useful. In summary, this work shows the potential of PEDOT to improve neural interfaces in several ways. Some weaknesses of the polymer and the polymer electronics are presented and this, together with the epidemiological data, should point in the direction for future studies within this field.
|
|
| 2. |
- Bianchi, Michele, et al.
(författare)
-
Poly(3,4‐ethylenedioxythiophene)‐Based Neural Interfaces for Recording and Stimulation: Fundamental Aspects and In Vivo Applications
- 2022
-
Ingår i: Advanced Science. - : John Wiley & Sons. - 2198-3844. ; 9:12
-
Forskningsöversikt (refereegranskat)abstract
- Next‐generation neural interfaces for bidirectional communication with the central nervous system aim to achieve the intimate integration with the neural tissue with minimal neuroinflammatory response, high spatio‐temporal resolution, very high sensitivity, and readout stability. The design and manufacturing of devices for low power/low noise neural recording and safe and energy‐efficient stimulation that are, at the same time, conformable to the brain, with matched mechanical properties and biocompatibility, is a convergence area of research where neuroscientists, materials scientists, and nanotechnologists operate synergically. The biotic–abiotic neural interface, however, remains a formidable challenge that prompts for new materials platforms and innovation in device layouts. Conductive polymers (CP) are attractive materials to be interfaced with the neural tissue and to be used as sensing/stimulating electrodes because of their mixed ionic‐electronic conductivity, their low contact impedance, high charge storage capacitance, chemical versatility, and biocompatibility. This manuscript reviews the state‐of‐the‐art of poly(3,4‐ethylenedioxythiophene)‐based neural interfaces for extracellular recording and stimulation, focusing on those technological approaches that are successfully demonstrated in vivo. The aim is to highlight the most reliable and ready‐for‐clinical‐use solutions, in terms of materials technology and recording performance, other than spot major limitations and identify future trends in this field.
|
|
| 3. |
- Boehler, Christian, et al.
(författare)
-
Tutorial: guidelines for standardized performance tests for electrodes intended for neural interfaces and bioelectronics
- 2020
-
Ingår i: Nature Protocols. - : Springer Nature. - 1754-2189 .- 1750-2799. ; 15:11, s. 3557-3578
-
Forskningsöversikt (refereegranskat)abstract
- Implantable neural interfaces advance the possibilities for neuroscientists to study the brain. They are also promising for use in a multitude of bioelectronic therapies. Electrode technology plays a central role in these developments, as the electrode surfaces form the physical interfaces between technology and the biological targets. Despite this, a common understanding of how electrodes should best be evaluated and compared with respect to their efficiency in recording and stimulation is currently lacking. Without broadly accepted performance tests, it is difficult to rank the many suggestions for electrode materials available in the literature, or to identify where efforts should be focused to advance the field most efficiently. This tutorial critically discusses the most relevant performance tests for characterization of neural interface electrodes and explains their implementation, interpretation and respective limitations. We propose a unified standard to facilitate transparent reporting on electrode performance, promote efficient scientific process and ultimately accelerate translation into clinical practice.
|
|
| 4. |
- Böhler, Christian, et al.
(författare)
-
Multilayer Arrays for Neurotechnology Applications (MANTA): Chronically Stable Thin-Film Intracortical Implants
- 2023
-
Ingår i: Advanced Science. - : John Wiley & Sons. - 2198-3844. ; 10:14
-
Tidskriftsartikel (refereegranskat)abstract
- Flexible implantable neurointerfaces show great promise in addressing one of the major challenges of implantable neurotechnology, namely the loss of signal connected to unfavorable probe tissue interaction. The authors here show how multilayer polyimide probes allow high-density intracortical recordings to be combined with a reliable long-term stable tissue interface, thereby progressing toward chronic stability of implantable neurotechnology. The probes could record 10–60 single units over 5 months with a consistent peak-to-peak voltage at dimensions that ensure robust handling and insulation longevity. Probes that remain in intimate contact with the signaling tissue over months to years are a game changer for neuroscience and, importantly, open up for broader clinical translation of systems relying on neurotechnology to interface the human brain.
|
|
| 5. |
- Lewis, Christopher M., et al.
(författare)
-
Recording Quality Is Systematically Related to Electrode Impedance
- 2024
-
Ingår i: Advanced healthcare materials. - 2192-2640 .- 2192-2659. ; In Press
-
Tidskriftsartikel (refereegranskat)abstract
- Extracellular recordings with planar microelectrodes are the gold standard technique for recording the fast action potentials of neurons in the intact brain. The introduction of microfabrication techniques has revolutionized the in vivo recording of neuronal activity and introduced high-density, multi-electrode arrays that increase the spatial resolution of recordings and the number of neurons that can be simultaneously recorded. Despite these innovations, there is still debate about the ideal electrical transfer characteristics of extracellular electrodes. This uncertainty is partly due to the lack of systematic studies comparing electrodes with different characteristics, particularly for chronically implanted arrays over extended time periods. Here a high-density, flexible, and thin-film array is fabricated and tested, containing four distinct electrode types differing in surface material and surface topology and, thus, impedance. It is found that recording quality is strongly related to electrode impedance with signal amplitude and unit yield negatively correlated to impedance. Electrode impedances are stable for the duration of the experiment (up to 12 weeks) and recording quality does not deteriorate. The findings support the expectation from the theory that recording quality will increase as impedance decreases.
|
|
| 6. |
|
|
| 7. |
- Vomero, Maria, et al.
(författare)
-
Conformable polyimide-based μECoGs : Bringing the electrodes closer to the signal source
- 2020
-
Ingår i: Biomaterials. - : Elsevier. - 0142-9612 .- 1878-5905. ; 255
-
Tidskriftsartikel (refereegranskat)abstract
- Structural biocompatibility is a fundamental requirement for chronically stable bioelectronic devices. Newest neurotechnologies are increasingly focused on minimizing the foreign body response through the development of devices that match the mechanical properties of the implanted tissue and mimic its surface composition, often compromising on their robustness. In this study, an analytical approach is proposed to determine the threshold of conformability for polyimide-based electrocorticography devices. A finite element model was used to quantify the depression of the cortex following the application of devices mechanically above or below conformability threshold. Findings were validated in vivo on rat animal models. Impedance measurements were performed for 40 days after implantation to monitor the status of the biotic/abiotic interface with both conformable and non-conformable implants. Multi-unit activity was then recorded for 12 weeks after implantation using the most compliant device type. It can therefore be concluded that conformability is an essential prerequisite for steady and reliable implants which does not only depend on the Young's modulus of the device material: it strongly relies on the relation between tissue curvature at the implantation site and corresponding device's thickness and geometry, which eventually define the moment of inertia and the interactions at the material-tissue interface.
|
|
| 8. |
- Vomero, Maria, et al.
(författare)
-
On the longevity of flexible neural interfaces: Establishing biostability of polyimide-based intracortical implants
- 2022
-
Ingår i: Biomaterials. - : Elsevier. - 0142-9612 .- 1878-5905. ; 281
-
Tidskriftsartikel (refereegranskat)abstract
- Flexible neural implants are extremely favored, as the most successful strategy to promote probe-tissue integration and avoid severe gliosis relies on reducing the mechanical mismatch between probe and brain tissue. But what are the realistic requirements for achieving chronic recording stability? What are the critical dimensions and main factors determining glial scar-free device integration? To answer these questions, two types of hair-sized polyimide-based flexible intracortical (PIXI) arrays were fabricated, differing only in their cross-sectional area. Chronic tissue reaction to both types was evaluated in rats, and in different implantation setups. Interfacial stresses were found to play a critical role in long-term tissue integration. Still, all the devices provided high quality chronic recordings of single units and inflammatory gene expression was not significantly upregulated for larger devices. Our study points out that the most relevant factor in eliciting FBR is played by mechanical probe-tissue interactions, that polyimide is well tolerated by the tissue, and that a holistic design - considering material properties, geometrical dimensions and assembling techniques - is the key towards longevity and long-term performance of intracortical probes. The optimization of only one parameter did not yet lead to the successful translation of research accomplishments into chronic preclinical and clinical applications.
|
|
| 9. |
- Waelbroeck, Claire, et al.
(författare)
-
Consistently dated Atlantic sediment cores over the last 40 thousand years
- 2019
-
Ingår i: Scientific Data. - : NATURE PUBLISHING GROUP. - 2052-4463. ; 6
-
Tidskriftsartikel (refereegranskat)abstract
- Rapid changes in ocean circulation and climate have been observed in marine-sediment and ice cores over the last glacial period and deglaciation, highlighting the non-linear character of the climate system and underlining the possibility of rapid climate shifts in response to anthropogenic greenhouse gas forcing. To date, these rapid changes in climate and ocean circulation are still not fully explained. One obstacle hindering progress in our understanding of the interactions between past ocean circulation and climate changes is the difficulty of accurately dating marine cores. Here, we present a set of 92 marine sediment cores from the Atlantic Ocean for which we have established age-depth models that are consistent with the Greenland GICC05 ice core chronology, and computed the associated dating uncertainties, using a new deposition modeling technique. This is the first set of consistently dated marine sediment cores enabling paleoclimate scientists to evaluate leads/lags between circulation and climate changes over vast regions of the Atlantic Ocean. Moreover, this data set is of direct use in paleoclimate modeling studies.
|
|
| 10. |
- Wilson, Stephanie J., et al.
(författare)
-
Global subterranean estuaries modify groundwater nutrient loading to the ocean
- 2024
-
Ingår i: Limnology And Oceanography Letters. - 2378-2242.
-
Tidskriftsartikel (refereegranskat)abstract
- Terrestrial groundwater travels through subterranean estuaries before reaching the sea. Groundwater-derived nutrients drive coastal water quality, primary production, and eutrophication. We determined how dissolved inorganic nitrogen (DIN), dissolved inorganic phosphorus (DIP), and dissolved organic nitrogen (DON) are transformed within subterranean estuaries and estimated submarine groundwater discharge (SGD) nutrient loads compiling > 10,000 groundwater samples from 216 sites worldwide. Nutrients exhibited complex, nonconservative behavior in subterranean estuaries. Fresh groundwater DIN and DIP are usually produced, and DON is consumed during transport. Median total SGD (saline and fresh) fluxes globally were 5.4, 2.6, and 0.18 Tmol yr−1 for DIN, DON, and DIP, respectively. Despite large natural variability, total SGD fluxes likely exceed global riverine nutrient export. Fresh SGD is a small source of new nutrients, but saline SGD is an important source of mostly recycled nutrients. Nutrients exported via SGD via subterranean estuaries are critical to coastal biogeochemistry and a significant nutrient source to the oceans.
|
|
